plz help in m8910

[fiftycent112]

plz supporters help me after boot repair on riff box for samsung pixon m8910 the mobile can't take flash fiels it give me secuirty fail i make erase for rom1 1 and repair again then know it still the same

[fiftycent112]

i forget to post log file

[7/10/2011 9:57:12 PM] [START OPERATION_ID = RESURRECT]
[7/10/2011 9:57:38 PM] Open serial port...OK
[7/10/2011 9:57:38 PM] Connecting to the RIFF Box...OK
[7/10/2011 9:57:38 PM] Firmware Version: 1.20, JTAG Manager Version: 1.29
[7/10/2011 9:57:38 PM] Selected Resurrector: [Samsung M8910]
[7/10/2011 9:57:38 PM]
[7/10/2011 9:57:38 PM] Connecting to the dead body...OK
[7/10/2011 9:57:38 PM] Detected dead body ID: 0x07B76F0F - CORRECT!
[7/10/2011 9:57:38 PM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
[7/10/2011 9:57:38 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[7/10/2011 9:57:38 PM]
[7/10/2011 9:57:38 PM] Resurrection sequence started.
[7/10/2011 9:57:38 PM] Establish communication with the phone...OK
[7/10/2011 9:57:38 PM] Initializing internal hardware configuration...OK
[7/10/2011 9:57:38 PM] Uploading resurrector data into memory...OK
[7/10/2011 9:57:38 PM] Starting communication with resurrector...OK
[7/10/2011 9:57:38 PM]
[7/10/2011 9:57:38 PM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0058 (512MB)
[7/10/2011 9:57:38 PM] Flashing the dead body...OK
[7/10/2011 9:57:38 PM] Resurrection complete!

[legija]

"Security Fail" can be caused by few reasons :

- Phone battery not present or damaged
- You're trying to flash firmware with wrong bootloader revision
- Security actually failed

Check battery, and make sure to update bootloader first with downloader.