E5-00 RM-632 strange problem - GSM-Forum

Dilip_Nath · 06-28-2012, 10:36

The problem was before flashing
Nokia then off

I flash the phone.

Flashing Log

Code:

card found: S/N 
registered to: Dilip_Nath

Connect phone on selected interface...

Core : v1.47 , FlashEngine : v1.5

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm632_091.001_prd.core.fpsx
PPM : rm632_091.001_47.01_India_prd.rofs2.fpsx
PPM2 : rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_091.001_U005.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     10300012C4A403443B41AD9E37A1BC60D324F741
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: phone is in flash mode
   ===Flashing [MCU]===
Erase : Processing rm632_091.001_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm632_091.001_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 436 blocks
TIME : Write time : 00:00:41 
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm632_091.001_47.01_India_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm632_091.001_47.01_India_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 182 blocks
TIME : Write time : 00:00:20 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM2]===
Erase : Processing rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 35 blocks
TIME : Write time : 00:00:03 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm632_091.001_U005.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm632_091.001_U005.000_prd.uda.fpsx
Total writen 97 blocks
TIME : Write time : 00:00:11 
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:20
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia E5-00
Software Info:     V ICPR82_11w16.3.10 13-03-12 RM-632 (c) Nokia
IMEI:  354859041095630
Ape Version: 091.001
Product code:  059H8N4
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:03:09
Connect phone on selected interface...

After flashing no power, vibrate only.

Any suggestion.

wbr
Dilip

ali5noor · 06-28-2012, 11:55

flash it with the latest software file

Br

Mohsin-* · 06-28-2012, 12:08

Hello

Post here Self TEST logs ,as i able see phone is in Local mode

Dilip_Nath · 06-28-2012, 14:36

Quote:

Originally Posted by Mohsin-*

Hello

Post here Self TEST logs ,as i able see phone is in Local mode

Self Test Log

Code:

Initializing Tests...
IMEI : 354859041095630 , Phone : RM-632 Nokia E5-00
Get keys...
PASSED | ST_SLEEP_X_LOOP_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
PASSED | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
PASSED | ST_KELVIN_MISC_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_KELVIN_XEAR_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_USB_CHARGING_TEST
PASSED | ST_IIC_TEST
PASSED | ST_DIGIMIC_TEST
->ERROR | ST_RAM_IF_TEST
PASSED | ST_LED_CONTROLLER_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
PASSED | ST_CDSP_RF_BB_IF_TEST
PASSED | ST_CDSP_RF_SUPPLY_TEST
PASSED | ST_CDSP_TX_IQ_TEST
PASSED | ST_CDSP_TXC_DATA_TEST
PASSED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_WCDMA_TX_POWER_TEST
NOT RUN | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_LED_FLASH_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_MAIN_LCD_IF_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_WLAN_TEST
PASSED | ST_BT_WLAN_COEXISTENCE_TEST
NOT RUN | ST_USB_LOOP_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_LED_FLASH_IF_TEST
SelfTests end

Plz identify my fault.

wbr
Dilip

**...:::::NP™:::::...** · 06-28-2012, 14:40

@ Dear Mohsin

He Told Me ( Dlip_Nath) Here Set When it With UFS+Best Set Gone Local Mode & Test Also Showing info But Normal Mode Not Work.

Need Best & Working Suggestion.

Dilip_Nath · 06-28-2012, 14:42

Quote:

Originally Posted by ali5noor

flash it with the latest software file

Br

Brother its latest firmware and I also flash it with matching product code.

Dzirt · 06-29-2012, 03:58

Hello.
RAM_IF test show fault, seems it was water damaged.
Did you open phone?

Dilip_Nath · 07-01-2012, 05:14

Thanks everybody for response.

My problem solved by hardware.

Just Remove camera then everything works fine.

wbr
Dilip

chris_ua · 09-19-2012, 14:32

Quote:

Originally Posted by Dilip_Nath

Thanks everybody for response.

My problem solved by hardware.

Just Remove camera then everything works fine.

wbr
Dilip

Helped me alot.
Thanks.

Qaisar Mahmood · 09-19-2012, 14:56

@Dilip_Nath

I am happy to See Ur Problem Solved

BR
Qaisar Mahmood

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-16-2013 08:16
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
6110 5.47 sw unlock problem	gsms	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-21-1999 19:43
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

06-28-2012, 11:55	#2 (permalink)
ali5noor Freak Poster Join Date: Jan 2011 Location: World Posts: 398 Member: 1503321 Status: Offline Thanks Meter: 37	flash it with the latest software file Br

06-28-2012, 12:08	#3 (permalink)
Mohsin-* No Life Poster Join Date: Dec 2006 Location: Pakistan/UAE/WorldWide Posts: 8,288 Member: 417298 Status: Offline Sonork: 100.1578269 Thanks Meter: 18,268	Hello Post here Self TEST logs ,as i able see phone is in Local mode

06-28-2012, 14:40	#5 (permalink)
...:::::NP™:::::... Moderator Join Date: Nov 2009 Location: €urope Age: 41 Posts: 11,043 Member: 1162626 Status: Offline Sonork: 100.1591727 QQ:2337938173 Thanks Meter: 11,110	@ Dear Mohsin He Told Me ( Dlip_Nath) Here Set When it With UFS+Best Set Gone Local Mode & Test Also Showing info But Normal Mode Not Work. Need Best & Working Suggestion.

06-29-2012, 03:58	#7 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Hello. RAM_IF test show fault, seems it was water damaged. Did you open phone?

07-01-2012, 05:14	#8 (permalink)
Dilip_Nath No Life Poster Join Date: Nov 2006 Location: Bangladesh Posts: 1,377 Member: 387110 Status: Offline Sonork: Not Use Thanks Meter: 630	Thanks everybody for response. My problem solved by hardware. Just Remove camera then everything works fine. wbr Dilip

09-19-2012, 14:56	#10 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,934	@Dilip_Nath I am happy to See Ur Problem Solved BR Qaisar Mahmood