|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
09-06-2018, 06:39
| #586 (permalink) |
| No Life Poster   Join Date: Jul 2009 Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718 Status: Offline Sonork: 100.1596539 QQ-2710826805 Thanks Meter: 2,247 | nokia 216 reset code done Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 701 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0001 BB_CPU_SN : A6355BDD3804872AAEBBCC2920FD256F BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... BROM/BL stage done MT626x : Reset User Code All done! Remove USB cable All Security Settings deactivated! Code set to default : 12345 Done! Connect phone on selected interface... |
 |
|
09-06-2018, 07:51
| #587 (permalink) |
| No Life Poster Join Date: Jul 2009 Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718 Status: Offline Sonork: 100.1596539 QQ-2710826805 Thanks Meter: 2,247 | Nokia 105ds reset code done Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 658 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0001 BB_CPU_SN : 5E99400C13BA0DE2F68A1A11507B2EA3 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... BROM/BL stage done MT626x : Reset User Code All done! Remove USB cable All Security Settings deactivated! Code set to default : 12345 Done! Connect phone on selected interface... |
| |
|
09-06-2018, 12:06
| #588 (permalink) |
| No Life Poster Join Date: Apr 2011 Location: algerie Age: 54
Posts: 2,501
Member: 1562854 Status: Offline Sonork: 1245 Thanks Meter: 259 | Rm-974 flash done Dead mode is selected , no phone in normal mode found 1. Press and hold "Volume Down" 2. Insert USB cable 3. Hold button until phone will be detected Device boot not done Check Drivers, battery charge Try again in Dead mode Core : v2.29 , WP10x FlashEngine : v3.2 FFU : RM974_02040.00021.15235.50005_RETAIL_prod_signed_1 067_0269E5_000-FR.ffu Checking FFU file, wait... FFU Revision ID : 2.0 FFU Model ID : Nokia.MSM8926.P6112 FFU RootKeyHash : 0000000000000000000000000000000000000000 FFU Languages : Portuguese(Brazil) , Russian , Belorusian , fr-ca , Indonesian , Korean , Polish , Ukrainian , Uzbekistan(Latin) , Catalan , Swedish , Bulgarian , Japanese , Spanish , English (UK) , Czech , Latvian , Slovak , Chinese , sr-latn-rs , af-za , Hindi (India) , gl-es , Turkish , Thai , Italian , Danish (Denmark) , ha-latn-ng , Slovenian , Malay (Malaysia) , Lithuanian , Persian (Iran) , Kazakh , Romanian , English , eu-es , Estonian , Filipino (Philippines) , Greek , Norwegian (Bokmal , Norway) , Finnish , Vietnamese , Arabic , Croatian , Portuguese(Portugal) , Chinese(Taiwan) , Macedonian , Hungarian , Spanish(Mexico) , Azerbaijan(Latin) , German , Albanian , Dutch (Netherlands) , French , Hwbre (Israel) , FFU ChipSectors : 15155200 FFU Header : 0x000E0000 FFU Payload : 0x6A560000 FFU FastVerify : Ok Waiting for phone... Dead mode is selected , no phone in normal mode found 1. Press and hold "Volume Down" 2. Insert USB cable 3. Hold button until phone will be detected Device catched in BOOT mode! Boot Mode confirmed! Setting Preloder Collect Info... Setting Application Setting Secure Collect Info... === Nokia Flash App info : Protocol Version : 2.34 Protocol Implementation : 2.57 === Phone Initial info : Phone RMxxx ID : RM-974 Phone Model ID : Nokia.MSM8926.P6112.1.1 Phone Model PC : 059W022 Phone IMEI : 357163061782699 === eMMC info : eMMC Vendor : Hynix eMMC CID : 0090 eMMC Size : 7456 MiB === Security Initial info : Security Status : 010100000101 Secure Boot : Enabled Secure eFUSE : Enabled JTAG : Disabled RDC Key : Not Present (Retail) UEFI SBoot : Enabled SecHW Key : Exists Device RootKey : B2F6BECAAED8735388C21591177EDEBE44E5D762 === Other info : SD present : False Full Check skipped , will be checked by ImageSignature Battery Level : 99% RPMB Provision Status Code : 0x0101 Device RAM size : 512 MiB Device not have ATRP Backup to RAM Ok! FFU : RM974_02040.00021.15235.50005_RETAIL_prod_signed_1 067_0269E5_000-FR.ffu Flashing FFU Sending FFU Header CertData Header sent , accepted  Perform Data Partition Erase Erase done Sending FFU Payload Data... Finishing flashing Flashing done! Green Light Image Sent, processing PostFlash FinalConfig : abnormal status, error code : 0xFF7B0000 Make Factory Set : Ok Restore RAMBkp : Ok Update NVI from Image Ok , NVI will be updated on first boot! PostFlash Finished Total flash time : 00:06:57 Rebooting Connect phone on selected interface... |
