s3850 boot repair ok but still hang
 

need help

S3850 boot repair with riff flash with multiloader / z3x

imei repair

but still hang on logo
phone was ok before dead


can you help me
how to erase full flash (with settings where to tick )
and how to write full dump

Hi
You can't Repair Your Phone Via Full Dump

Please Contact me via sonork

thanku you guys

problem solved


1. connect to jtag
2. erase full flash
3. resurrect
4. flash with multiloader
5. imei repair with z3x

now phone working and ok (but have no network problem)]


use this flash file other flash file not work (S3850XEKC5)

thanku you guys

problem solved


1. connect to jtag
2. erase full flash
3. resurrect
4. flash with multiloader
5. imei repair with z3x

now phone working and ok (but have no network problem)]


use this flash file other flash file will not work (S3850XEKC5)

----------------------------------------------
tx
i repear s3850 and it is hang on samsung
i flash whit S3850XEKC5 so can not imei repair with z3x
can you help me to change that
Please explain step by step because I tried everything
Messages that are still to be connected phones must be switched
When I turn the computer on and it stuck in the logo is not present...

try to erased first bro

i already mention each step there

please tell me where you stuck

flashing , erasing, resurrection or imei

I'd erased it and then flashing whit dump And resurrection Now, after writing S3850XEKC5 flash files on the phone the Samsung logo standing
Was told by a repair imei z3x is true and everything I tried was the correct imei

It took me 45 days to repair that set,

i also tried all possible points with riff , z3x but no luck, phone was dead by while unlocking so there no chance of harsware

connect to riff erase , resurrect , do not write dump file, now flash with z3x or multiload with S3850XEKC5 flash file (becuase you cannot do imei repair with another file)

if you got any error try again and again

(sometime i got error in Z3x msl no activated, sometime it show imei problem bit in last same above steps are giving life to my phone )

thank you my friend

following this procedure step by step all ok and samsung logo after resurrect is gone and phone is working good now.

thanks again

s3850 hang on logo & restart done....
 

share lang po mga boss....

unit:SAMSUNG S3850

prob: hang on logo & restart

eto procedure..
..put the phone in download mode by.
pressing vol.down+call+end call+power button
..opem multiloader 5.65.
see picture for details.

http://img831.imageshack.us/img831/1567/82076663.png

wait until its all done..
http://img692.imageshack.us/img692/1338/27875891.png

sana po mkatulong....

http://imageshack.us/a/img189/97/gdpitcom4835754148.gif


Hotfile.com: One click file hosting: S3850XEKC5.rar

MultiLoader V5.67.rar - 4shared.com - online file sharing and storage - download

http://imageshack.us/a/img33/3631/2mdo4mu.gif

Yes
erase , Resurrection & Flash & Solved , Which Is other Box Can not







Br;)
AzimBahar

how to erase flash samsung s3850?which tab menu can use it??thx

erase with rifff box brother