5130 second boot error-rap ic? - GSM-Forum

zone3 · 10-30-2012, 04:59

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_qa
CNT : rm495__07.97.image_qa_blu
FlashFile verify disabled
-> SWversion check skipped : Dead mode selected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1DF00002A7DD7D565FB73B641FA5C37A56A08E54
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
Error : 2nd boot not accepted
RX : D372C007011500000000

not cable problem-tried 3 cables.usb flashing error as below

Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID: 000000010000022600010006030C192101033000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 1DF00002A7DD7D565FB73B641FA5C37A56A08E54
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
-> Error while send data to phone!
Check battery, connection. Try again
Connect phone on selected interface...

-> Error while flashing...

i think it rap ic problem-am i right?

Qaisar Mahmood · 10-30-2012, 19:18

Check battery then Try again if Same then Check Hardware

BR
Qaisar Mahmood

Dzirt · 10-31-2012, 05:18

Flash ic.
Resolder, for start. If not luck - check power also, if all voltages ok - need change it.

10-30-2012, 04:59	#1 (permalink)
zone3 No Life Poster Join Date: Jan 2009 Posts: 3,260 Member: 946381 Status: Offline Thanks Meter: 150	5130 second boot error-rap ic? Selected FlashSettings : Manual Files Set for Flashing : MCU : rm495__07.97.mcusw PPM : rm495__07.97.ppm_qa CNT : rm495__07.97.image_qa_blu FlashFile verify disabled -> SWversion check skipped : Dead mode selected Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000010000022600010006030C192101033000 CMT EM0 ID : 00000296 CMT EM1 ID : 00000B22 CMT PUB ID : 1DF00002A7DD7D565FB73B641FA5C37A56A08E54 CMT MODE ID : 00 CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723 CMT ROM ID : 273F6D55DFAAF68F CMT : Sending 2nd loader... Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0 Error : 2nd boot not accepted RX : D372C007011500000000 not cable problem-tried 3 cables.usb flashing error as below Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. ASIC ID: 000000010000022600010006030C192101033000 CPU ID : RAP3Gv3 , Features : No any extended features RAP_PUB: 1DF00002A7DD7D565FB73B641FA5C37A56A08E54 CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... -> Error while send data to phone! Check battery, connection. Try again Connect phone on selected interface... -> Error while flashing... i think it rap ic problem-am i right?

10-30-2012, 19:18	#2 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,934	Check battery then Try again if Same then Check Hardware BR Qaisar Mahmood

10-31-2012, 05:18	#3 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Flash ic. Resolder, for start. If not luck - check power also, if all voltages ok - need change it.