Unbrick dead Samsung GT-i9250 Galaxy Nexus, GT-I9100G , GT-I9300 - GSM-Forum

**legija** · 04-25-2012, 18:36

For galaxy S3 GT-i9300, please carefully read this:

Euro/Asian models are based on 4 core Samsung Exynos 4412 CPU
JTAG access in all i9300 phones is DISABLED (password protected)and password is not available (yet).
Repair procedure for bricked phones is performed via SD card

This archive contains repair guide and files.

I'd like to ask all RIFF users to be patient, for some phones for now there is no tested solution (SD card download failed).
We are working on the problem and may come with solution at some point, but it is also possible that there will be no solution at all, besides replacing eMMC or programming it via external programmer.

Please DO NOT ask me anything about this model on Sonork or ICQ.
As with all other solutions, once we have it, we will release it.

If You wish to experiment and possibly You have device with unsecured MCU, You can use Exynos 4412 DLL for DCC operations (DCC TAB and eMMC Plugin).
Secured MCU will return 0x44 error code, and unsecured MCU will be accessible.

GT-I9250:
Just execute *.bat file from this package.
Installing drivers first would be pretty smart idea too.

Google
Enjoy !

Edit:

For i9100G phones which have ID 0xFFFFFFFE, download this archive, unpack and run *.bat file from root folder:

Thanks to R3IS

Google.

..::Thanh_gsm::.. · 04-25-2012, 18:39

Uida, You rule galaxy world

adnan_taeki · 04-25-2012, 18:41

Thaks brother ,,,

Regards,
Adnan Khaver

The_Killer · 04-25-2012, 18:46

what a great work
still #1 in repairing

B.R

SkyMobile05 · 04-25-2012, 18:46

Gooddddd thanks legija

lasfar · 04-25-2012, 19:17

20 characters

))) = nothing to say !

pitka · 04-25-2012, 19:40

First you need to remove battery and then load driver for OMAP (4460usb), then its working. Looks like TI recovery procedure.

But unfortunatelly it recovered bootloader (sbl) only, in my case eMMC pda image partition still damaged and eMMC need to be formatted completely.

Would it be possible to support this eMMC by JTAG too ?

Thanks

ikkks · 04-25-2012, 20:49

Gud Work ....... any plz test and report here .....

BesTCooL · 04-25-2012, 23:47

legija jtag master..

lihua · 04-26-2012, 00:19

link not work /????????//

BABAK NURI · 04-26-2012, 00:46

Quote:

Originally Posted by lihua

link not work /????????//

Hi
Link working good

BABAK NURI · 04-26-2012, 00:48

Quote:

Originally Posted by ikkks

Gud Work ....... any plz test and report here .....

Hi
Of Course tested before post by Mr.Legija

Also,Repaired 2set by me

it's simple and easy....after install driver run bat file ,after few second ,phone repair done..

antoniogonzalez · 04-26-2012, 04:23

Problem no enter recovery mode, manual restart

or Jtag resist 300K returns to the same image

IMG_0001.jpg

antoniogonzalez · 04-26-2012, 06:48

Enter menu recovery mode restart the Google logo and the padlock icon

the power button starts the phone up to the Google logo and the padlock icon.

I've tried pressing volume buttons to be able to use fastboot, as well as adb reboot to get into it into either recovery mode or bootloader - but neither works.

Is there any way of getting into download mode, fastboot, or recovery mode in this situation?

is loading files ???

boot boot.img
bootloader bootloader.img
recovery recovery.img

Computer Detect Android 1.1

THANKS

itsalllgood · 04-26-2012, 10:20

Thanls to start with.. My phone is hard bricked for the last 3 weeks..been looking for a Jtag box that supports nexus dead brick repair and no luck.Would this work for the 16GB GSM GT-I9250M

04-25-2012, 18:36	#1 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Unbrick dead Samsung GT-i9250 Galaxy Nexus, GT-I9100G , GT-I9300 For galaxy S3 GT-i9300, please carefully read this: Euro/Asian models are based on 4 core Samsung Exynos 4412 CPU JTAG access in all i9300 phones is DISABLED (password protected)and password is not available (yet). Repair procedure for bricked phones is performed via SD card This archive contains repair guide and files. I'd like to ask all RIFF users to be patient, for some phones for now there is no tested solution (SD card download failed). We are working on the problem and may come with solution at some point, but it is also possible that there will be no solution at all, besides replacing eMMC or programming it via external programmer. Please DO NOT ask me anything about this model on Sonork or ICQ. As with all other solutions, once we have it, we will release it. If You wish to experiment and possibly You have device with unsecured MCU, You can use Exynos 4412 DLL for DCC operations (DCC TAB and eMMC Plugin). Secured MCU will return 0x44 error code, and unsecured MCU will be accessible. GT-I9250: Just execute .bat file from this package. Installing drivers first would be pretty smart idea too. Google Enjoy ! Edit: For i9100G* phones which have ID 0xFFFFFFFE, download this archive, unpack and run .bat file from root folder: Thanks to R3IS Google. Last edited by legija; 05-02-2013 at 08:40.*

04-26-2012, 04:23	#13 (permalink)
antoniogonzalez No Life Poster Join Date: Aug 2005 Location: MOON Age: 43 Posts: 628 Member: 174173 Status: Offline Thanks Meter: 115	unbrick my I9250 Problem no enter recovery mode, manual restart or Jtag resist 300K returns to the same image IMG_0001.jpg

04-26-2012, 10:20	#15 (permalink)
itsalllgood Junior Member Join Date: Apr 2012 Posts: 19 Member: 1752435 Status: Offline Thanks Meter: 1	16gb gsm gt-i9250m Thanls to start with.. My phone is hard bricked for the last 3 weeks..been looking for a Jtag box that supports nexus dead brick repair and no luck.Would this work for the 16GB GSM GT-I9250M

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17
I am looking for information about GSM-CABLES.NE	DUPOND	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	08-03-1999 15:29
Selling original Nokia DAU9P cable	TheDon	Main Sales Section	0	07-21-1999 15:44
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

04-25-2012, 18:39	#2 (permalink)
..::Thanh_gsm::.. No Life Poster Join Date: Dec 2005 Location: Ha Noi - Viet Nam Age: 18 Posts: 1,289 Member: 207400 Status: Offline Sonork: 100.1582556 Thanks Meter: 262	Uida, You rule galaxy world

04-25-2012, 18:41	#3 (permalink)
adnan_taeki No Life Poster Join Date: Dec 2006 Location: Saudi Arabia Age: 45 Posts: 576 Member: 417778 Status: Offline Sonork: 100.1603326 Thanks Meter: 116	Thaks brother ,,, Regards, Adnan Khaver

04-25-2012, 18:46	#4 (permalink)
The_Killer Freak Poster Join Date: Oct 2007 Location: @GsmHosting.com Age: 39 Posts: 396 Member: 601608 Status: Offline Sonork: 100.1590021 Thanks Meter: 150	what a great work still #1 in repairing B.R

04-25-2012, 18:46	#5 (permalink)
SkyMobile05 No Life Poster Join Date: May 2007 Location: Algerie,Batna Posts: 786 Member: 508860 Status: Offline Sonork: 1613186 Thanks Meter: 224	Gooddddd thanks legija

04-25-2012, 19:17	#6 (permalink)
lasfar Freak Poster Join Date: Jul 2004 Location: casablanca Age: 57 Posts: 307 Member: 75223 Status: Offline Thanks Meter: 62	20 characters ))) = nothing to say !

04-25-2012, 19:40	#7 (permalink)
pitka Junior Member Join Date: Jun 2009 Posts: 34 Member: 1057960 Status: Offline Thanks Meter: 6	First you need to remove battery and then load driver for OMAP (4460usb), then its working. Looks like TI recovery procedure. But unfortunatelly it recovered bootloader (sbl) only, in my case eMMC pda image partition still damaged and eMMC need to be formatted completely. Would it be possible to support this eMMC by JTAG too ? Thanks

04-25-2012, 20:49	#8 (permalink)
ikkks No Life Poster Join Date: Oct 2007 Location: india Posts: 630 Member: 621455 Status: Offline Sonork: key4unlock Thanks Meter: 118	Gud Work ....... any plz test and report here .....

04-25-2012, 23:47	#9 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	legija jtag master..

04-26-2012, 00:19	#10 (permalink)
lihua No Life Poster Join Date: Nov 2006 Location: GOOD Posts: 1,235 Member: 388862 Status: Offline Thanks Meter: 107	link not work /????????//

04-26-2012, 06:48	#14 (permalink)
antoniogonzalez No Life Poster Join Date: Aug 2005 Location: MOON Age: 43 Posts: 628 Member: 174173 Status: Offline Thanks Meter: 115	Enter menu recovery mode restart the Google logo and the padlock icon the power button starts the phone up to the Google logo and the padlock icon. I've tried pressing volume buttons to be able to use fastboot, as well as adb reboot to get into it into either recovery mode or bootloader - but neither works. Is there any way of getting into download mode, fastboot, or recovery mode in this situation? is loading files ??? boot boot.img bootloader bootloader.img recovery recovery.img Computer Detect Android 1.1 THANKS