i9023 NEXUS S Boot Repair Problem

[ken6430841]

use sptbox change imei

[Vitalich]

Thanks...
But I don't have SPTBox yet.

Right now I have "progress" with I9023.
After reflashing with Odin (with EFS clear checkbox) Baseband version was corrected and IMEI was set as 004999/01/064000/0 as expected.
It is a little better than without IMEI at all.

Thanks again.
Now I know what I have to do.

[Little_Master]

I tried with and without Gremlin Option ,, and With and Without Recovery Selection ..


But Phones still on blackscreen. Only two lights comes on bottom keypad.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Samsung I9023]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 800 kHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)

Flashing the dead body...OK
Resurrection complete!

Anything Else I can Try ???

LITTLE MASTER

[hamidraja]

iv got the same problem any idea's

[livemobi]

Why no one cares this problem?

[Little_Master]

Originally Posted by livemobi

Why no one cares this problem?

Even Im still wating for reply.. I still got phone


LITTLE MASTER

[legija]

i9020 and i9023 were already tested, can You please write more about phone history ?

[sen-i]

i need fullflash for i9020 , my one is i9020T
but imei problem , i9023 have enother lcd as i9020 , if i flash my i9020 as i9023 i have no picters , only to green line on lcd , but i can going to downloadmodus , and flash it with odin

[Little_Master]

Originally Posted by Little_Master

Even Im still wating for reply.. I still got phone


LITTLE MASTER

This is my own phone..

Phone was working fine. I was trying to root it. After root , It stucked on LOCK OPENED screen.

I flashed with SPT BOX.. But SPT BOX didn't have CSC file, And i Flashed it without that file.

At the end , it stuck on Black Screen , and only two lights at the bottom.

Boot Repair Success by RIFF, But still have same condition

LITTLE MASTER

[legija]

Black screen means nothing, explain please can You enter download mode or not, meaning is phone detected on USB port by PC ?

[Little_Master]

Originally Posted by legija

Black screen means nothing, explain please can You enter download mode or not, meaning is phone detected on USB port by PC ?

Phone not goes into Downalod Mode.

When i connect it to PC , PC make sound of connecting , But nothing appears in Device Manager

LITTLE MASTER

[connexion2005]

Do you have a JIG to enter download mode?

MobileTechVideos » Products

I use my JIG on all SGS devices to enter download mode. Key combinations do not always work. That link is my personal site.

[hackgsm]

http://forum.gsmhosting.com/vbb/f634...5/#post7516005

[Little_Master]

I have used jig .. but no work

..

Just recently , I have successfully Flashed phone with Z3x Box.

But

Now, phone is stuck on GOOGLE Screen with Opened Locked LOGO..

DOn't know how to revive it from this stage.

Thanks to RIFF , to make phone able to flash

LITTLE MASTER

[Little_Master]

Phone Alive :-)

Thanks goes to

RIFF BOX - To make phone able to recognise with PC
Z3x - To flash the phone , to able to go upto GOOGLE LOGO
TSAR3000 - To Fully Flash the phone with 2.3.4

Firmware Update Steps:
 
Run Samsung I9020 Google Nexus S Downloader.
Put the phone into Download Mode: Press Middle of Volume Key and Connect USB cable.
You can see ( Downloading...) on the phone LCD.
The program must read the Com number it takes.
Click BOOT button and select:Bootloader_I9020xxxxx.tar.md5
Click Phone button and select: MODEM_I9020xxxxx_REV_00_CL912571_SIGNED.tar.md5
Click PDA button and select: PDA_SOJU_xxxx.....tar.md5
Click CSC button and select: DGS_I9020_EUR.tar
Click Start button and the update process will start.
Do not touch or remove anything till the device rebooted and you can see PASS word on the program.

FULL FLASH FILE 2.3.4


LITTLE MASTER