GSM-Forum
Page 11 of 90 « First 8910 11 1213142161 Last »
Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   BB5 Easy Service Tool (BEST) Nokia Dongle (https://forum.gsmhosting.com/vbb/f641/)
-   -   Success Test Reports (https://forum.gsmhosting.com/vbb/f641/success-test-reports-2192308/)

Xperia™ 07-25-2017 09:36
640 lte rm-1073 direct unlock successful
 
[WP8x] : Init TesMode
[TSTM] : Use File : RM1073_2179.0000.9651.15153.207.760_enosw-wim-signed_858223.secwim
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Boot Mode confirmed!
Setting Preloder
Collect Info...
Setting Application
Setting Secure
Collect Info...
=== Nokia Flash App info :
Protocol Version : 2.37
Protocol Implementation : 2.60
=== Phone Initial info :
Phone RMxxx ID : RM-1073
Phone Model ID : Nokia.MSM8926.P6204.1.1
Phone Model PC : 059X0B6
Phone IMEI : 357815061238820
=== eMMC info :
eMMC Vendor : Samsung
eMMC CID : 0015
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey : 831BE6B18E7006372069545885A80F786C33D064
=== Other info :
SD present : False

SECWIM : RM1073_2179.0000.9651.15153.207.760_enosw-wim-signed_858223.secwim
Sending WIM ...

WIM Image sent! Trying init TestMode now...

Connect phone on selected interface...

Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok

WP8 Unlock Started
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version is valid
Processing Step #1
Processing Step #2
Processing Step #3
Processing Step #4
Disconnected
Need SDAuth to finish ...
Started
Connecting to SX4 server...
Connected
SX4 enter ..
SDAuth Ok!
SX4 Disconnected
Unlock Done!
Wait for phone reboot ...
Reboot Ok!

Phone disconected!

Connect phone on selected interface...

Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok

Yusuf Lawal 07-25-2017 19:12
NOKIA ASHA 206 RM-873 REBOOT WHEN CLICK ON APP DONE BY INFINITY BEST
Code:
Card found: S/N : A6936825 , v0136
Registered to: Yuslam Unique

Connect phone on selected interface...

Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm873__04.51.mcusw
PPM : rm873__04.51.ppm_s4
CNT : rm873__04.51.image_s4_059Q7D8
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI : 356702058969099
PCcode : 059R7W0

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\356702058969099_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

  ===Flashing [MCU]===
File : rm873__04.51.mcusw
Image : rm873__04.51.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:04
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:02:05
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:29
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xD092

  ===Flashing [PPM]===
File : rm873__04.51.ppm_s4
Image : package_s4.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00680000
Erasing, wait ...
Erase done, time : 00:00:24
Write , Start : 0x41A80000 , Len : 0x005FD858
Flashing , wait ...
Region flash done, time : 00:00:07
CRC check passed , 0xCF20

  ===Flashing [CNT]===
File : rm873__04.51.image_s4_059Q7D8
Image : package_s4_059Q7D8.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42100000 , Len : 0x01D20000
Erasing, wait ...
Erase done, time : 00:04:19
Write , Start : 0x42100000 , Len : 0x010A0000
Flashing , wait ...
Region flash done, time : 00:00:27
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:08
No write data, skip
CRC check passed , 0x272F

Flashing done!
Total flash time : 00:08:10
Reboot phone now...

 - > AfterFlash Failed! :( Reason : Downgrade try or HW Error
    Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!
Connect phone on selected interface...


Elapsed: 00:10:25
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

syed tuqeer 07-27-2017 06:57
Nokia C3-01 Write Firmware Done :)
 
Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm640__07.51.mcusw
PPM : rm640__07.51.ppm_meac
CNT : rm640__07.51.image_meac_0599545_008
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
->  Check SW version...
FlashFile version : 07.51
Phone version : 07.51 12-07-12 RM-640 (c) Nokia           
->  Check SW version : Reflash
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
WMDRM read ... Ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:      000000030000022600010007600C192102031104
CPU ID :      RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:    16400205FFD803446D2D56BE58041E7F0491684F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00300098
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:20
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 5AA09885C97BF3B0F6783A6337506F9394F346EF
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 357019049735052
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\357019049735052_2nd.rpl


