What mean tjhis error?

[debeliamark]

Connecting to the dead body...
ERROR: Set I/O Voltage to 1,80V failed. Real reading is 1,92V

This error come do not mean if phone is wired to box or not ...

[legija]

Hi,

You may have damaged box, contact me via ICQ, we'll check it up.

[debeliamark]

Originally Posted by legija

Hi,

You may have damaged box, contact me via ICQ, we'll check it up.

Just checked ( for sport ) with one ELF - seem all is fine and working :

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [HTC Elf]

Connecting to the dead body...OK
Detected dead body ID: 0x0692602F - CORRECT!
Set I/O Voltage reads as 3.37V, TCK Frequency is 6 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected a Not Initialized FLASH1 Chip ID: 0x4833/0xB7CC (512MB)

Preparing to upload USB Downloader...OK
Uploading the USB Downloader code ...OK
Resurrection complete!

Waiting at ICQ 75836713 - will give you a TeamViewer ID to get a info with own hands