nokia xl rm-1030 dead after flash pls help me phone dead after flashing. trying to upgrade \ card found: S/N 005E:0118 registered to: omotola Connect phone on selected interface... IDM initializing, wait... Checking access to Products folder... Folder for RM-1030 not exist. Attempt to create Prepare done, collect info [Query] : RM1030_V2_1.2.3.21_boot.img , 4.75 MB [Query] : RM1030_V2_1.2.3.21_cache.img , 5.61 MB Stopped by user [Query] : RM1030_V2_1.2.3.21_emmc_appsboot.mbn , 224.14 KB Something went wrong :( IDM initializing, wait... Checking access to Products folder... Folder for RM-1030 exist Prepare done, collect info [Query] : RM1030_V2_1.2.3.21_boot.img , 4.75 MB [Query] : RM1030_V2_1.2.3.21_cache.img , 5.61 MB [Query] : RM1030_V2_1.2.3.21_emmc_appsboot.mbn , 224.14 KB [Query] : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn , 80 B [Query] : RM1030_V2_1.2.3.21_persist.img , 4.21 MB [Query] : RM1030_V2_1.2.3.21_recovery.img , 5.20 MB [Query] : RM1030_V2_1.2.3.21_system.img , 391.36 MB [Query] : RM1030_V2_1.2.3.21_userdata.img , 21.90 MB [Query] : RM1030_V2_1.2.3.21_oemsblhd.mbn , 40 B [Query] : RM1030_V2_1.2.3.21_oemsbl.mbn , 587.74 KB [Query] : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn , 10.38 KB [Query] : RM1030_V2_1.2.3.21_qcsbl.mbn , 152.28 KB [Query] : RM1030_V2_1.2.3.21_fat.bin , 19.20 MB [Query] : RM1030_V2_1.2.3.21_udisk.bin , 40.00 MB [Query] : RM1030_V2_1.2.3.21_preload.img , 354.06 MB [Query] : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img , 18.93 MB [Query] : RM1030_059W156_1.2.3.21_027.vpl , 6.40 KB Files to download : 17 Total size to download : 866.19 MB Downloading now, please, wait... [Download] : RM1030_V2_1.2.3.21_boot.img [Download] : RM1030_V2_1.2.3.21_cache.img [Download] : RM1030_V2_1.2.3.21_emmc_appsboot.mbn [Download] : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn [Download] : RM1030_V2_1.2.3.21_persist.img [Download] : RM1030_V2_1.2.3.21_recovery.img [Download] : RM1030_V2_1.2.3.21_system.img [Download] : RM1030_V2_1.2.3.21_userdata.img [Download] : RM1030_V2_1.2.3.21_oemsblhd.mbn [Download] : RM1030_V2_1.2.3.21_oemsbl.mbn [Download] : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn [Download] : RM1030_V2_1.2.3.21_qcsbl.mbn [Download] : RM1030_V2_1.2.3.21_fat.bin [Download] : RM1030_V2_1.2.3.21_udisk.bin [Download] : RM1030_V2_1.2.3.21_preload.img [Download] : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img [Download] : RM1030_059W156_1.2.3.21_027.vpl Verify files now ..... [Verify Ok] : RM1030_V2_1.2.3.21_boot.img [Verify Ok] : RM1030_V2_1.2.3.21_cache.img [Verify Ok] : RM1030_V2_1.2.3.21_emmc_appsboot.mbn [Verify Ok] : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn [Verify Ok] : RM1030_V2_1.2.3.21_persist.img [Verify Ok] : RM1030_V2_1.2.3.21_recovery.img [Verify Ok] : RM1030_V2_1.2.3.21_system.img [Verify Ok] : RM1030_V2_1.2.3.21_userdata.img [Verify Ok] : RM1030_V2_1.2.3.21_oemsblhd.mbn [Verify Ok] : RM1030_V2_1.2.3.21_oemsbl.mbn [Verify Ok] : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn [Verify Ok] : RM1030_V2_1.2.3.21_qcsbl.mbn [Verify Ok] : RM1030_V2_1.2.3.21_fat.bin [Verify Ok] : RM1030_V2_1.2.3.21_udisk.bin [Verify Ok] : RM1030_V2_1.2.3.21_preload.img [Verify Ok] : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img All done, all files were downloaded! Core : v1.88 , NXP FlashEngine : v1.1 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Ok, Set : RM1030_V2_1.2.3.21_boot.img Ok, Set : RM1030_V2_1.2.3.21_cache.img Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Ok, Set : RM1030_V2_1.2.3.21_fat.bin Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn Ok, Set : RM1030_V2_1.2.3.21_persist.img Ok, Set : RM1030_V2_1.2.3.21_preload.img Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Ok, Set : RM1030_V2_1.2.3.21_recovery.img Ok, Set : RM1030_V2_1.2.3.21_system.img Ok, Set : RM1030_V2_1.2.3.21_udisk.bin Ok, Set : RM1030_V2_1.2.3.21_userdata.img Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again Core : v1.88 , NXP FlashEngine : v1.1 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Ok, Set : RM1030_V2_1.2.3.21_boot.img Ok, Set : RM1030_V2_1.2.3.21_cache.img Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Ok, Set : RM1030_V2_1.2.3.21_fat.bin Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn Ok, Set : RM1030_V2_1.2.3.21_persist.img Ok, Set : RM1030_V2_1.2.3.21_preload.img Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Ok, Set : RM1030_V2_1.2.3.21_recovery.img Ok, Set : RM1030_V2_1.2.3.21_system.img Ok, Set : RM1030_V2_1.2.3.21_udisk.bin Ok, Set : RM1030_V2_1.2.3.21_userdata.img Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again Core : v1.88 , NXP FlashEngine : v1.1 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Ok, Set : RM1030_V2_1.2.3.21_boot.img Ok, Set : RM1030_V2_1.2.3.21_cache.img Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Ok, Set : RM1030_V2_1.2.3.21_fat.bin Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn Ok, Set : RM1030_V2_1.2.3.21_persist.img Ok, Set : RM1030_V2_1.2.3.21_preload.img Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Ok, Set : RM1030_V2_1.2.3.21_recovery.img Ok, Set : RM1030_V2_1.2.3.21_system.img Ok, Set : RM1030_V2_1.2.3.21_udisk.bin Ok, Set : RM1030_V2_1.2.3.21_userdata.img Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again Core : v1.88 , NXP FlashEngine : v1.1 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Ok, Set : RM1030_V2_1.2.3.21_boot.img Ok, Set : RM1030_V2_1.2.3.21_cache.img Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Ok, Set : RM1030_V2_1.2.3.21_fat.bin Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn Ok, Set : RM1030_V2_1.2.3.21_persist.img Ok, Set : RM1030_V2_1.2.3.21_preload.img Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Ok, Set : RM1030_V2_1.2.3.21_recovery.img Ok, Set : RM1030_V2_1.2.3.21_system.img Ok, Set : RM1030_V2_1.2.3.21_udisk.bin Ok, Set : RM1030_V2_1.2.3.21_userdata.img Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Connect Ok Get Phone Initial Info Product : MSM7627A Version : 0.5 Serial : D348DC91 Processing : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_qcsbl.mbn Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_oemsblhd.mbn Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_oemsbl.mbn Init Ok, send data ... Data sent, start flashing [Info] : INFOhasHead == true! Region Flash Done Processing : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Init Ok, send data ... Data sent, start flashing [Info] : INFOhasHead == true! Region Flash Done Processing : RM1030_V2_1.2.3.21_boot.img Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_recovery.img Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_persist.img Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_fat.bin Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_system.img Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_cache.img Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_userdata.img Erase Partition : USERDATA Partition Erase Done Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_udisk.bin Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_preload.img