pls help me solve this problem
 

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung M180S V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.71V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x59): Communication is not established. Terminating.


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung M180S V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.74V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x59): Communication is not established. Terminating.

check your RTCK or resolder...

order divice can fine and repair done but i want to fix the emmc with riff box but alway this error