Nokia 5310 (2020) Test - Page 2 - GSM-Forum

renren · 07-24-2021, 12:46

Is there news from this update?

InfinityHelp · 07-24-2021, 14:38

So many things should be implemented and rebuilded.
As soon as final well tested version will be released team will send an e-mail with news to all users.

some_info2010 · 09-09-2021, 10:13

need flash file ta1212

some_info2010 · 09-18-2021, 12:01

KEYTAK60A_M530_PCB01_gprs_MT6260_S00.M530_YFSPYX_2 10529_V01.bin

Abir24 · 10-31-2021, 14:48

Quote:

Originally Posted by jaydi

Code:

operation : Identify [ v1.21 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert usb cable in phone
waiting for device connection ...

Ptfn : Care suite usb serial port (com22)
mode : Nokia usb serial
port : 22
brom : Init brom
brom init passed!
     Chip : Mt6260 , sbid : 0xcb00 , hwvr : 0x8000 , swvr : 0x0000
brom : Seccfg : 0x00000005
brom : Nokia usb serial
brom : 0x05 bl : 0x00
brom : Meid : 07xxxxxxxxxxxxxxxxxxxxxxxx
brom : Run bootloader ... 
Boot : Run bl ver. 01
boot : 0x05 bl : 0x01
boot : Wd : 0005
boot : Rtc : Setup ... 
Boot : Rtc : 000e
boot : Prj : Pisces.10.01.11.p1
boot : Swr : 10.01.11
boot : Bdds : 30
boot : Psrm : Init
boot : Psrm : 0003

boot done!

Swver : Pisces.10.01.11.p1
flash : 00ef : 0060 : 0018 : 0000
prdc : 059z0x8
imei[1] : 35xxxxxxxxxxx
imei[2] : 35xxxxxxxxxxx
nck  : 20 digits
prov : 24407000

saved as  : 35xxxxxxxxxxxx.mtsec
saved to  : C:\infinity-box\best2\backup\


done!
Elapsed: 00:00:24

 reconnect power/cable!

Code:

 
operation : Read firmware [ v1.21 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert usb cable in phone
waiting for device connection ...

Ptfn : Care suite usb serial port (com22)
mode : Nokia usb serial
port : 22
brom : Init brom
brom init passed!
     Chip : Mt6260 , sbid : 0xcb00 , hwvr : 0x8000 , swvr : 0x0000
brom : Seccfg : 0x00000005
brom : Nokia usb serial
brom : 0x05 bl : 0x00
brom : Meid : 07xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
brom : Run bootloader ... 
Boot : Run bl ver. 01
boot : 0x05 bl : 0x01
boot : Wd : 0005
boot : Rtc : Setup ... 
Boot : Rtc : 000e
boot : Prj : Pisces.10.01.11.p1
boot : Swr : 10.01.11
boot : Bdds : 30
boot : Psrm : Init
boot : Psrm : 0003

boot done!

Swver : Pisces.10.01.11.p1
flash : 00ef : 0060 : 0018 : 0000
code  : 0x00c40000
reading flash ... 
Tdsn : Ta-1212
prdc : 059z0x8
ppm  : Ei
lang : 
[1] : Georgian (georgia)
[2] : Armenian (armenia)
[3] : Romanian (romania)
[4] : Ukrainian (ukraine)
[5] : Belarusian (belarus)
[6] : Uzbek (uzbekistan)
[7] : Russian (russia)
[8] : Kazakh (kazakhstan)
[9] : Azeri (azerbaijan)
[10] : English (united kingdom)

build : Ta-1212_rom_emp_10.01.11
build : Ta-1212_lang_pack_rom_ei_emp_10.01.11_001
build : Ta-1212_custpack_rom_ei_emp_10.01.11_001
build : Ta-1212_jump_table_ei_emp_10.01.11_001
build : Ta-1212_viva_emp_10.01.11

make vpl definition

save path : C:\nokia\fp\ta-1212\
save name : Ta-1212_059z0x8_10.01.11.vpl

build finished!

Done!
Elapsed: 00:06:00

Code:

open vplfile : Ta-1212_059z0x8_10.01.11.vpl
description  : Ta-1212 ei
devicetype   : Ta-1212
productcode  : 059z0x8
softwarever  : 10.01.11
load ok!

operation : Write firmware [ v1.21 ]
setting   : Userdata erase : True
setting   : Langpack only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert usb cable in phone
waiting for device connection ...

