7230 rm 604, RESTARTS
 

I HAVE 7230. IT IS RESTARTNG. I HAVE FLASHED IT LATEST VERSION BUT SET IS STILL RESTARTING. HERE IS LOG BELOW.


card found: S/N .....................
registered to: prime_master786
Connect phone on selected interface...
Core version : 1.24.2 , Rev : 2.1
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm598__10.82.mcusw
PPM : rm598__10.82.ppm_oc
CNT : rm604__10.82_011.image_c_orange_ch_v3_96586
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 28D00108D90700495C7697895EDFF8F60F02F96C
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 11.24.0
Processing RAWLOADER...
FLIC : 00300098
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 11.24.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353377045858896
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\353377045858896_CR T_2nd.rpl
===Flashing [MCU]===
Erase : Processing rm598__10.82.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm598__10.82.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 135 blocks
TIME : Write time : 00:00:36
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM]===
Erase : Processing rm598__10.82.ppm_oc
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm598__10.82.ppm_oc
Total writen 24 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm604__10.82_011.image_c_orange_ch_v3_96586
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm604__10.82_011.image_c_orange_ch_v3_96586
Total writen 44 blocks
TIME : Write time : 00:00:13
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:01:02
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 7230
Software Info: V 10.82 08-06-11 RM-604 (c) Nokia
IMEI: 353377045858896
PPM version : V 10.82 08-06-11 RM-598 (c) Nokia OC
Product code: 0590654
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 35 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Done!
Elapsed: 00:01:36
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok


PLZ GUIDE ME HOW CAN I REPAIR THIS PHONE?????????

Hello.
Mostly it is HW problem.

can anyone tell what is the solution of this problem ?
if hardware what to check ?