S5360 ressurection error - GSM-Forum

Deni's · 04-17-2014, 12:07

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S5360 V1.0.4443.1900]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 3.02V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000

Malik_GSM · 04-17-2014, 12:57

its emmc problm u need to repair with emmc jtag

Deni's · 04-18-2014, 02:08

Quote:

Originally Posted by Malik_GSM

its emmc problm u need to repair with emmc jtag

you sure EMMC problem???????

04-17-2014, 12:07	#1 (permalink)
Deni's No Life Poster Join Date: Aug 2012 Location: Bali-Indonesia Posts: 2,908 Member: 1800628 Status: Offline Thanks Meter: 941	S5360 ressurection error Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Samsung S5360 V1.0.4443.1900] Connecting to the dead body...OK Detected dead body ID: 0x07B3617F - CORRECT! Set I/O Voltage reads as 3.02V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Selected Resurrection Data for the NAND Chip with Page size = 4KB Flashing the dead body... ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000

04-17-2014, 12:57	#2 (permalink)
Malik_GSM No Life Poster Join Date: Mar 2013 Location: pakistan Age: 34 Posts: 842 Member: 1899191 Status: Offline Sonork: 100.1625109 Thanks Meter: 136	its emmc problm u need to repair with emmc jtag