GSM-Forum - N7000 Dead boot Programming error...HELP!!!

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- RIFFBOX (https://forum.gsmhosting.com/vbb/f634/)

- - N7000 Dead boot Programming error...HELP!!! (https://forum.gsmhosting.com/vbb/f634/n7000-dead-boot-programming-error-help-1685170/)

N7000 Dead boot Programming error...HELP!!!

N7000 Dead boot Programming error...HELP!!!

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung N7000 V1.0.4860.58267]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
.
.
.
.WARNING: Programming Error (0x25) at 0x0000023F8000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000023FC000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x43 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000000001

need solution please...

ano po solution dito mga boss...

Walang bagay!
......palitan eMMC

Hi
This is clear case of damaged eMMC ....So,You Need Replace Chip

complete but,same problem dead...

Damage eMMC chip...

Quote:

thanks for help...

can go in to download mode?

if can go to download mode flash your phone to gingerbread dont upgrade to ics

Quote:

Originally Posted by mr.omphonx (Post 9558836)

can go in to download mode?

if can go to download mode flash your phone to gingerbread dont upgrade to ics

not working...cannot put on download mode...

ok maybe true like supporter say

ur phone have damage emmc

please repair emmc with other tool have support repair for emmc

if repair emmc not solved u must change emmc chip ic