i8160 Boot repair Success - GSM-Forum

Saeid_baran · 02-12-2013, 15:44

i8160 Boot repair Success

Frist In World

By: Rain_Saeid

meysam.karaji · 02-12-2013, 21:55

hi bro
I got 3 to repair boot I8160.

Not for the first time.

BY
Meysam Rezaei

..:ALAK:.. · 03-06-2013, 13:34

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB

Flashing the dead body...OK
Resurrection complete!

Reza2010 · 03-06-2013, 13:38

Hi to all:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.75V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB

Flashing the dead body...OK
Resurrection complete!

..::Thanh_gsm::.. · 03-07-2013, 22:29

Confirm I8160P can be repaired too, after repair you can flash I8160 files. Before repair, I8160p flash I8160 will lost boot, strange

BABAK NURI · 03-08-2013, 00:53

Quote:

Originally Posted by ..::Thanh_gsm::..

Confirm I8160P can be repaired too, after repair you can flash I8160 files. Before repair, I8160p flash I8160 will lost boot, strange

Hi
Because after "Resuurect" Phone Converted By Writing Some Needed Partitions To I8160....

bahsar333 · 05-03-2013, 18:50

i8160p not repire boot show error next ? plz hepl me

Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0xFFF00000 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x59): Communication is not established. Terminating.
؟؟؟

BABAK NURI · 05-03-2013, 22:09

Quote:

Originally Posted by bahsar333

i8160p not repire boot show error next ? plz hepl me

Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0xFFF00000 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x59): Communication is not established. Terminating.
؟؟؟

Hi
Please Connect USB cable to Phone,Then Install Driver From RIFF Directory
Then Press "Resurrect"

bahsar333 · 05-04-2013, 09:48

my bro think for sharing i connect cable usb and install driver sam problem ? plz help

what rj45

luis_fzc · 10-09-2013, 22:40

Works with i8160L?

frankerebus · 11-16-2013, 00:09

Can i use this DLL for repair an SGH-i577 from at&t ???

elementor · 04-23-2014, 20:42

I have a problem

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x51): Communication is not established. Terminating.

amanvir · 08-29-2014, 16:55

Can i use it with 8160L to repair dead boot?

canabasoo · 09-12-2014, 15:20

help repairt boot samsumng i8190l

gilabatu · 06-20-2015, 18:01

please help me...i need bootfile for repair emmc samsung gt i8160...thanks

02-12-2013, 15:44	#1 (permalink)
Saeid_baran Freak Poster Join Date: Jul 2011 Location: IRAN-ALBORZ city Posts: 126 Member: 1608742 Status: Offline Sonork: 100.1627272 Thanks Meter: 210	i8160 Boot repair Success i8160 Boot repair Success Frist In World By: Rain_Saeid

09-12-2014, 15:20	#14 (permalink)
canabasoo Insane Poster Join Date: Jul 2009 Location: colombia Posts: 85 Member: 1067857 Status: Offline Sonork: onix248 Thanks Meter: 3	help repairt boot samsumng i8190l help repairt boot samsumng i8190l

02-12-2013, 21:55	#2 (permalink)
meysam.karaji Registered User Join Date: Jul 2011 Location: IRAN-karaj Posts: 107 Member: 1613571 Status: Offline Sonork: 100.1615053 Thanks Meter: 57	hi bro I got 3 to repair boot I8160. Not for the first time. BY Meysam Rezaei

03-06-2013, 13:34	#3 (permalink)
..:ALAK:.. Freak Poster Join Date: Sep 2012 Location: BANGLADESH Posts: 329 Member: 1813575 Status: Offline Thanks Meter: 90	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I8160 V1.0.4705.16807] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB Flashing the dead body...OK Resurrection complete!

03-06-2013, 13:38	#4 (permalink)
Reza2010 No Life Poster Join Date: Mar 2011 Location: Pars Abad Age: 37 Posts: 527 Member: 1541831 Status: Offline Sonork: 100.1620784 Thanks Meter: 141	Hi to all: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I8160 V1.0.4705.16807] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.75V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB Flashing the dead body...OK Resurrection complete!

03-07-2013, 22:29	#5 (permalink)
..::Thanh_gsm::.. No Life Poster Join Date: Dec 2005 Location: Ha Noi - Viet Nam Age: 18 Posts: 1,289 Member: 207400 Status: Offline Sonork: 100.1582556 Thanks Meter: 262	Confirm I8160P can be repaired too, after repair you can flash I8160 files. Before repair, I8160p flash I8160 will lost boot, strange

05-03-2013, 18:50	#7 (permalink)
bahsar333 Freak Poster Join Date: Mar 2005 Location: uae Age: 35 Posts: 178 Member: 129149 Status: Offline Sonork: 100.1638990 Thanks Meter: 20	i8160p not repire boot show error next ? plz hepl me Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung I8160 V1.0.4705.16807] Connecting to the dead body...OK Detected dead body ID: 0xFFF00000 - IGNORED! Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x59): Communication is not established. Terminating. ؟؟؟

05-04-2013, 09:48	#9 (permalink)
bahsar333 Freak Poster Join Date: Mar 2005 Location: uae Age: 35 Posts: 178 Member: 129149 Status: Offline Sonork: 100.1638990 Thanks Meter: 20	my bro think for sharing i connect cable usb and install driver sam problem ? plz help what rj45

10-09-2013, 22:40	#10 (permalink)
luis_fzc Junior Member Join Date: Jun 2013 Posts: 2 Member: 1956038 Status: Offline Thanks Meter: 0	Works with i8160L?

11-16-2013, 00:09	#11 (permalink)
frankerebus Freak Poster Join Date: Aug 2006 Posts: 223 Member: 327489 Status: Offline Thanks Meter: 56	Can i use this DLL for repair an SGH-i577 from at&t ???

04-23-2014, 20:42	#12 (permalink)
elementor Junior Member Join Date: Apr 2010 Posts: 33 Member: 1283198 Status: Offline Thanks Meter: 1	I have a problem Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Samsung I8160 V1.0.4705.16807] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x51): Communication is not established. Terminating.

08-29-2014, 16:55	#13 (permalink)
amanvir No Life Poster Join Date: Feb 2006 Location: Monrovia Posts: 1,248 Member: 231737 Status: Offline Sonork: 100.1606447 Thanks Meter: 163	Can i use it with 8160L to repair dead boot?

06-20-2015, 18:01	#15 (permalink)
gilabatu Junior Member Join Date: Mar 2015 Location: INDONESIA Posts: 22 Member: 2364237 Status: Offline Thanks Meter: 2	please help me...i need bootfile for repair emmc samsung gt i8160...thanks