 === SW Version Check ===
- > REFLASHING
 === SW Version Check ===

  ===Flashing [MCU]===
Erase : Processing rm640__07.51.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm640__07.51.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 264 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

  ===Flashing [PPM]===
Erase : Processing rm640__07.51.ppm_meac
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm640__07.51.ppm_meac
Total writen 58 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

  ===Flashing [CNT]===
Erase : Processing rm640__07.51.image_meac_0599545_008
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm640__07.51.image_meac_0599545_008
Total writen 294 blocks
TIME : Write time : 00:00:05
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:16
Reboot phone now...

Reading Phone Info....
Connected phone -  Nokia C3-01
Software Info:    V 07.51 12-07-12 RM-640 (c) Nokia           
IMEI:  357019049735052
PPM version :  V 07.51 12-07-12 RM-640 (c) Nokia            MEC
Product code:  0599673
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 39 certs
Certificates found, skip upload ...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Phone disconected!

Connect phone on selected interface...

Elapsed: 00:01:23
Connect phone on selected interface...

syed tuqeer 07-27-2017 10:29
NOkia C2-00 Write Firmware Done :)
 
Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm704__03.99.mcusw
PPM : rm704__03.99.ppm_m_a
CNT : rm704__03.99.image_m_a_magenta_059C1L7
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.44_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 357417041971420
IMEI 2 : 357417041971438
PCcode : 059J4Z7

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\357417041971420_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

  ===Flashing [MCU]===
File : rm704__03.99.mcusw
Image : rm704__03.99.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:13
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:34
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0x6C69

  ===Flashing [PPM]===
File : rm704__03.99.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:18
Write , Start : 0x41BC0000 , Len : 0x0034C73C
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0x6D09

  ===Flashing [CNT]===
File : rm704__03.99.image_m_a_magenta_059C1L7
Image : package_m_a_magenta_059C1L7.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:04:21
Write , Start : 0x421C0000 , Len : 0x00A00000
Flashing , wait ...
Region flash done, time : 00:00:16
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:08
No write data, skip
CRC check passed , 0x9B4F

Flashing done!
Total flash time : 00:08:05
Reboot phone now...

Reading Phone Info....
Connected phone -  C2-00
Software Info:    V 03.99 03-04-12 RM-704 (c) Nokia           
IMEI:  357417041971420
PPM version :  V 03.99 03-04-12 RM-704 (c) Nokia            M_A
Product code:  059J4Z7
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
===== WARNING =====
Battery voltage is can be not enough for start
===== WARNING =====
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:09:10
Connect phone on selected interface...

syed tuqeer 07-27-2017 10:31
Nokia 108 Read User Code Done :)
 
Code:
Connect phone on selected interface...

Phone found!
MTKx Nokia Phone detected
Read info... Ok


Reading Phone Info....
Software ver : 20.06.11 00-00-00 RM-944
IMEI 1  :      351725066883965
IMEI 2  :      351725066883973
XappVer :      000008F2
Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM    :      IJ
CNT    :      Bree.20.06.11.p4
Product SN  :    7AC00F0BH
Product code :    059S7R0
Base Prd.code:    059S0R7
Module code  :    0205624
Hardware info=======
HWID  : 1003
LCDVer: TPO
Lock info ===========
IMEI      : 351725066883965
IMEI spNet : 3A 15 27 05 66 88 93 56

Conf key    : 800000000004000B
Provider key : 0010100000000000
Country      : Test SIM (Open)
Operator    : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 

SimLock status : Ok
Security status : Ok

Done!