Ptfn : Care suite usb serial port (com22)
mode : Nokia usb serial
port : 22
brom : Init brom
brom init passed!
     Chip : Mt6260 , sbid : 0xcb00 , hwvr : 0x8000 , swvr : 0x0000
brom : Seccfg : 0x00000005
brom : Nokia usb serial
brom : 0x05 bl : 0x00
brom : Meid : 07xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
brom : Run bootloader ... 
Boot : Run bl ver. 01
boot : 0x05 bl : 0x01
boot : Wd : 0005
boot : Rtc : Setup ... 
Boot : Rtc : 000e
boot : Prj : Pisces.10.01.11.p1
boot : Swr : 10.01.11
agent : Look for suitable bootchain in da ... 
Agent : Default auto
agent : Found mt6260
agent : Pisces.10.01.11.p1
     boot : Sending 1st da ...
Boot : Da sent
boot : Transfer control to da ... 
Da : Sync passed!
Da : Authentification pass!
Da : Agent : V03.02 on bbid : 0x8b

        nor: 00c8 : 0060 : 0018 : 0000
        nor: [gigadevice] gd25lq128
        nor: 
              Tsize  : 0x01000000 [ 16,00 mb ]
              psize  : 0x01000000 [ 16,00 mb ]
              stype  : 0x00000000
              flotp  : Da_nor_otp_not_support

 status : Ok
 bstyle : Sf_flash_boot

boot done!

Vpl softwareversion   : 10.01.11 [ta-1212]
dev softwareversion   : 10.01.11
swinfo compare result : Same

load flashset : 
Mrom : Ta-1212_rom_emp_10.01.11
lang : Ta-1212_lang_pack_rom_ei_emp_10.01.11_001
cust : Ta-1212_custpack_rom_ei_emp_10.01.11_001
jump : Ta-1212_jump_table_ei_emp_10.01.11_001
viva : Ta-1212_viva_emp_10.01.11

prepare flashset : 
Dcr : Ta-1212_rom_emp_10.01.11
dcr : Ta-1212_lang_pack_rom_ei_emp_10.01.11_001
dcr : Ta-1212_custpack_rom_ei_emp_10.01.11_001
dcr : Ta-1212_jump_table_ei_emp_10.01.11_001
dcr : Ta-1212_viva_emp_10.01.11

prepare target 
sds : Ok : 0x00ff4000 : 0x0000c000
ffs format ok!

Erase target flash 
erase done!

Write target flash
write : Ta-1212_rom_emp_10.01.11
write : Ta-1212_lang_pack_rom_ei_emp_10.01.11_001
write : Ta-1212_custpack_rom_ei_emp_10.01.11_001
write : Ta-1212_jump_table_ei_emp_10.01.11_001
write : Ta-1212_viva_emp_10.01.11
write done, waiting target response ... 
Write flash done!

Verify target flashcontent
verify : Ta-1212_rom_emp_10.01.11
verify : Ta-1212_lang_pack_rom_ei_emp_10.01.11_001
verify : Ta-1212_custpack_rom_ei_emp_10.01.11_001
verify : Ta-1212_jump_table_ei_emp_10.01.11_001
verify : Ta-1212_viva_emp_10.01.11

done!
Elapsed: 00:02:36

 reconnect power/cable!

Code:

 operation : Reset settings [ v1.21 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert usb cable in phone
waiting for device connection ...

Ptfn : Care suite usb serial port (com22)
mode : Nokia usb serial
port : 22
brom : Init brom
brom init passed!
     Chip : Mt6260 , sbid : 0xcb00 , hwvr : 0x8000 , swvr : 0x0000
brom : Seccfg : 0x00000005
brom : Nokia usb serial
brom : 0x05 bl : 0x00
brom : Meid : 07xxxxxxxxxxxxxxxx
brom : Run bootloader ... 
Boot : Run bl ver. 01
boot : 0x05 bl : 0x01
boot : Wd : 0005
boot : Rtc : Setup ... 
Boot : Rtc : 000e
boot : Prj : Pisces.10.01.11.p1
boot : Swr : 10.01.11
agent : Look for suitable bootchain in da ... 
Agent : Default auto
agent : Found mt6260
agent : Pisces.10.01.11.p1
     boot : Sending 1st da ...
Boot : Da sent
boot : Transfer control to da ... 
Da : Sync passed!
Da : Authentification pass!
Da : Agent : V03.02 on bbid : 0x8b

        nor: 00c8 : 0060 : 0018 : 0000
        nor: [gigadevice] gd25lq128
        nor: 
              Tsize  : 0x01000000 [ 16,00 mb ]
              psize  : 0x01000000 [ 16,00 mb ]
              stype  : 0x00000000
              flotp  : Da_nor_otp_not_support

 status : Ok
 bstyle : Sf_flash_boot

boot done!

