Success Test Reports

[Nadeem Waris]

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1172_ROM_eMP_10.01.11
VIVA : RM-1172_VIVA_eMP_10.01.11
LANG : RM-1172_LANG_PACK_ROM_IJ_eMP_10.01.11_001
CUST : RM-1172_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
JMPT : RM-1172_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : CAFA9A0BCF07493BE7D993969A2A5BCD
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DOHA.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Doha.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00DC0000-0x00FF3FFF , LEN : 0x00234000
SecureDecrypt : RM-1172_ROM_eMP_10.01.11
SecureDecrypt : RM-1172_VIVA_eMP_10.01.11
SecureDecrypt : RM-1172_LANG_PACK_ROM_IJ_eMP_10.01.11_001
SecureDecrypt : RM-1172_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
SecureDecrypt : RM-1172_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : DOHA.10.01.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1172_ROM_eMP_10.01.11
Write : RM-1172_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : RM-1172_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1172_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1172_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1172_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1172_LANG_PACK_ROM_IJ_eMP_10.01.11_001
[VERIFY] DONE : RM-1172_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1172_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1172_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00DC0000-0x00FF3FFF , LEN : 0x00234000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:03:20
Reboot phone Ok

[Nadeem Waris]

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1035_ROM_eMP_10.01.11
VIVA : RM-1035_VIVA_eMP_10.01.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : E685758D20C4245F135DDD9935B8C79E
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.14.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.01.11
SecureDecrypt : RM-1035_VIVA_eMP_10.01.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.14.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.01.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:04
Reboot phone Ok

[Luckey1]

Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM342)
MODE : NOKIA USB SERIAL
PORT : 342
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0D9184DE62FDDA0AC7D9B4ADB5392946
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : SUEZ.30.01.11.p1
BOOT : SWR : 30.01.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : SUEZ.30.01.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00EF : 0060 : 0018 : 0000
NOR: [WINBOND] W25Q128FW
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 30.01.11 [RM-1187]
DEV SoftwareVersion : 30.01.11
SWInfo compare result : SAME

Load FlashSet :
MROM : RM-1187_SUEZ_ROM_eMP_30.01.11
LANG : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_30.01.11
CUST : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_30.01.11
JUMP : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_30.01.11
VIVA : RM-1187_SUEZ_VIVA_eMP_30.01.11

Prepare FlashSet :
DCR : RM-1187_SUEZ_ROM_eMP_30.01.11
DCR : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_30.01.11
DCR : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_30.01.11
DCR : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_30.01.11
DCR : RM-1187_SUEZ_VIVA_eMP_30.01.11

Prepare Target
SDS : OK : 0x00FF4000 : 0x0000C000
FFS Format Ok!

Erase Target Flash
Erase done!

Write Target Flash
Write : RM-1187_SUEZ_ROM_eMP_30.01.11
Write : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_30.01.11
Write : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_30.01.11
Write : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_30.01.11
Write : RM-1187_SUEZ_VIVA_eMP_30.01.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : _SUEZ_ROM_eMP_30.01.11
Verify : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_30.01.11
Verify : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_30.01.11
Verify : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_30.01.11
Verify : RM-1187_SUEZ_VIVA_eMP_30.01.11

Done!
Elapsed: 00:03:27

Reconnect Power/Cable!

[Gsm Xlocker]

Operation : Reset Settings ( Format FS ) [ v1.16 ]

1. Power off device, remove battery
2. Insert cable, press and hold BootKey ( # )
3. Insert battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD SECURE BOOT Block version
BootVersion : BEST RETRO3G
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

Erase BLK #0
Erase BLK #1
Erase BLK #2
Erase BLK #3

Format Ok!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

[Nadeem Waris]

Connect phone on selected interface...