Software Info:    20.06.11 00-00-00 RM-944
IMEI:  351725066883965
PPM version :  IJ
Product code:  059S7R0
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 174 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : F17062DD0357BF9F948F84236D3E53A5
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA0_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
MT625x : Read User Code

User Code : 14723

Done!
Connect phone on selected interface...

syed tuqeer 07-27-2017 10:34
Nokia 220 Write FIrmware Done :)
 
Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-969_ROM_eMP_31.01.11
VIVA : RM-969_VIVA_eMP_31.01.11
LANG : RM-969_LANG_PACK_ROM_IC_eMP_31.01.11_001
CUST : RM-969_CUSTPACK_ROM_IC_MEA_JO_eMP_31.01.11_001
JMPT : RM-969_JUMP_TABLE_IC_MEA_JO_eMP_31.01.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 94 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : E9B1C4F880D0DC9F3BE8B107B21CE52B
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Rivendell.31.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_AUTH  : Passed!
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
SecureDecrypt : RM-969_ROM_eMP_31.01.11
SecureDecrypt : RM-969_VIVA_eMP_31.01.11
SecureDecrypt : RM-969_LANG_PACK_ROM_IC_eMP_31.01.11_001
SecureDecrypt : RM-969_CUSTPACK_ROM_IC_MEA_JO_eMP_31.01.11_001
SecureDecrypt : RM-969_JUMP_TABLE_IC_MEA_JO_eMP_31.01.11_001
OVRLP : 000069B900000001
PHPID : Rivendell.31.01.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-969_ROM_eMP_31.01.11
Write : RM-969_LANG_PACK_ROM_IC_eMP_31.01.11_001
Write : RM-969_CUSTPACK_ROM_IC_MEA_JO_eMP_31.01.11_001
Write : RM-969_JUMP_TABLE_IC_MEA_JO_eMP_31.01.11_001
Write : RM-969_VIVA_eMP_31.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-969_ROM_eMP_31.01.11
[VERIFY] DONE : RM-969_LANG_PACK_ROM_IC_eMP_31.01.11_001
[VERIFY] DONE : RM-969_CUSTPACK_ROM_IC_MEA_JO_eMP_31.01.11_001
[VERIFY] DONE : RM-969_JUMP_TABLE_IC_MEA_JO_eMP_31.01.11_001
[VERIFY] DONE : RM-969_VIVA_eMP_31.01.11
CODE_VERIFY : Ok
Will Upload FAT Image now
Write : RM-969_FATIMAGE_IC_31.01.11
FAT Image Flash done!
FAT Verify Ok
Rebooting phone now

Flashing done!
Total flash time : 00:04:51
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:    31.01.11 00-00-00 RM-969
IMEI:  353058064719744
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :  IC
Product code:  059V4M4
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok

syed tuqeer 07-27-2017 10:36
Nokia 225 Write Firmware Done :)
 
Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1011_ROM_eMP_30.06.11
VIVA : RM-1011_VIVA_eMP_30.06.11
LANG : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
CUST : RM-1011_CUSTPACK_ROM_IJ_MEA_IR_eMP_30.06.11_001
JMPT : RM-1011_JUMP_TABLE_IJ_MEA_IR_eMP_30.06.11_001
 - > MODE : FullFlash
Software Info:    20.10.11 00-00-00 RM-1011
IMEI:  356478064723263
PPM version :  IJ
Product code:  059V5V2
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 94 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C699BC1EC864EA6E67293E77B9C738B7
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_AUTH  : Passed!
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1011_ROM_eMP_30.06.11
SecureDecrypt : RM-1011_VIVA_eMP_30.06.11
SecureDecrypt : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
SecureDecrypt : RM-1011_CUSTPACK_ROM_IJ_MEA_IR_eMP_30.06.11_001
SecureDecrypt : RM-1011_JUMP_TABLE_IJ_MEA_IR_eMP_30.06.11_001
OVRLP : 000069B900000001
PHPID : PEARL.20.10.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1011_ROM_eMP_30.06.11
Write : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
Write : RM-1011_CUSTPACK_ROM_IJ_MEA_IR_eMP_30.06.11_001
Write : RM-1011_JUMP_TABLE_IJ_MEA_IR_eMP_30.06.11_001
Write : RM-1011_VIVA_eMP_30.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1011_ROM_eMP_30.06.11
[VERIFY] DONE : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_CUSTPACK_ROM_IJ_MEA_IR_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_JUMP_TABLE_IJ_MEA_IR_eMP_30.06.11_001
[VERIFY] DONE : RM-1011_VIVA_eMP_30.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET  : DA_IN_PROGRESS
DA_RET  : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:55
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:    30.06.11 00-00-00 RM-1011
IMEI:  356478064723263
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :  IJ
Product code:  059V5V2
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Reading Phone Info....
Software ver : 30.06.11 00-00-00 RM-1011
IMEI 1  :      356478064723263
IMEI 2  :      356478064723271
XappVer :      000008F2
Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM    :      IJ
CNT    :      PEARL.30.06.11.p2
Product SN  :    790FF62BH
Product code :    059V5V2
Base Prd.code:    059W429
Module code  :    0206308
Hardware info=======
HWID  : 1001
LCDVer: TPO
Lock info ===========
IMEI      : 356478064723263
IMEI spNet : 3A 65 74 08 46 27 23 36

