i9100g jtag pinout need - GSM-Forum

ahmertelecom · 10-11-2011, 12:35

can riff repair dead phone booot i9100g plz help

RNC_EBM · 10-11-2011, 12:42

Quote:

Originally Posted by ahmertelecom

can riff repair dead phone booot i9100g plz help

07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)

Quote:

Samsung I9108 is based on the OMAP4430 Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface. There is a big variety of versions of Galaxy II devices: GT-I9100, GT-I9100G, GT-I9100L, GT-I9100M, GT-I9100T, GT-I9101, GT-I9103, GT-I9108, GT-I9188, and maybe more. Some of them are based on different hardware platform – the Samsung S5PV310 (Cortex-A9 Dual-Core). Thus make sure first which exact hardware version you have on hands.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
Current DLL is still a beta one. It will work only with phones which have killed X-Loader.

FIRMWARE:

GT-I9100G_XME_I9100GDZKI1_I9100GDZKI1_I9100GOLCKI1

br

[ DropBox ] [ iPad / SGS-i9000 / GT-P1000 / x10 Mini ]

Aamir_Zia · 10-26-2011, 16:17

this phone has different pinouts than i9100 ... still not supported by Riff or ORt

**legija** · 10-26-2011, 18:16

There are two dedicated i9100G DLL-s released today.

rifziyad · 10-26-2011, 23:50

Quote:

Originally Posted by legija

There are two dedicated i9100G DLL-s released today.

after resurrection full dead

before pc detect omap 4430 now nothing

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [Samsung i9100G XLoader+]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x03AB400000 Bytes)

Flashing the dead body...OK
Resurrection complete!

BABAK NURI · 10-30-2011, 00:45

yes,i have same problem in thread
http://forum.gsmhosting.com/vbb/f634...i9108-1364974/

i think release very soon by riff team and i think same as i9003-omap 3630

this phone have omap4430 and after totally dead phone go to sleep......and need sd_boot(anyway i think)

RNC_EBM · 10-30-2011, 04:10

Quote:

Originally Posted by BABAK NURI

yes,i have same problem in thread
http://forum.gsmhosting.com/vbb/f634...i9108-1364974/

i think release very soon by riff team and i think same as i9003-omap 3630

this phone have omap4430 and after totally dead phone go to sleep......and need sd_boot(anyway i think)

i9100g ALREADY SUPPORTED and

it was TESTED ME ALREADY 100% WORKING

here's the PROOF

br

[ DropBox ] [ iPad / SGS-i9000 / GT-P1000 / iPhone / x10 Mini ]

RNC_EBM · 10-30-2011, 04:31

/////////////////////////////////////////

sorry double post.

kindly delete this post

BABAK NURI · 10-30-2011, 16:04

no, not supported all model G....I Think different ....

your phone alive but just debug screen.....my phone totally dead after resurection...

RNC_EBM · 10-31-2011, 00:14

Quote:

Originally Posted by BABAK NURI

no, not supported all model G....I Think different ....

your phone alive but just debug screen.....my phone totally dead after resurection...

check this pinout

FROM RIFFBOX PINOUT

OTHER i9100g PINOUT [ after openning & BEFORE I TOUCH JTAG ]

NOTE:

i'm not the first to touch this i9100g, i don't know if im the 2nd or 3rd person to revived this i9100g, this came from part of MANILA, they send it to me to
revive it, and it was REVIVED. THANKS RIFFBOX

br

[ DropBox ] [ iPad / SGS-i9000 / GT-P1000 / iPhone / x10 Mini ]

RNC_EBM · 10-31-2011, 00:31

br

[ DropBox ] [ iPad / SGS-i9000 / GT-P1000 / iPhone / x10 Mini ]

RNC_EBM · 10-31-2011, 01:55

Quote:

