Nokia 2.3 ta-1206 reset settings failed - GSM-Forum

samwaiyne · 05-05-2020, 11:51

Card found : C*16A*** , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20

Operation : Identify [FTM] [ v1.20 ]

-> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable
-> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear

Wait for phone...
Connect Ok!
Device Found!
Initialize ...

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

what might be the problem ??

Abzal · 05-14-2020, 04:50

Same problem
But when i try check it with
fastboot devices comand - nothing
May be problem with driver?

Abzal · 05-14-2020, 06:02

Try on another PC with good driver
Same problem

Svito · 05-25-2020, 14:56

Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20

Operation : Identify [FTM] [ v1.20 ]

-> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable
-> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear

Wait for phone...
Connect Ok!
Device Found!
Initialize ...

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

crissth · 05-28-2020, 19:46

brother tries to pass the firmware that is on the support, if he removes the code and tests

imran999 · 06-10-2021, 07:04

Nokia 2.3 TA 1206 Hard Reset .FRP 1Clik Umt

05-05-2020, 11:51	#1 (permalink)
samwaiyne Insane Poster Join Date: Aug 2011 Location: +254... Posts: 69 Member: 1644733 Status: Offline Thanks Meter: 33	Nokia 2.3 ta-1206 reset settings failed Card found : C16A** , v0122 Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20 Operation : Identify [FTM] [ v1.20 ] -> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable -> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear Wait for phone... Connect Ok! Device Found! Initialize ... Error : Fail to init protocol! Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable! what might be the problem ??

05-14-2020, 04:50	#2 (permalink)
Abzal No Life Poster Join Date: Dec 2002 Location: Kazakhstan Posts: 1,043 Member: 19032 Status: Offline Thanks Meter: 158	Same problem But when i try check it with fastboot devices comand - nothing May be problem with driver?

05-14-2020, 06:02	#3 (permalink)
Abzal No Life Poster Join Date: Dec 2002 Location: Kazakhstan Posts: 1,043 Member: 19032 Status: Offline Thanks Meter: 158	Try on another PC with good driver Same problem

05-25-2020, 14:56	#4 (permalink)
Svito Freak Poster Join Date: May 2004 Location: Slovakia Age: 45 Posts: 327 Member: 66497 Status: Offline Thanks Meter: 81	Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20 Operation : Identify [FTM] [ v1.20 ] -> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable -> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear Wait for phone... Connect Ok! Device Found! Initialize ... Error : Fail to init protocol! Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable!

05-28-2020, 19:46	#5 (permalink)
crissth Junior Member Join Date: Feb 2018 Posts: 22 Member: 2808892 Status: Offline Thanks Meter: 0	brother tries to pass the firmware that is on the support, if he removes the code and tests

06-10-2021, 07:04	#6 (permalink)
imran999 Major Poster Join Date: Dec 2012 Posts: 49 Member: 1855233 Status: Offline Thanks Meter: 9	Nokia 2.3 TA 1206 Hard Reset .FRP 1Clik Umt