Conf key    : 800000000004000B
Provider key : 2440700000000000
Country      : Finland
Operator    : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 

SimLock status : Ok
Security status : Ok

Done!

Phone disconected!

Connect phone on selected interface...

syed tuqeer 07-27-2017 10:39
Nokia 2730 Read User Code DOne :)
 
Code:
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia 2730 classic
Software ver : V 10.45 05-07-10 RM-578 (c) Nokia           
IMEI    :      353396048081645
XappVer :      000008F2
DSP Ver :      ICPR72_10w01_Tommy
PPM    :      V 10.45 05-07-10 RM-578 (c) Nokia            X
CNT    :      Content: ctv ID V 10.45 05-07-10 RM-578 (c) Nokia             
Product SN  :    2A39E25AI
Product code :    059C0R4
Base Prd.code:    059C5X3
Module code  :    0204764
Long Prod.SN :    0
Hardware info=======
HWID  : 3011
Retu  : 16
Tahvo : 22
Battery: 4628 mV
CMT BT: 2.31-SP2.26
LCDVer: SEIKO
Lock info ===========
IMEI      : 353396048081645
IMEI spNet : 3A 35 93 06 84 80 61 04
IMEI svNet : 33 35 93 06 84 80 61 64 F0

Conf key    : 0000000000000000
Provider key : 2440700000000000
Country      : Finland
Operator    : NOKIA (Open)
Counters    : Key 0  [3] , Fbus 0  [10]
Blocks      : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
Error collect lock info, try again
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL3 phone ,  SP_CODE_LEN : 15

User Code : 626677
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

syed tuqeer 07-27-2017 10:40
Asha 202 Write Firmware Done :)
 
Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm834__20.52.mcusw
PPM : rm834__20.52.ppm_m_a
CNT : rm834__20.52.image_m_a_059M6C0
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
->  Check SW version...
FlashFile version : 20.52
Phone version : 20.28 22-03-12 RM-834 (c) Nokia           
->  Check SW version : Upgrade
Backup CRT308 data...
CRT308 Backup Created
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Check communication with phone...

SL3 Simlock read (XGOLD) ... Ok
WMDRM Key read ... Ok
CMLA Key read ... Ok

Reboot....

-> If Phone start charge - just reinsert battery fast

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.47_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 353272052692942
IMEI 2 : 353272052692959
PCcode : 059M6C0

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
CMLA_KEY Data saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\353272052692942_XG213.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

  ===Flashing [MCU]===
File : rm834__20.52.mcusw
Image : rm834__20.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:02
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01B40000
Erasing, wait ...
Erase done, time : 00:00:55
Write , Start : 0x40280000 , Len : 0x01AC0000
Flashing , wait ...
Region flash done, time : 00:00:49
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xD2A9

  ===Flashing [PPM]===
File : rm834__20.52.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41DC0000 , Len : 0x00700000
Erasing, wait ...
Erase done, time : 00:00:09
Write , Start : 0x41DC0000 , Len : 0x0041B6E4
Flashing , wait ...
Region flash done, time : 00:00:05
CRC check passed , 0xBBFE

  ===Flashing [CNT]===
File : rm834__20.52.image_m_a_059M6C0
Image : package_m_a_059M6C0.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x424C0000 , Len : 0x01960000
Erasing, wait ...
Erase done, time : 00:01:05
Write , Start : 0x424C0000 , Len : 0x00CC0000
Flashing , wait ...
Region flash done, time : 00:00:19
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:02
No write data, skip
CRC check passed , 0xC996

Flashing done!
Total flash time : 00:03:32
Reboot phone now...