Ffs info exists in maui : 0x00c40000  :  0x003b4000
ffs format ... 
Ffs format ok!

Done!
 Elapsed: 00:00:28

we all need this update.........
Plz update soon.....

babarmughal · 12-23-2021, 17:03

Hello dear team... why not releasing this ???
or BEST project is end ??

Infinity-BEST · 12-27-2021, 11:09

At the moment [BEST] is under deep rebuilding, new version should comes in some time.

alamgir80 · 12-29-2021, 14:33

Phone model Nokia TA-1212

Code:

Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM10)
MODE : NOKIA USB SERIAL
PORT : 10
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : A33B5B18E1BC620FA4B6019C4DD0966E
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : PISCES.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : PISCES.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
PRDC : 059Z0X8
IMEI[1] : 357775101061006
IMEI[2] : 357775101561005
NCK  : 20 digits
PROV : 24407000

Saved as  : 357775101061006.mtsec
Saved to  : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:00:33

Reconnect Power/Cable!

alamgir80 · 03-01-2022, 06:59

Please realese new update for this model.

Code:

Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM22)
MODE : NOKIA USB SERIAL
PORT : 22
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : A33B5B18E1BC620FA4B6019C4DD0966E
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : PISCES.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : PISCES.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
PRDC : 059Z0X8
IMEI[1] : 357775101061006
IMEI[2] : 357775101561005
NCK  : 20 digits
PROV : 24407000

Saved as  : 357775101061006.mtsec
Saved to  : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:00:40

Reconnect Power/Cable!

Vlado-sv · 08-04-2022, 12:49

Hello, please help, I need the file for the firmware Nokia 5310 Ta-1212 with the Ukrainian language.

Vlado-sv · 08-04-2022, 13:14

Hello, please help, I need the file for the firmware Nokia 5310 Ta-1212 with the Ukrainian language. I also have one downloaded from my phone with Polish, English and Deutsch

ali-f16 · 08-05-2022, 06:46

Hello dear team... why not releasing this ???
or BEST project is end ??

ali-f16 · 08-30-2022, 07:27

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM15)
MODE : NOKIA USB SERIAL
PORT : 15
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 12F77E474364976B5EDEF8373C0EABC8
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : PISCES.11.02.11.p1
BOOT : SWR : 11.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : Device AutoID failed!

Error : Fail to init protocol!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM15)
MODE : NOKIA USB SERIAL
PORT : 15
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 12F77E474364976B5EDEF8373C0EABC8
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : PISCES.11.02.11.p1
BOOT : SWR : 11.02.11
AGENT : Look for suitable BootChain in DA ...
AGENT : Device AutoID failed!

Error : Fail to init protocol!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

YellowBoss · 08-30-2022, 09:05

Quote:

Originally Posted by ali-f16

Hello dear team... why not releasing this ???
or BEST project is end ??

Hello,

As soon as updated software will be ready I will post news here https://infinity-best.com/news/

ali-f16 · 08-30-2022, 12:29

Hello

What day and date will it be published?

07-24-2021, 12:46	#16 (permalink)
renren Freak Poster Join Date: Dec 2005 Location: UA Posts: 110 Member: 209146 Status: Offline Thanks Meter: 34	Is there news from this update?

07-24-2021, 14:38	#17 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	So many things should be implemented and rebuilded. As soon as final well tested version will be released team will send an e-mail with news to all users.