| |
|
09-06-2018, 14:57
| #589 (permalink) |
| No Life Poster  Join Date: Nov 2016 Location: ISI
Posts: 5,792
Member: 2644066 Status: Offline Thanks Meter: 1,773 |  Nokia 130 blinking done by best Wait for phone... Phone found! [ 21 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : D4EBCB2689AEBDFDDFD2F895D85BEE4F BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : CRYSTAL.11.00.11.p1 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Crystal.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_AUTH : Passed! DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV [0] : FLASH_DIE : 00EF 0040 0016 0000 [0] : FLASH_LEN : 0x00400000 FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 Executing FFS FORMAT now... FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Elapsed: 00:00:33 Br ShahiD |
| |
| The Following User Says Thank You to A.G.Shahid For This Useful Post: |
|
09-07-2018, 07:27
| #590 (permalink) |
| No Life Poster  Join Date: Jan 2009 Location: Sindh Pakistan
Posts: 8,876
Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,424 | Nokia 216 --- Insert USB cable now! --- Wait for phone... Phone found! [ 407 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : 4FA854C52015F9F0A4530256B2FCD338 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : SUEZ.40.00.11.p1 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Suez.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_AUTH : Passed! DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW [0] : FLASH_DIE : 00EF 0060 0018 0000 [0] : FLASH_LEN : 0x01000000 FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000 Executing FFS FORMAT now... FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Elapsed: 00:01:00 |
| |
| The Following User Says Thank You to Akhtar Ali Jatt For This Useful Post: |
|
09-07-2018, 12:12
| #591 (permalink) |
| Product Supporter   Join Date: Jun 2014 Location: India
Posts: 5,063
Member: 2211790 Status: Offline Thanks Meter: 5,118 | Nokia 3.1 TA-1070 Factory File Flashing Done with Best2 1.04 Identify Code: Operation : Identify [ v1.04 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM44)
MODE : BOOTROM
PORT : 44
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : DSLevel : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia_All_InOne_DA_v01.2018.0707
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]
EMMC: 150100475836424D420325E868FF65A3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GX6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 7008CBD7339E17597DA68213B08B264
DA : USB : FULL-SPEED
Boot done!
--- SysInfoSub :
Patch Level : O00623
Display ID : 00WW_0_46E
Ver. CodeName : REL
Ver. Release : 8.0.0
Sec. Patch : 2018-07-05
Build Time : 1530585060
Product Model : ES2
Product Brand : alps
Product Name : ES2_00WW_FIH
Product Device : ES2_sprout
Product Manfct : alps
Product Info : ES2
Board Platform : mt6750
--- SecuritySub :
IMEI[0] : 35xxxxxxxxx
IMEI[1] : 35xxxxxxxxx
NVRAM check : Passed!
Done!
Elapsed: 00:00:15
Reconnect Power/Cable! Code: Load : D:\Nokia\Nokia HMD\Nokia 3.1\ES2-046E-0-00WW-B02.nb0
Load Ok!
Operation : Write FW [ v1.04 ]
Setting : UserData preserve : False
Setting : Bootloader update : False
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM44)
MODE : BOOTROM
PORT : 44
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : DSLevel : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia_All_InOne_DA_v01.2018.0707
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]
EMMC: 150100475836424D420325E868FF65A3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GX6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 7008CBD7339E17597DA68213B08B264
DA : USB : FULL-SPEED
Boot done!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : HW verification passed!