Reading Phone Info....
Connected phone -  202
Software Info:    V 20.52 27-09-12 RM-834 (c) Nokia           
IMEI:  353272052692942
PPM version :  V 20.52 27-09-12 RM-834 (c) Nokia            M_A
Product code:  059M6C0
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:20
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

syed tuqeer 07-27-2017 10:44
Nokia C3 Read User Code Done :)
 
Code:
Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:      000000000000000022000509200C0000
CPU ID :      BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB
EM0 ID:        00005361
PUBLIC ID:    0000000000216E0B836D9C222C2D1069ABDFF2C2
ASIC MODE ID:  00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID:        DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg  ,  Rev : 2.1  Ver : 12.8.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg  ,  Rev : 2.1  Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:21
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 354844042031008
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot

Wait, reconneting...

SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
CMLA Key read ... Ok
WMDRM read ... Ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
CMLA_KEY Data saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\354844042031008.rpl

All done, Disconnecting

Elapsed: 00:01:57
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info...  - Ok



Reading User code...
User Code is: 72985
Done!

syed tuqeer 07-27-2017 10:47
Nokia E5 Write FIrmware DOne :)
 
Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm632_101.003_prd.core.fpsx
PPM : rm632_101.003_27.01_MEA_A_prd.rofs2.fpsx
PPM2 : rm632_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_101.003_U010.000_prd.uda.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
->  Check SW version...
FlashFile version : 101.003
Phone version : 101.003
->  Check SW version : Reflash
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
WMDRM read ... Ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:      000000030000022600010007600C192102031104
CPU ID :      RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:    12700012CAD80344A632F5B719B2DFE63300B042
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:13
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 357413045095522
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\357413045095522_2nd.rpl


 === SW Version Check ===
- > REFLASHING
 === SW Version Check ===

  ===Flashing [MCU]===
Erase : Processing rm632_101.003_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm632_101.003_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 433 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

  ===Flashing [PPM]===
Erase : Processing rm632_101.003_27.01_MEA_A_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm632_101.003_27.01_MEA_A_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 221 blocks
TIME : Write time : 00:00:08
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

  ===Flashing [PPM2]===
Erase : Processing rm632_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm632_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 35 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

  ===Flashing [CNT]===
Erase : Processing rm632_101.003_U010.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm632_101.003_U010.000_prd.uda.fpsx
Total writen 97 blocks
TIME : Write time : 00:00:05
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:41
Reboot phone now...

Reading Phone Info....
Connected phone -  Nokia E5-00
Software Info:    V ICPR82_11w16.3.13 15-06-12 RM-632 (c) Nokia
IMEI:  357413045095522
Ape Version: 101.003
Product code:  0595222
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:01:21
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

syed tuqeer 07-27-2017 10:50
Nokia 101 Factory Reset Done :)
 
Code:
Connect phone on selected interface...

UFS S/N 103896 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
SW ver  : V 06.25 25-08-11 RM-769 (c) Nokia
IMEI    :      359739040371221
PPM    :      V 06.25
25-08-11
RM-769
(c) Nokia
IJ
PCode  :      059G7Q6
BPCode  :      059F6L6
HWID    :      1000
LCDVer  :      WIN:BARACOAv95
NT39121
IMEI    :      359739040371221
Sl Conf  : 001-01-00000000000
Sl Prof  : 000000000004000-2
Sl Aux  : 000B0000
Hw Sig  : F078A7353D885F54
Country      : Test SIM (Open)
Operator    : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 

Done!

Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:11

syed tuqeer 07-27-2017 10:51
Nokia 130 Write Firmware Done :)
 
Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1035_ROM_eMP_11.00.11
VIVA : RM-1035_VIVA_eMP_11.00.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 94 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 831BA278A87D10B4E55411613C3C852A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_AUTH  : Passed!
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_11.00.11
SecureDecrypt : RM-1035_VIVA_eMP_11.00.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_11.00.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
Write : RM-1035_VIVA_eMP_11.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_11.00.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_VIVA_eMP_11.00.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET  : DA_IN_PROGRESS
DA_RET  : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:07
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:    11.00.11 00-00-00 RM-1035
IMEI:  357824061398527
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :  IJ
Product code:  059W056
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Phone disconected!

