htc nexsus one pb99100 boot repair help
 

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [HTC Nexus V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

Hi
For Repair HTC Nexus You Need Connect Only USB( No Need Battrey) Also Set Speed At Max TCK
----
Any Way Please Check Connection (JTAG Wires) Or Maybe HW Damage
Please Read: RIFF JTAG Box FAQ - ERROR: Read/Write memory failed during H/W Init