DCC Loader error, what is wrong?

[duniacell]

Connecting to the dead body...OK
Detected dead body ID: 0x122C80E1 - IGNORED!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0xFFFF/0xFFFF (16MB)

Writting FLASH1 memory from 0x00000000 to 0x00FFFFFF
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000

[legija]

Hi,
What are You trying to do ?

From log it can be seen that flash chip is not detected properly, hence nothing else would work.

[duniacell]

where can I download qsc1110.dll?

Is qsc1110 already support or not?

[duniacell]

Originally Posted by legija

Hi,
What are You trying to do ?

From log it can be seen that flash chip is not detected properly, hence nothing else would work.

I try to write. this phone use chipset qsc1110, how to flashing this phone?

[duniacell]

Too bad, RIFF not support Qualcomm qsc1110.

[legija]

Before making stupid statements, i'll ask You once again :

What are You trying to do ?

If You dont answer correctly this time, I'll ban You from riff section.

[duniacell]

Originally Posted by legija

Before making stupid statements, i'll ask You once again :

What are You trying to do ?

If You dont answer correctly this time, I'll ban You from riff section.

Upss sorry, if I make a stupid remark. I just want to repair dead boot Haier C710. after I saw the cpu was using qsc1110. I told you how to repair Qualcomm qsc1110?

I am a new Riff users, probably a lot to ask and learn.

[legija]

Originally Posted by duniacell

Upss sorry, if I make a stupid remark. I just want to repair dead boot Haier C710. after I saw the cpu was using qsc1110. I told you how to repair Qualcomm qsc1110?

I am a new Riff users, probably a lot to ask and learn.

Yes, lot to learn, first thing is to read sticky topic and support forum rules.

For start, select QUALCOMM NOR QSC1100 DLL, and post here full log from READ operation on DCC TAB.

[duniacell]

Originally Posted by legija

Yes, lot to learn, first thing is to read sticky topic and support forum rules.

For start, select QUALCOMM NOR QSC1100 DLL, and post here full log from READ operation on DCC TAB.

I have selected QUALCOMM QSC1100 but like this:

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
 
Detected an Initialized FLASH1 Chip ID: 0xFFFF/0xFFFF (16MB)
 
Writting FLASH1 memory from 0x00000000 to 0x00FFFFFF
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000

what should I do next?

I have 5 phones at all of the Dead Boot.

[legija]

You should do what I have told You in post above.
And please READ, then answer. DO NOT waste my time !

[duniacell]

Originally Posted by legija

You should do what I have told You in post above.
And please READ, then answer. DO NOT waste my time !

Flashing







Read Memory is completed.

[legija]

Ok,

Do You have same flash ID in all phones, or just this one ? From flash id, it is not recognized, either is dead or is differently connected to CPU data lines.

[duniacell]

Originally Posted by legija

Ok,

Do You have same flash ID in all phones, or just this one ? From flash id, it is not recognized, either is dead or is differently connected to CPU data lines.

No, just this one.

Haier C710 qsc1110.

[legija]

Ok, do this :

1. Switch to JTAG Read/Write TAB
2. Press "Connect&Get ID"
3. Press "Halt"
4. Enter "00000000" in Address field
5. Enter "00080000" in length field
6. Press "Read Memory"
7. Upload file to rapidshare or some other sharing site.

[duniacell]

this sir,
Haier c710 backup read memory.rar - 4shared.com - online file sharing and storage - download