Connect phone on selected interface...

syed tuqeer 07-27-2017 10:52
Nokia 220 Write Firmware Done :)
 
Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-969_ROM_eMP_20.14.11
VIVA : RM-969_VIVA_eMP_20.14.11
LANG : RM-969_LANG_PACK_ROM_IJ_eMP_20.14.11_001
CUST : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.14.11_001
JMPT : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_20.14.11_001
 - > MODE : FullFlash
Software Info:    10.03.11 00-00-00 RM-969
IMEI:  353050068750924
PPM version :  IJ
Product code:  059V2L3
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 94 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : F3957A5AFE72C3323C1859731750F34D
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_AUTH  : Passed!
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
SecureDecrypt : RM-969_ROM_eMP_20.14.11
SecureDecrypt : RM-969_VIVA_eMP_20.14.11
SecureDecrypt : RM-969_LANG_PACK_ROM_IJ_eMP_20.14.11_001
SecureDecrypt : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.14.11_001
SecureDecrypt : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_20.14.11_001
OVRLP : 000069B900000001
PHPID : Rivendell.10.03.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-969_ROM_eMP_20.14.11
Write : RM-969_LANG_PACK_ROM_IJ_eMP_20.14.11_001
Write : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.14.11_001
Write : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_20.14.11_001
Write : RM-969_VIVA_eMP_20.14.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-969_ROM_eMP_20.14.11
[VERIFY] DONE : RM-969_LANG_PACK_ROM_IJ_eMP_20.14.11_001
[VERIFY] DONE : RM-969_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.14.11_001
[VERIFY] DONE : RM-969_JUMP_TABLE_IJ_MEA_PK_eMP_20.14.11_001
[VERIFY] DONE : RM-969_VIVA_eMP_20.14.11
CODE_VERIFY : Ok
Will Upload FAT Image now
Write : RM-969_FATIMAGE_IJ_20.14.11
FAT Image Flash done!
FAT Verify Ok
Rebooting phone now

Flashing done!
Total flash time : 00:05:01
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:    20.14.11 00-00-00 RM-969
IMEI:  353050068750924
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :  IJ
Product code:  059V2L3
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Phone disconected!

Connect phone on selected interface...

syed tuqeer 07-27-2017 10:53
Nokia 130 Write Firmware Done :)
 
Code:
Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1035_ROM_eMP_11.00.11
VIVA : RM-1035_VIVA_eMP_11.00.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 94 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 8B7C2129C19EC0455FCD004ABC32B812
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_AUTH  : Passed!
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_11.00.11
SecureDecrypt : RM-1035_VIVA_eMP_11.00.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_11.00.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
Write : RM-1035_VIVA_eMP_11.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_11.00.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002
[VERIFY] DONE : RM-1035_VIVA_eMP_11.00.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET  : DA_IN_PROGRESS
DA_RET  : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:05
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:    11.00.11 00-00-00 RM-1035
IMEI:  351873076753602
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :  IJ
Product code:  059W037
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Reading Phone Info....
Software ver : 11.00.11 00-00-00 RM-1035
IMEI 1  :      351873076753602
IMEI 2  :      351873076753610
XappVer :      000008F2
Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM    :      IJ
CNT    :      CRYSTAL.11.00.11.p1
Product SN  :    A1AD9E6AU
Product code :    059W037
Base Prd.code:    059V7K4
Module code  :    0206095
Hardware info=======
HWID  : 3200
LCDVer: TPO
Lock info ===========
IMEI      : 351873076753602
IMEI spNet : 3A 15 78 03 67 57 63 20

Conf key    : 800000000004000B
Provider key : 2440700000000000
Country      : Finland
Operator    : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 

SimLock status : Ok
Security status : Ok

Done!

Phone disconected!

Connect phone on selected interface...


All times are GMT +1. The time now is 16:44.
Page 11 of 90 « First 8910 11 1213142161 Last »
Show 50 post(s) from this thread on one page


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.36228 seconds with 6 queries

SEO by vBSEO