I9100 32GB dead boot repair problem

[alaminbg1]

Hello everyone i got problem by jtag I9100.

Help me to solve this problem.
Here is my log

Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I9100 V1.0.4850.415]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VZL00M, 0x000774000000 Bytes = 29.81 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VZL00M, 0x000000080000 Bytes = 0.50 MB)

No Resurrection Data is available for the eMMC Chip with Capacity = 29.81GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000

Thanks

[max292]

Hi bro did you see warning ⚠
no Resurrection Data is available for the eMMC Chip with Capacity = 29.81GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB

[max292]

If you have full flash try too flash first 512 Mb then put phone In download mode with jig

[alaminbg1]

Originally Posted by max292

If you have full flash try too flash first 512 Mb then put phone In download mode with jig

BROTHER ITS NOW dead. How to put it on download mode.