09-09-2021, 10:13	#18 (permalink)
some_info2010 No Life Poster Join Date: Feb 2008 Location: Muzaffarabad Posts: 716 Member: 695543 Status: Offline Sonork: 100.1602536 Thanks Meter: 149	need flash file ta1212

09-18-2021, 12:01	#19 (permalink)
some_info2010 No Life Poster Join Date: Feb 2008 Location: Muzaffarabad Posts: 716 Member: 695543 Status: Offline Sonork: 100.1602536 Thanks Meter: 149	KEYTAK60A_M530_PCB01_gprs_MT6260_S00.M530_YFSPYX_2 10529_V01.bin

12-23-2021, 17:03	#21 (permalink)
babarmughal Freak Poster Join Date: Aug 2016 Location: Karachi (PAKISTAN) Posts: 437 Member: 2609063 Status: Offline Thanks Meter: 103	Hello dear team... why not releasing this ??? or BEST project is end ??

12-27-2021, 11:09	#22 (permalink)
Infinity-BEST Product Supporter Join Date: Jun 2010 Location: Infinity Team support Posts: 606 Member: 1330296 Status: Offline Thanks Meter: 1,137	At the moment [BEST] is under deep rebuilding, new version should comes in some time.

08-04-2022, 12:49	#25 (permalink)
Vlado-sv Junior Member Join Date: May 2011 Location: UA,Stryy Posts: 2 Member: 1573441 Status: Offline Thanks Meter: 0	Hello, please help, I need the file for the firmware Nokia 5310 Ta-1212 with the Ukrainian language.

08-04-2022, 13:14	#26 (permalink)
Vlado-sv Junior Member Join Date: May 2011 Location: UA,Stryy Posts: 2 Member: 1573441 Status: Offline Thanks Meter: 0	Hello, please help, I need the file for the firmware Nokia 5310 Ta-1212 with the Ukrainian language. I also have one downloaded from my phone with Polish, English and Deutsch

08-05-2022, 06:46	#27 (permalink)
ali-f16 Freak Poster Join Date: Oct 2012 Location: IRAN.IR ----عل Posts: 265 Member: 1824614 Status: Offline Sonork: ali_f*******[email protected] Thanks Meter: 112	Hello dear team... why not releasing this ??? or BEST project is end ??

08-30-2022, 07:27	#28 (permalink)
ali-f16 Freak Poster Join Date: Oct 2012 Location: IRAN.IR ----عل Posts: 265 Member: 1824614 Status: Offline Sonork: ali_f*******[email protected] Thanks Meter: 112	1. Make sure device is powered off. Power off, if need. Wait 10 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : Nokia USB Serial Port (COM15) MODE : NOKIA USB SERIAL PORT : 15 BROM : Init BROM BROM init passed! CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000 BROM : SECCFG : 0x00000005 BROM : NOKIA USB SERIAL BROM : 0x05 BL : 0x00 BROM : MEID : 12F77E474364976B5EDEF8373C0EABC8 BROM : Run BootLoader ... BOOT : Run BL ver. 01 BOOT : 0x05 BL : 0x01 BOOT : WD : 0005 BOOT : RTC : Setup ... BOOT : RTC : 000E BOOT : PRJ : PISCES.11.02.11.p1 BOOT : SWR : 11.02.11 AGENT : Look for suitable BootChain in DA ... AGENT : Device AutoID failed! Error : Fail to init protocol! Send log and report.log to support! Include device info also! Reconnect Power/Cable! Operation : Reset Settings [ v1.20 ] 1. Make sure device is powered off. Power off, if need. Wait 10 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : Nokia USB Serial Port (COM15) MODE : NOKIA USB SERIAL PORT : 15 BROM : Init BROM BROM init passed! CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000 BROM : SECCFG : 0x00000005 BROM : NOKIA USB SERIAL BROM : 0x05 BL : 0x00 BROM : MEID : 12F77E474364976B5EDEF8373C0EABC8 BROM : Run BootLoader ... BOOT : Run BL ver. 01 BOOT : 0x05 BL : 0x01 BOOT : WD : 0005 BOOT : RTC : Setup ... BOOT : RTC : 000E BOOT : PRJ : PISCES.11.02.11.p1 BOOT : SWR : 11.02.11 AGENT : Look for suitable BootChain in DA ... AGENT : Device AutoID failed! Error : Fail to init protocol! Send log and report.log to support! Include device info also! Reconnect Power/Cable!

08-30-2022, 12:29	#30 (permalink)
ali-f16 Freak Poster Join Date: Oct 2012 Location: IRAN.IR ----عل Posts: 265 Member: 1824614 Status: Offline Sonork: ali_f*******[email protected] Thanks Meter: 112	Hello What day and date will it be published?