Originally Posted by BABAK NURI

yes,i have same problem in thread
http://forum.gsmhosting.com/vbb/f634...i9108-1364974/

i think release very soon by riff team and i think same as i9003-omap 3630

this phone have omap4430 and after totally dead phone go to sleep......and need sd_boot(anyway i think)

also the same the one i've repaired

br

[ DropBox ] [ iPad / SGS-i9000 / GT-P1000 / iPhone ]

BABAK NURI · 10-31-2011, 12:52

yes..but pc no detected omap4430 after conect usb...just little sound and disconected

i try all diferent pinout and no detected....ofcorse before resurrect ,phone detected and resurect done but after done no power on, no debug screen and no detected by riff

but if select i9003 and put sd_magic detected by analize chain with FFFFFF ID

RNC_EBM · 10-31-2011, 13:00

Quote:

Originally Posted by BABAK NURI

yes..but pc no detected omap4430 after conect usb...just little sound and disconected

i try all diferent pinout and no detected....ofcorse before resurrect ,phone detected and resurect done but after done no power on, no debug screen and no detected by riff

but if select i9003 and put sd_magic detected by analize chain with FFFFFF ID

i think it has hardware problem regarding the ID

br

[ DropBox ] [ iPad / SGS-i9000 / GT-P1000 / iPhone ]

BABAK NURI · 10-31-2011, 13:18

NO NO NO......I Say if selected i9003 ,,,, show FFFFFFFF .....i9003 is 3630 or 3430 but i9100g is 4430......

10-11-2011, 12:35	#1 (permalink)
ahmertelecom No Life Poster Join Date: Dec 2005 Location: PAKISTAN Age: 35 Posts: 2,216 Member: 210880 Status: Offline Sonork: 100.1577765 Thanks Meter: 151	i9100g jtag pinout need can riff repair dead phone booot i9100g plz help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware Repair	2	07-23-2013 02:41
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

10-26-2011, 16:17	#3 (permalink)
Aamir_Zia No Life Poster Join Date: Dec 2003 Location: Karachi Pakistan Age: 38 Posts: 6,770 Member: 47321 Status: Offline Sonork: 100.54032 Thanks Meter: 497	this phone has different pinouts than i9100 ... still not supported by Riff or ORt

10-26-2011, 18:16	#4 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	There are two dedicated i9100G DLL-s released today.

10-30-2011, 00:45	#6 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	yes,i have same problem in thread http://forum.gsmhosting.com/vbb/f634...i9108-1364974/ i think release very soon by riff team and i think same as i9003-omap 3630 this phone have omap4430 and after totally dead phone go to sleep......and need sd_boot(anyway i think)

10-30-2011, 04:31	#8 (permalink)
RNC_EBM No Life Poster Join Date: Dec 2004 Location: PHILIPPINES Posts: 5,294 Member: 101860 Status: Offline Sonork: 100.1582168 100.77603 Thanks Meter: 6,036	///////////////////////////////////////// sorry double post. kindly delete this post

10-30-2011, 16:04	#9 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	no, not supported all model G....I Think different .... your phone alive but just debug screen.....my phone totally dead after resurection...

10-31-2011, 00:31	#11 (permalink)
RNC_EBM No Life Poster Join Date: Dec 2004 Location: PHILIPPINES Posts: 5,294 Member: 101860 Status: Offline Sonork: 100.1582168 100.77603 Thanks Meter: 6,036	br [ DropBox ] [ iPad / SGS-i9000 / GT-P1000 / iPhone / x10 Mini ]

10-31-2011, 12:52	#13 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	yes..but pc no detected omap4430 after conect usb...just little sound and disconected i try all diferent pinout and no detected....ofcorse before resurrect ,phone detected and resurect done but after done no power on, no debug screen and no detected by riff but if select i9003 and put sd_magic detected by analize chain with FFFFFF ID

10-31-2011, 13:18	#15 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	NO NO NO......I Say if selected i9003 ,,,, show FFFFFFFF .....i9003 is 3630 or 3430 but i9100g is 4430......