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1190_DUBAI_ROM_eMP_30.00.11
VIVA : RM-1190_DUBAI_VIVA_eMP_30.00.11
LANG : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
CUST : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
JMPT : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 188F942C1CB5837D4FC61728D5B339B1
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.11.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP : 00100000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 ,
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
SecureDecrypt : RM-1190_DUBAI_ROM_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_VIVA_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : DUBAI61D.11.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1190_DUBAI_ROM_eMP_30.00.11
Write : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_VIVA_eMP_30.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1190_DUBAI_ROM_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_VIVA_eMP_30.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time : 00:00:50
Reboot phone Ok

ReadInfo can't be done! Re-insert battery and power up phone manually

[Nadeem Waris]

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1011_ROM_eMP_30.06.11
VIVA : RM-1011_VIVA_eMP_30.06.11
LANG : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
CUST : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
JMPT : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 59 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 66B8FF4EA6030A86FBBC08D0373272D8
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1011_ROM_eMP_30.06.11
SecureDecrypt : RM-1011_VIVA_eMP_30.06.11
SecureDecrypt : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
SecureDecrypt : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
SecureDecrypt : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
OVRLP : 000069B900000001
PHPID : PEARL.20.10.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1011_ROM_eMP_30.06.11
Write : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
Write : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
Write : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
Write : RM-1011_VIVA_eMP_30.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1011_ROM_eMP_30.06.11
[VERIFY] DONE : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_VIVA_eMP_30.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:39
Reboot phone Ok

[Nadeem Waris]

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1011_ROM_eMP_21.00.11
VIVA : RM-1011_VIVA_eMP_21.00.11
LANG : RM-1011_LANG_PACK_ROM_ER_eMP_21.00.11_002
CUST : RM-1011_CUSTPACK_ROM_ER_EURO_IL_eMP_21.00.11_002
JMPT : RM-1011_JUMP_TABLE_ER_EURO_IL_eMP_21.00.11_002
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 66B8FF4EA6030A86FBBC08D0373272D8
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.30.06.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1011_ROM_eMP_21.00.11
SecureDecrypt : RM-1011_VIVA_eMP_21.00.11
SecureDecrypt : RM-1011_LANG_PACK_ROM_ER_eMP_21.00.11_002
SecureDecrypt : RM-1011_CUSTPACK_ROM_ER_EURO_IL_eMP_21.00.11_002
SecureDecrypt : RM-1011_JUMP_TABLE_ER_EURO_IL_eMP_21.00.11_002
OVRLP : 000069B900000001
PHPID : PEARL.30.06.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1011_ROM_eMP_21.00.11
Write : RM-1011_LANG_PACK_ROM_ER_eMP_21.00.11_002
Write : RM-1011_CUSTPACK_ROM_ER_EURO_IL_eMP_21.00.11_002
Write : RM-1011_JUMP_TABLE_ER_EURO_IL_eMP_21.00.11_002
Write : RM-1011_VIVA_eMP_21.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1011_ROM_eMP_21.00.11
[VERIFY] DONE : RM-1011_LANG_PACK_ROM_ER_eMP_21.00.11_002
[VERIFY] DONE : RM-1011_CUSTPACK_ROM_ER_EURO_IL_eMP_21.00.11_002
[VERIFY] DONE : RM-1011_JUMP_TABLE_ER_EURO_IL_eMP_21.00.11_002
[VERIFY] DONE : RM-1011_VIVA_eMP_21.00.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:51
Reboot phone Ok

[Nadeem Waris]

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1190_DUBAI_ROM_eMP_30.00.11
VIVA : RM-1190_DUBAI_VIVA_eMP_30.00.11
LANG : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
CUST : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
JMPT : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : BEC82E2EC0288416885EA4C64D29FDB3
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.30.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP : 00100000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 ,
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
SecureDecrypt : RM-1190_DUBAI_ROM_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_VIVA_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
SecureDecrypt : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : DUBAI61D.30.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1190_DUBAI_ROM_eMP_30.00.11
Write : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
Write : RM-1190_DUBAI_VIVA_eMP_30.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1190_DUBAI_ROM_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_30.00.11
[VERIFY] DONE : RM-1190_DUBAI_VIVA_eMP_30.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time : 00:00:50
Reboot phone Ok

[Nadeem Waris]

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 12 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : D74D92EB9791C01DCF1EC48A3E7738B1
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.30.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP : 00100000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 ,
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000

Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Elapsed: 00:00:17
Connect phone on selected interface...