Init Ok, send data ... Data sent, start flashing Region Flash Done Processing : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Init Ok, send data ... Data sent, start flashing Region Flash Done Rebooting phone now Flashing done! Total flash time : 00:05:50 Reboot phone Ok Connect phone on selected interface... Core : v1.88 , NXP FlashEngine : v1.1 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Ok, Set : RM1030_V2_1.2.3.21_boot.img Ok, Set : RM1030_V2_1.2.3.21_cache.img Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Ok, Set : RM1030_V2_1.2.3.21_fat.bin Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn Ok, Set : RM1030_V2_1.2.3.21_persist.img Ok, Set : RM1030_V2_1.2.3.21_preload.img Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Ok, Set : RM1030_V2_1.2.3.21_recovery.img Ok, Set : RM1030_V2_1.2.3.21_system.img Ok, Set : RM1030_V2_1.2.3.21_udisk.bin Ok, Set : RM1030_V2_1.2.3.21_userdata.img Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again Core : v1.88 , NXP FlashEngine : v1.1 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Ok, Set : RM1030_V2_1.2.3.21_boot.img Ok, Set : RM1030_V2_1.2.3.21_cache.img Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Ok, Set : RM1030_V2_1.2.3.21_fat.bin Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn Ok, Set : RM1030_V2_1.2.3.21_persist.img Ok, Set : RM1030_V2_1.2.3.21_preload.img Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Ok, Set : RM1030_V2_1.2.3.21_recovery.img Ok, Set : RM1030_V2_1.2.3.21_system.img Ok, Set : RM1030_V2_1.2.3.21_udisk.bin Ok, Set : RM1030_V2_1.2.3.21_userdata.img Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again Core : v1.88 , NXP FlashEngine : v1.1 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Ok, Set : RM1030_V2_1.2.3.21_boot.img Ok, Set : RM1030_V2_1.2.3.21_cache.img Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Ok, Set : RM1030_V2_1.2.3.21_fat.bin Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn Ok, Set : RM1030_V2_1.2.3.21_persist.img Ok, Set : RM1030_V2_1.2.3.21_preload.img Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Ok, Set : RM1030_V2_1.2.3.21_recovery.img Ok, Set : RM1030_V2_1.2.3.21_system.img Ok, Set : RM1030_V2_1.2.3.21_udisk.bin Ok, Set : RM1030_V2_1.2.3.21_userdata.img Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again |
You killed it by flashing with firmware reserved for HW rev V2. For now only boot repair will help. Always make sure you choose properly FW. !Devices with HW rev V1 can be flashed only with FW V1, HW rev V2 only with FW V2! Why you still use V1.88?? Update V1.92 bring warning before flashing your phone with incompatible revision. I saw you flashed it from dead mode. Why? Are you forgot how to enable WinUSB mode(*#*#2273#*#*)? If you did, phone will be detected by BEST. From V1.93 - BEST uses own ADB layer. The only thing you need to do is connect phone to cable and it will be detected by BEST - another update worth install. Conclusion - install updates and read damn changelogs. |
thks for the reply, phone not vibrating or connecting. pls help me. i av downloading a new file and the latest version of best. how can i repair boot card found: S/N 005E:0118 registered to: omotola Connect phone on selected interface... Core : v1.94 , NXP FlashEngine : v3.0 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_V2_1.2.3.21_059W156_APAC_VN_V2_variant.img Ok, Set : RM1030_V2_1.2.3.21_boot.img Ok, Set : RM1030_V2_1.2.3.21_cache.img Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn Ok, Set : RM1030_V2_1.2.3.21_fat.bin Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn Ok, Set : RM1030_V2_1.2.3.21_persist.img Ok, Set : RM1030_V2_1.2.3.21_preload.img Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn Ok, Set : RM1030_V2_1.2.3.21_recovery.img Ok, Set : RM1030_V2_1.2.3.21_system.img Ok, Set : RM1030_V2_1.2.3.21_udisk.bin Ok, Set : RM1030_V2_1.2.3.21_userdata.img Flashing break by user request IDM initializing, wait... Checking access to Products folder... Folder for RM-1030 exist Prepare done, collect info [Query] : RM1030_1.2.3.1_boot.img , 4.75 MB [Query] : RM1030_1.2.3.1_cache.img , 5.61 MB [Query] : RM1030_1.2.3.1_emmc_appsboot.mbn , 224.14 KB [Query] : RM1030_1.2.3.1_emmc_appsboothd.mbn , 80 B [Query] : RM1030_1.2.3.1_persist.img , 4.21 MB [Query] : RM1030_1.2.3.1_recovery.img , 5.20 MB [Query] : RM1030_1.2.3.1_system.img , 391.37 MB [Query] : RM1030_1.2.3.1_userdata.img , 21.90 MB [Query] : RM1030_1.2.3.1_oemsblhd.mbn , 40 B [Query] : RM1030_1.2.3.1_oemsbl.mbn , 587.74 KB [Query] : RM1030_1.2.3.1_qcsblhd_cfgdata.mbn , 10.38 KB [Query] : RM1030_1.2.3.1_qcsbl.mbn , 152.28 KB [Query] : RM1030_1.2.3.1_fat.bin , 19.20 MB [Query] : RM1030_1.2.3.1_udisk.bin , 40.00 MB [Query] : RM1030_1.2.3.1_preload.img , 354.06 MB [Query] : RM1030_1.2.3.1_059V6R1_IMEA_NG_variant.img , 5.56 MB [Query] : RM1030_059V6R1_1.2.3.1_094.vpl , 6.33 KB Files to download : 17 Total size to download : 852.83 MB Downloading now, please, wait... [Download] : RM1030_1.2.3.1_boot.img [Download] : RM1030_1.2.3.1_cache.img [Download] : RM1030_1.2.3.1_emmc_appsboot.mbn [Download] : RM1030_1.2.3.1_emmc_appsboothd.mbn [Download] : RM1030_1.2.3.1_persist.img [Download] : RM1030_1.2.3.1_recovery.img [Download] : RM1030_1.2.3.1_system.img [Verify , Error] : RM1030_1.2.3.1_system.img [Retry] : RM1030_1.2.3.1_system.img [Download] : RM1030_1.2.3.1_userdata.img [Download] : RM1030_1.2.3.1_oemsblhd.mbn [Download] : RM1030_1.2.3.1_oemsbl.mbn [Download] : RM1030_1.2.3.1_qcsblhd_cfgdata.mbn [Download] : RM1030_1.2.3.1_qcsbl.mbn [Download] : RM1030_1.2.3.1_fat.bin [Download] : RM1030_1.2.3.1_udisk.bin [Download] : RM1030_1.2.3.1_preload.img [Download] : RM1030_1.2.3.1_059V6R1_IMEA_NG_variant.img [Download] : RM1030_059V6R1_1.2.3.1_094.vpl Verify files now ..... [Verify Ok] : RM1030_1.2.3.1_boot.img [Verify Ok] : RM1030_1.2.3.1_cache.img [Verify Ok] : RM1030_1.2.3.1_emmc_appsboot.mbn [Verify Ok] : RM1030_1.2.3.1_emmc_appsboothd.mbn [Verify Ok] : RM1030_1.2.3.1_persist.img [Verify Ok] : RM1030_1.2.3.1_recovery.img [Verify Ok] : RM1030_1.2.3.1_system.img [Verify Ok] : RM1030_1.2.3.1_userdata.img [Verify Ok] : RM1030_1.2.3.1_oemsblhd.mbn [Verify Ok] : RM1030_1.2.3.1_oemsbl.mbn [Verify Ok] : RM1030_1.2.3.1_qcsblhd_cfgdata.mbn [Verify Ok] : RM1030_1.2.3.1_qcsbl.mbn [Verify Ok] : RM1030_1.2.3.1_fat.bin [Verify Ok] : RM1030_1.2.3.1_udisk.bin [Verify Ok] : RM1030_1.2.3.1_preload.img [Verify Ok] : RM1030_1.2.3.1_059V6R1_IMEA_NG_variant.img All done, all files were downloaded! Core : v1.94 , NXP FlashEngine : v3.0 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_1.2.3.1_059V6R1_IMEA_NG_variant.img Ok, Set : RM1030_1.2.3.1_boot.img Ok, Set : RM1030_1.2.3.1_cache.img Ok, Set : RM1030_1.2.3.1_emmc_appsboot.mbn Ok, Set : RM1030_1.2.3.1_emmc_appsboothd.mbn Ok, Set : RM1030_1.2.3.1_fat.bin Ok, Set : RM1030_1.2.3.1_oemsbl.mbn Ok, Set : RM1030_1.2.3.1_oemsblhd.mbn Ok, Set : RM1030_1.2.3.1_persist.img Ok, Set : RM1030_1.2.3.1_preload.img Ok, Set : RM1030_1.2.3.1_qcsbl.mbn Ok, Set : RM1030_1.2.3.1_qcsblhd_cfgdata.mbn Ok, Set : RM1030_1.2.3.1_recovery.img Ok, Set : RM1030_1.2.3.1_system.img Ok, Set : RM1030_1.2.3.1_udisk.bin Ok, Set : RM1030_1.2.3.1_userdata.img File HW revision is : HW Revision V1 Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again Core : v1.94 , NXP FlashEngine : v3.0 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_1.2.3.1_059V6R1_IMEA_NG_variant.img Ok, Set : RM1030_1.2.3.1_boot.img Ok, Set : RM1030_1.2.3.1_cache.img Ok, Set : RM1030_1.2.3.1_emmc_appsboot.mbn Ok, Set : RM1030_1.2.3.1_emmc_appsboothd.mbn Ok, Set : RM1030_1.2.3.1_fat.bin Ok, Set : RM1030_1.2.3.1_oemsbl.mbn Ok, Set : RM1030_1.2.3.1_oemsblhd.mbn Ok, Set : RM1030_1.2.3.1_persist.img Ok, Set : RM1030_1.2.3.1_preload.img Ok, Set : RM1030_1.2.3.1_qcsbl.mbn Ok, Set : RM1030_1.2.3.1_qcsblhd_cfgdata.mbn Ok, Set : RM1030_1.2.3.1_recovery.img Ok, Set : RM1030_1.2.3.1_system.img Ok, Set : RM1030_1.2.3.1_udisk.bin Ok, Set : RM1030_1.2.3.1_userdata.img File HW revision is : HW Revision V1 Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again Core : v1.94 , NXP FlashEngine : v3.0 Flash Mode : Full Update (System, User, Boot) Check and select files according selected FlashMode Ok, Set : RM1030_1.2.3.1_059V6R1_IMEA_NG_variant.img Ok, Set : RM1030_1.2.3.1_boot.img Ok, Set : RM1030_1.2.3.1_cache.img Ok, Set : RM1030_1.2.3.1_emmc_appsboot.mbn Ok, Set : RM1030_1.2.3.1_emmc_appsboothd.mbn Ok, Set : RM1030_1.2.3.1_fat.bin Ok, Set : RM1030_1.2.3.1_oemsbl.mbn Ok, Set : RM1030_1.2.3.1_oemsblhd.mbn Ok, Set : RM1030_1.2.3.1_persist.img Ok, Set : RM1030_1.2.3.1_preload.img Ok, Set : RM1030_1.2.3.1_qcsbl.mbn Ok, Set : RM1030_1.2.3.1_qcsblhd_cfgdata.mbn Ok, Set : RM1030_1.2.3.1_recovery.img Ok, Set : RM1030_1.2.3.1_system.img Ok, Set : RM1030_1.2.3.1_udisk.bin Ok, Set : RM1030_1.2.3.1_userdata.img File HW revision is : HW Revision V1 Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Press and hold 'Volume Down' and 'Power' buttons 3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button 4. Insert USB cable and hold button, until phone will be detected Device boot not done Check Drivers Try again |
There is nothing to do more with USB only. You need repair Boot with some jtag or emmc device and after flash. |
please bro how to check if my phone is V1 or V2 ? |
BEST show during SW selection with green or red text version. In navi you can see in Product Code description "V2" at the end , for ex : V1 PC's : there is no V2 at the end. http://s04.radikal.ru/i177/1409/02/79e229290294.png V2 PC's : there is V2 at the end. http://s011.radikal.ru/i316/1409/3a/ce4d98c1f072.png |
thanks bro but how to know if i must flash my phone with v1 or v2 ? i know now how to chose v1 and v2 but how to know my phone is v1 or v2 ? |
i have this phone now in my hand after flash with v1 phone is dead so how to fix this problem ? |
So, does it hard check your phone product code under battery sticker? It near SIM2 holder. Or picture with bouth PC list gives you nothing? Now read thread from start again. |
from the product code my phone is v2 and am flash it with v1 is this means i need to repair boot now ? |
????????????????????????????????????? |
Bingo! It explained in POST 2 on this thread. |
Quote:
offcourse if your phone is v2 and you flash it with v1 you must repair boot with jtag! already explained in above posts! Regards .::M Irfan::. |
every thing is clear now thanks so match |
i flash nokia xl with wrong HW and phone died.... how can i repair boot and flash again... phone currently not vibrating. pls help me |
All times are GMT +1. The time now is 14:04. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -