Nokia 225 DS RM-1011 flash problem
 

Card found: S/N : .... , v0122
Registered to: ......

Connect phone on selected interface...

Core : v2.13 , MTKx FlashEngine : v9.0

Verify files ...
MAUI : RM-1011_ROM_eMP_30.06.11
VIVA : RM-1011_VIVA_eMP_30.06.11
LANG : RM-1011_LANG_PACK_ROM_ME_eMP_30.06.11_001
CUST : RM-1011_CUSTPACK_ROM_ME_APAC_ID_eMP_30.06.11_001
JMPT : RM-1011_JUMP_TABLE_ME_APAC_ID_eMP_30.06.11_001
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 78 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 277480F27BCDEB579FA65278C7E6407C
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL failed! (Bad ACK)
BootLoader Init Failed (HW/Connection Error)
Connect phone on selected interface...

Boot Error
Flashing failed!
Connect phone on selected interface...




help...infinity team :(

BAD ACK error mean some problems with connection. Close ALL sw, which can use , slow down ports and etc.