[SAGAR NADEEM]

Core : v2.28 , MTKx FlashEngine : v12.0

Verify files ...
MAUI : RM-944_ROM_eMP_20.06.11
VIVA : RM-944_VIVA_eMP_20.06.11
LANG : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
CUST : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
JMPT : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 8E1E187A9EA6EC6547E113F997AB5FFD
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
SecureDecrypt : RM-944_ROM_eMP_20.06.11
SecureDecrypt : RM-944_VIVA_eMP_20.06.11
SecureDecrypt : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
SecureDecrypt : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
SecureDecrypt : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
OVRLP : 000069B900000001
PHPID : Bree.20.06.11.p4
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-944_ROM_eMP_20.06.11
Write : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
Write : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
Write : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
Write : RM-944_VIVA_eMP_20.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-944_ROM_eMP_20.06.11
[VERIFY] DONE : RM-944_LANG_PACK_ROM_IJ_eMP_20.06.11
[VERIFY] DONE : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.06.11
[VERIFY] DONE : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_20.06.11
[VERIFY] DONE : RM-944_VIVA_eMP_20.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:00:58
Reboot phone Ok

Connect phone on selected interface...

[Luckey1]

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM306)
MODE : NOKIA USB SERIAL
PORT : 306
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 032D8E7DBA8638F91DAB9C033EFC2C3B
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : DOHA.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : DOHA.10.01.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00C2 : 0025 : 0038 : 0000
NOR: [MXIC] MX25U12835FZNI_10G
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00DC0000 : 0x00234000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:37

Reconnect Power/Cable!

[Nadeem Waris]

Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM34)
MODE : NOKIA USB SERIAL
PORT : 34
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 7D5E20F013B5C88B7E443907051ABA38
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : OUTRUN.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : OUTRUN.10.01.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00EF : 0060 : 0018 : 0000
NOR: [WINBOND] W25Q128FW
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.01.11 [TA-1139]
DEV SoftwareVersion : 10.01.11
SWInfo compare result : SAME

Load FlashSet :
MROM : TA-1139_ROM_eMP_10.01.11
LANG : TA-1139_LANG_PACK_ROM_IJ_eMP_10.01.11_001
CUST : TA-1139_CUSTPACK_ROM_IJ_eMP_10.01.11_001
JUMP : TA-1139_JUMP_TABLE_IJ_eMP_10.01.11_001
VIVA : TA-1139_VIVA_eMP_10.01.11

Prepare FlashSet :
DCR : TA-1139_ROM_eMP_10.01.11
DCR : TA-1139_LANG_PACK_ROM_IJ_eMP_10.01.11_001
DCR : TA-1139_CUSTPACK_ROM_IJ_eMP_10.01.11_001
DCR : TA-1139_JUMP_TABLE_IJ_eMP_10.01.11_001
DCR : TA-1139_VIVA_eMP_10.01.11

Prepare Target
SDS : OK : 0x00FF4000 : 0x0000C000
FFS Format Ok!

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1139_ROM_eMP_10.01.11
Write : TA-1139_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : TA-1139_CUSTPACK_ROM_IJ_eMP_10.01.11_001
Write : TA-1139_JUMP_TABLE_IJ_eMP_10.01.11_001
Write : TA-1139_VIVA_eMP_10.01.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1139_ROM_eMP_10.01.11
Verify : TA-1139_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Verify : TA-1139_CUSTPACK_ROM_IJ_eMP_10.01.11_001
Verify : TA-1139_JUMP_TABLE_IJ_eMP_10.01.11_001
Verify : TA-1139_VIVA_eMP_10.01.11

Done!
Elapsed: 00:02:45

Reconnect Power/Cable!

[Luckey1]

Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM254)
MODE : NOKIA USB SERIAL
PORT : 254
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 0257C77F41E26B3408BA6B00FF1FA142
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : DUBAI61D.11.00.11.p1
BOOT : SWR : 11.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : DUBAI61D.11.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 11.00.11 [RM-1190]
DEV SoftwareVersion : 11.00.11
SWInfo compare result : SAME

Load FlashSet :
MROM : RM-1190_DUBAI_ROM_eMP_11.00.11
LANG : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
CUST : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
JUMP : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
VIVA : RM-1190_DUBAI_VIVA_eMP_11.00.11

Prepare FlashSet :
DCR : RM-1190_DUBAI_ROM_eMP_11.00.11
DCR : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
DCR : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
DCR : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
DCR : RM-1190_DUBAI_VIVA_eMP_11.00.11

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000
FFS Format Ok!

