lumia 540 dead after flash with best bb5
 

Connect phone on selected interface...

Core : v2.25 , WP10x FlashEngine : v2.5

FFU : RM1141_02074.10000.15342.27003_RETAIL_prod_signed_ 1000_02AF77_000-IN.ffu
Checking FFU file, wait...
FFU Revision ID : 2.0
FFU Model ID : Nokia.MSM8212.P6247
FFU RootKeyHash : 0000000000000000000000000000000000000000
FFU Languages : Portuguese(Brazil) , Russian , Greek , fr-ca , Indonesian , Korean , Polish , bn-bd , Uzbekistan(Latin) , Catalan , Swedish , Bulgarian , Japanese , Spanish , English (UK) , Czech , Latvian , Slovak , Chinese , sr-latn-rs , Vietnamese , af-za , Hindi (India) , gl-es , Turkish , Thai , Italian , Danish (Denmark) , ha-latn-ng , Slovenian , Malay (Malaysia) , Lithuanian , Persian (Iran) , Kazakh , Romanian , English , eu-es , Estonian , Filipino (Philippines) , Belorusian , Norwegian (Bokmal , Norway) , Finnish , lo-la , km-kh , Arabic , Ukrainian , Croatian , Portuguese(Portugal) , Chinese(Taiwan) , Macedonian , Hungarian , Spanish(Mexico) , Azerbaijan(Latin) , German , Albanian , Dutch (Netherlands) , French , sw-ke , Hwbre (Israel) ,
FFU ChipSectors : 15155200
FFU Header : 0x000E0000
FFU Payload : 0x69FE0000
FFU FastVerify : Ok

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Boot Mode confirmed!
Setting Preloder
Collect Info...
Setting Application
Setting Secure
Collect Info...
=== Nokia Flash App info :
Protocol Version : 2.37
Protocol Implementation : 2.60
=== Phone Initial info :
Phone RMxxx ID : RM-1141
Phone Model ID : Nokia.MSM8212.P6247.1.1
Phone Model PC : 059X1Z0
Phone IMEI : 351847077328663
=== eMMC info :
eMMC Vendor : Hynix
eMMC CID : 0090
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey : 86ACB97612E34C682490412CE98BAAD27779008E
=== Other info :
SD present : False

Full Check skipped , will be checked by ImageSignature


Battery Level : 79%
RPMB Provision Status Code : 0x0101
Device RAM size : 1024 MiB
Device have ATRP (AntiTheft) system!
Backup to RAM Ok!

FFU : RM1141_02074.10000.15342.27003_RETAIL_prod_signed_ 1000_02AF77_000-IN.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted :)
Perform Data Partition Erase
Erase done
Sending FFU Payload Data...
Error, stop at : 0x0004 , reason : NO ACK !!!
Connection broken due some HW reasons ( like empty battery or cable ) or drivers problem!
Red Light :(
Error during flashing!
[Info] : Check previous message carefully , follow given advises
[Info] : Recommended to not power off device, if it shows "RED SCREEN"
[Info] : After problems will be fixed - tick "Recovery" and repeat flashing again!

suddenly set goes off and after that still dead
befor flash set is working perfectly little bit hang


plz guide

pls check battery...full charge the battery and try

if not help then pls check the board

best will not kill 98% phone as on my experience.

Thanks.

Little bit hang - yes, perfect.
MS not released repair package for that phone, unfortunately. Only via external device.

i have charged batt full
na d before flash batery was 79% charged and now set is completely dead
system detect qualcom port and even in best there is no rpf file for rm1141
and no way on best to recover according my knowledge if there is way plz suggest