Unbrick dead Samsung GT-i9250 Galaxy Nexus, GT-I9100G , GT-I9300

[SEMEN]

Originally Posted by BABAK NURI

Hi
No Need Jtag-Interface For Repair Bricked I9300
---
Please Contact me via sonork....

hi can you write me on sosnork i have dead i9300 can you help me to repear?


i send you mes. on sosnork

Thanks !

[BABAK NURI]

Originally Posted by zhildzik

Hello, I have dead Samsung Galaxy Tab II GT-P5100, maybe someone can help me with resurrection it. I have only "OMAP4430" device in Windows when connected it and hold power button. Looks like can be repaired with omapflasher but no config/project file? Please, help.
Thank you.

Hi
I'm not sure about repair this model.
but we can try ...
please contact me via sonork

[citifone]

Originally Posted by legija

https://rapidshare.com/files/1168981...Flash_tuna.zip

GT-I9250:
Just execute *.bat file from this package.
Installing drivers first would be pretty smart idea too.


Enjoy !

Edit:

For i9100G phones which have ID 0xFFFFFFFE, download this archive, unpack and run *.bat file from root folder:

Thanks to R3IS
https://rapidshare.com/files/3960209...9_2ndlastt.rar

Great job..thank you so much..Works perfect and save a lot time and headache..thanks again for sharing

[SEMEN]

Hi i have samsung I9300 dead boot, i understand that riff not supported for repear dead boot ,

i try to repear with sd card metod, but all the time i see this error

SDCARD MODE

COPY BINARY FROM SDCARD

COPY BINARY TO EMMC

SDCARD DOWNLOAD FAILED


I Thinks only Riff Team can help me with this problem

Mr, Legia Need your help.

Thanks!!!

[universalunlocking]

samsung galaxy s2 i9100 dead while upgrade no power or going in boot mode need help

[kyaw8719]

i repair i9100g with riff jtag finish but not power on

i try repair omap4430hs_espresso_1200MHZ
show massage

?OMAPFlash v4.15 (Aug 12 2011)

?-v
?Entering parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ. txt at lin
e: 1
? -omap 4
? -t 36000
? -p OMAP4430_8G_HS
? -2
? chip_download EMMC Targets\Projects\espresso\MLO.hs
? chip_download EMMC Targets\Projects\espresso\Sbl.bin
? command cold_sw_reset
?Leaving parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ. txt
?@Targets\Projects\espresso\omap4430hs_1200MHZ.txt
?Looking for device (omap usb)
?Please turn off device
?Please turn on device
?Waiting for device (omap usb)
?Found device (omap usb)
?Requesting ASIC id
?AsicId items 05
?AsicId id 01 05 01 44 30 07 04
?AsicId secure_mode 13 02 01 00
?AsicId public_id 12 15 01 B6 94 C0 2E 7B A2 88 CE 81 0D 5C A0 47 6C B7
0D E7 AB C5 6D
?AsicId root_key_hash 14 21 01 49 D3 8A 83 CA 2D EF 29 0B DF 4E 54 67 2D 6F
EA 08 9C 39 8F 6F 86 A3 4D D3 0C 74 77 B7 A4 54 1D
?AsicId checksum 15 09 01 9C 66 9A D9 68 2A DC CF
?Searching 2nd for: OMAP4430_8G_HS 443007 04 HS
?Loading second file Targets\2nd-Downloaders\dnld_startup_omap4_hs_4g_es2.s2.sig
ned.2nd.hs
?Entering parameter filemapflash2nd.txt at line: 45
? -pheriphalboot_reopen
?Reading board configuration file Targets\Configurations\configuration_omap4430_
8g.txt
?Reading definition file .\targets\definitions\definitions_omap4.txt
? -board_config Targets\Configurations\configuration_omap4430_8g.t xt
?Leaving parameter filemapflash2nd.txt
?Sending size of second file (0x00006E60 bytes)
?Transferring second file to target (0x6E60 bytes)
?Closing boot connection

please what problem?
customer said his playing game power dead

[faisalyasin]

Hi Guys,

Looking for help, found this helpful thread in google. Had same issue with Nexus GSM 16GB (Maguro) Installed the USB driver with valuable info here, now when im running the batch file im getting following error. please help.



------------------------------------------------

» OMAPFlash v4.15 (Aug 12 2011)

» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.tx t at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.tx t
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 3E EB AF AD 22 F0 B9 F7 9F 3F 95 CD 97 10 F4
25 DF 9B B6 73
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter filemapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna _8g.txt
» Leaving parameter filemapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Operation FAILED (Remote: : Unknown command d)
» Elapsed time: 0:12.844
Press any key to continue . . .

[akome]

Hi, I have I9300 dead, it doesn't turn on at all, completely bricked, it doesn't enter recovery... Any one has the pinout and resurrector?

[legija]

Search for "GT-I9300_JTAGarabic.zip" on google.

[BABAK NURI]

Originally Posted by umarch10

samsung galaxy s2 i9100 dead while upgrade no power or going in boot mode need help

Hi
if you have a i9100,,You can repair via jtag-Interface by Riff-Box
But,if you have a I9100G...You need read first post

[akome]

Thanks legija I will search for it.

[mlnteam]

hi team
i have one i9300 phone useing custom rom china 4.04
and im wrong flash i9003 to phone now phone brick and can come to download mode
i try flash i9300 original file it say error when flash radio
i try to flash GT-I9300_JTAGarabic also fail
need team help how to do next step ! becouse on riff not have i9300 slection
please help

[groove-max]

Originally Posted by mlnteam

i try flash i9300 original file it say error when flash radio

I had similar trouble some days ago. I tried to flash eupean i9300 with chinese firmware and got error while flashing modem. I think the problem with some differences in modems. But then this phone was successfully flashed with Taiwan firmware.
So, firstly, try to flash firmware with original region.

[MUTUAL]

Hi i m getting this error on i9250 what will be the problem?

» OMAPFlash v4.15 (Aug 12 2011)

» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
»     -omap 4
»     -t 36000
»     -p OMAP4460_TUNA_8G_HS_PRO
»     -2
»     chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
»     chip_download EMMC Targets\Projects\tuna\sbl.img
»     command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id             01 05  01  44 40 07 01
» AsicId secure_mode    13 02  01  00
» AsicId public_id      12 15  01  69 92 6B B3 5C B7 10 B9 F5 CB E9 84 9E 64 96
B5 8D 3E CC 7F
» AsicId root_key_hash  14 21  01  67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum       15 09  01  22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter file:omapflash2nd.txt at line: 46
»     -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
»     -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file:omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::....... [32768]
» Download failed (data transmission error): Data transfer failure (code -1, No
error)
» Elapsed time: 0:00.578 (81591 bytes/s)
» Operation FAILED (Data transfer failure (code -1, No error))
» Elapsed time: 2:44.469
Press any key to continue . . .

C:\Documents and Settings\Owner\Desktop\OMAPFlash>GOTO __loop

» OMAPFlash v4.15 (Aug 12 2011)

» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
»     -omap 4
»     -t 36000
»     -p OMAP4460_TUNA_8G_HS_PRO
»     -2
»     chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
»     chip_download EMMC Targets\Projects\tuna\sbl.img
»     command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn off device

[khurram450]

sir plz update this model SAMSUNG GALAXY S3.I9300...PLZ sir this update....i have 4 pcs in that dead boot.