Erase Target Flash
Erase done!

Write Target Flash
Write : RM-1190_DUBAI_ROM_eMP_11.00.11
Write : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
Write : RM-1190_DUBAI_VIVA_eMP_11.00.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : RM-1190_DUBAI_ROM_eMP_11.00.11
Verify : RM-1190_DUBAI_LANG_PACK_ROM_IJ_eMP_11.00.11
Verify : RM-1190_DUBAI_CUSTPACK_ROM_IJ_eMP_11.00.11
Verify : RM-1190_DUBAI_JUMP_TABLE_IJ_eMP_11.00.11
Verify :_DUBAI_VIVA_eMP_11.00.11

Done!
Elapsed: 00:01:10

Reconnect Power/Cable!

[pintu_das]

Card found : ADCE8487 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20


Operation : Identify [FTM] [ v1.20 ]

-> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable
-> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear

Wait for phone...
Connect Ok!
Device Found!
Initialize ...
Initialize Ok!

Dev Model : PDA
HW RF_BAND : G_850_900_1800_1900^W_1_5_8^L_1_3_5_7_8_20_28_38
SW version : PDA-220A-0-00WW-B02
SW CurrSlot : _A
SW serialnm : PDAGAA6884103899
SW secured : YES
Project DevCode : PDA1
Bootloader type : RETAIL
Security Version : 0004

Done!
Elapsed: 00:00:05

Reconnect Power/Cable!

Operation : Reset Settings [FTM] [ v1.20 ]

-> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable
-> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear

Wait for phone...
Connect Ok!
Device Found!
Initialize ...
Initialize Ok!

Info : Model supported standalone in Nokia MTK [SP] tab!

Break by user !
Check previous message for more info!

Reconnect Power/Cable!

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
- > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : DSLevel : DEV_KEY+DEV_ARB
BROM : BOOTROM
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SOCID : 5E06F74AF2BF23FE93D323E30E170B70E477378A64A63F43BB A565D16AF44724
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6771
AGENT : BEST_Nokia_DA_v19_1711_06
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A68423861503E0167145086555
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 4C95909CF7DD5675CCEC85166FC152C1

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

[kothamamun]

Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM50)
MODE : NOKIA USB SERIAL
PORT : 50
BROM : Init BROM
BROM init passed!
     CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : BDF122A3D1C6C5605B4586661AE324B7
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : NEMO61D.10.00.11.p2
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

        NOR: 00C8 : 0060 : 0016 : 0000
        NOR: [GigaDevice] GD25LQ32
        NOR: 
              TSIZE  : 0x00400000 [ 4.00 MB ]
              PSIZE  : 0x00400000 [ 4.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_EXIST

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00370000  :  0x00088000
FFS Format ... 
FFS Format Ok!

Done!
Elapsed: 00:01:19

Reconnect Power/Cable!

Operation : Read FirmWare [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM50)
MODE : NOKIA USB SERIAL
PORT : 50
BROM : Init BROM
BROM init passed!
     CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : BDF122A3D1C6C5605B4586661AE324B7
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : NEMO61D.10.00.11.p2
FLASH : 00C2 : 0025 : 0036 : 0000
CODE  : 0x00370000
Reading Flash ... 
TDSN : TA-1114
PRDC : 059Z0X8
PPM  : MS
LANG : 
[1] : English (United Kingdom)

BUILD : TA-1114_ROM_eMP_10.00.11
BUILD : TA-1114_LANG_PACK_ROM_MS_eMP_10.00.11_001
BUILD : TA-1114_CUSTPACK_ROM_MS_eMP_10.00.11_001
BUILD : TA-1114_JUMP_TABLE_MS_eMP_10.00.11_001
BUILD : TA-1114_VIVA_eMP_10.00.11

Make VPL definition

Save Path : D:\Nokia Flash file\TA-1114\
Save Name : TA-1114_059Z0X8_10.00.11.vpl

Build Finished!

Done!
Elapsed: 00:02:20

Reconnect Power/Cable!