HTC J butterfly HTL21 ( AU ) repair problem
 

Hi Team Riff, my phone is htc j butterfly HTL21 ( AU ) when i unlock phone with tool, so phone is failure, i repair phone with box Riff normal phone not work, i stick recovery partiton - Cid - IMEI, phone work but becom htc Droid DNA, i non understand this, so i my phone hang on logo, i find rom stock for it, it's rom stock : RUU_DLX_WL_JB_45_VERIZON_WWE_1.15.605.4_Radio_1.00 .00.1023_3_NV_VZW_1.98_002_release_290923_signed, flash it ok but phone not work.

P/s : I try flash file dump Droid DNA for it for nguyento1986@thank so much, but phone status the same. I think if i flash phone with file dump of phone butterfly HTL21, i think phone work....but i don't have file full dump of phone htc j butterfly....Pls help me.

8/15/2013 4:14:48 PM] [START OPERATION_ID = RESURRECT]
[8/15/2013 4:20:45 PM] Open serial port...OK
[8/15/2013 4:20:45 PM] Connecting to the RIFF Box...OK
[8/15/2013 4:20:45 PM] Firmware Version: 1.36, JTAG Manager Version: 1.50
[8/15/2013 4:20:45 PM] Selected Resurrector: [HTC Droid DNA (PL8320000) V1.0.4926.47214]
[8/15/2013 4:20:45 PM]
[8/15/2013 4:20:45 PM] Connecting to the dead body...OK
[8/15/2013 4:20:45 PM] Detected dead body ID: 0x107190E1 - CORRECT!
[8/15/2013 4:20:45 PM] Set I/O Voltage reads as 1.81V, TCK Frequency is 2 MHz
[8/15/2013 4:20:45 PM]
[8/15/2013 4:20:45 PM] Resurrection sequence started.
[8/15/2013 4:20:45 PM] Establish communication with the phone...OK
[8/15/2013 4:20:45 PM] Initializing internal hardware configuration...OK
[8/15/2013 4:20:45 PM] Uploading resurrector data into memory...OK
[8/15/2013 4:20:45 PM] Starting communication with resurrector...OK
[8/15/2013 4:20:45 PM]
[8/15/2013 4:20:45 PM] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
[8/15/2013 4:20:45 PM] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)
[8/15/2013 4:20:45 PM]
[8/15/2013 4:20:45 PM] Flashing the dead body...OK
[8/15/2013 4:20:45 PM] Resurrection complete!
[8/15/2013 4:20:45 PM] [FINISH OPERATION_ID = RESURRECT]

http://i988.photobucket.com/albums/a...psea2d422a.jpghttp://i988.photobucket.com/albums/a...ps512892b0.jpghttp://i988.photobucket.com/albums/a...ps42490dc6.jpg

Hi,
What You mean with "unlock phone with tool" ? What tool ?

Yes, i follow solution unlock here, i've done unclock 4 units like that and no problem, so before i unlock it and forget s-off , i change cid and i had problem , phone not power.

In that case i think You need to restore PGFS partition from good phone.

I can flash file dump HTC_ButterFly_X920e_Alive_BN to phone , sir ? I think my phone modern x920x...

Just flash PGFS partition.

Thank sir, so can I ask you a question, i have one phone htc butterfly HTL21 differen, lost boot, i should backup PGFS partition first after repair via PL8320000-DNA by Riff and flash file backup to phone ? sori but i don't know DLX and MONARUDO on Bootloader -i think difference together. My phone come back with rom cook but lost baseband and imei. I try repair imei and wifi but bootloader come back locked and s-on, phone not work.Thank sir.

http://i988.photobucket.com/albums/a...ps38d9b5d8.jpghttp://i988.photobucket.com/albums/a...ps9fd7d2a6.jpg

I almost broke my neck here. :D

Yes, backup PGFS first.

Hi sir, i flash file PGFS from file backup 256mb but not ok, imei and baseband not apprecen.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.36, JTAG Manager Version: 1.50
Selected Resurrector: [HTC Droid DNA (PL8320000) V1.0.4926.47214]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 2 MHz
Settings Code: 0x240107000000000000000003A3E00000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Writting FLASH1 memory from 0x000000060200 to 0x000007FFBDFF
Completed in 00:09:56.626 (Average Transfer Rate: 219.02 kB/s)

P/s : i have file HTC_ButterFly_X920e_Alive_BN.zip of MR BABAK NURI but i don't know pass, please help me .

Thanks so much.

Please help me save my phone. Thank so much.

You are so lazy :D, why don't turn around your screen :D

for me seems you and Babak have dump from HTC 801n (first 640Mb) , lol.

should have HTC HTL21 good dump (same length)

Hi
Why Not Contact Me Via ICQ With Connected Phone To RIFF Box??
Also You need this: Index of /remote

Thanks

Hi sir, i try connect RemoteParyPart and box Riff with deverloper but i see report wrong user and pass, sori i don't know how to use id and password for it . Please help me. Thanks so much.

My ICQ : [email protected], please add me, thanks sir.