p1010 flash via p1000 nowdead boot - GSM-Forum

3glink · 06-12-2012, 20:59

try to Resurrect via riff but get some error,

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung P1010 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x0B6D602F - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

100% solder the pinout correctly
save and use magic card
change different speed settings
-----------------------
what else l miss...????

thanks in advance.

BABAK NURI · 06-13-2012, 11:07

Hi
Please use P1010_IRAM.dll

**legija** · 06-13-2012, 11:42

ERROR: Read/Write memory failed during H/W Init.

This error is caused by bad connection - either NRST or GND pins is not connected properly.

06-12-2012, 20:59	#1 (permalink)
3glink Major Poster Join Date: Nov 2007 Posts: 45 Member: 627496 Status: Offline Thanks Meter: 3	p1010 flash via p1000 nowdead boot try to Resurrect via riff but get some error, Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [Samsung P1010 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x0B6D602F - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...FAILED ERROR: Read/Write memory failed during H/W Init. 100% solder the pinout correctly save and use magic card change different speed settings ----------------------- what else l miss...???? thanks in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RIFF JTAG -Unbrick Samsung Galaxy S3, HTC 8x, HTC 8s World First ! ! !	legija	RIFFBOX	429	05-29-2013 10:02
Omes W9 Flash File Wanted (ANSWERED)	m_salunkhe2007	Chinaking Box	2	06-14-2012 05:58
coolsad flash file wanted (ANSWERED)	subiranamika	Chinaking Box	13	06-13-2012 12:01
Flash file needfor glx l668. (ANSWERED)	muruganandan	Chinaking Box	3	06-12-2012 13:17
Wing M99 Flash File Need (SOLVED)	.:TithiMobile:.	Chinaking Box	4	06-10-2012 13:06

06-13-2012, 11:07	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Please use P1010_IRAM.dll

06-13-2012, 11:42	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	ERROR: Read/Write memory failed during H/W Init. This error is caused by bad connection - either NRST or GND pins is not connected properly.