Erase : 0x0000000000000000 : 0x0000000000BC8000
Erase : 0x0000000003BC8000 : 0x0000000004000000
Erase : 0x0000000009000000 : 0x0000000001000000
Erase : 0x000000000A300000 : 0x0000000000080000
Erase : 0x000000000A880000 : 0x0000000001E00000
Erase : 0x000000000C6A0000 : 0x0000000000500000
Erase : 0x000000000D4A0000 : 0x00000000C5360000
Erase : 0x00000000D3100000 : 0x0000000185700000
PMT Update : OK
Flashing now ...
PROCESS : PRELOADER
Unpack : ES2-0-046E-00WW-1-2-preloader_ES2.bin
Flash : ES2-0-046E-00WW-1-2-preloader_ES2.bin
Update bootloader backup copy ...
Update bootloader backup copy Ok!
PROCESS : LOGO
Unpack : ES2-0-046E-00WW-1-2-logo.bin
Flash : ES2-0-046E-00WW-1-2-logo.bin
PROCESS : SECRO
Unpack : ES2-0-046E-00WW-1-2-secro.img
Flash : ES2-0-046E-00WW-1-2-secro.img
PROCESS : MD1IMG_A
Unpack : ES2-0-046E-00WW-1-2-md1img.img
Flash : ES2-0-046E-00WW-1-2-md1img.img
PROCESS : MD1DSP_A
Unpack : ES2-0-046E-00WW-1-2-md1dsp.img
Flash : ES2-0-046E-00WW-1-2-md1dsp.img
PROCESS : MD1ARM7_A
Unpack : ES2-0-046E-00WW-1-2-md1arm7.img
Flash : ES2-0-046E-00WW-1-2-md1arm7.img
PROCESS : ODMDTBO_A
Unpack : ES2-0-046E-00WW-1-2-odmdtbo.img
Flash : ES2-0-046E-00WW-1-2-odmdtbo.img
PROCESS : LK_A
Unpack : ES2-0-046E-00WW-1-2-lk.img
Flash : ES2-0-046E-00WW-1-2-lk.img
PROCESS : BOOT_A
Unpack : ES2-0-046E-00WW-1-2-boot.img
Flash : ES2-0-046E-00WW-1-2-boot.img
PROCESS : TEE_A
Unpack : ES2-0-046E-00WW-1-2-tee.img
Flash : ES2-0-046E-00WW-1-2-tee.img
PROCESS : VENDOR_A
Unpack : ES2-0-046E-00WW-1-2-vendor.img
Flash : ES2-0-046E-00WW-1-2-vendor.img
PROCESS : SYSTEM_A
Unpack : ES2-0-046E-00WW-1-2-system.img
Flash : ES2-0-046E-00WW-1-2-system.img
PROCESS : SYSTEM_B
Unpack : ES2-0-046E-00WW-1-2-system_other.img
Flash : ES2-0-046E-00WW-1-2-system_other.img
PROCESS : USERDATA
Unpack : ES2-0-046E-00WW-1-2-userdata.img
Flash : ES2-0-046E-00WW-1-2-userdata.img
PMT Update : OK
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
Flashing finished!
Done!
Elapsed: 00:02:46
Reconnect Power/Cable! |
| |
| The Following 8 Users Say Thank You to kamal_singla For This Useful Post: |
|
09-08-2018, 08:18
| #592 (permalink) |
| No Life Poster  Join Date: Dec 2007 Location: PAKISTAN
Posts: 8,860
Member: 654997 Status: Offline Sonork: 1613804(Don't Spam Plz) Thanks Meter: 4,073 | Nokia 105 reset user code Done :) Code: Connect phone on selected interface... Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 25 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0001 BB_CPU_SN : 9201EF9FCE8CA207DCDADF478EFD64FF BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... BROM/BL stage done MT626x : Reset User Code All done! Remove USB cable All Security Settings deactivated! Code set to default : 12345 Done! Connect phone on selected interface... |
| |
| The Following User Says Thank You to syed tuqeer For This Useful Post: |
|
09-09-2018, 07:39
| #593 (permalink) |
| No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan
Posts: 8,876
Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,424 | Nokia 105 2017 --- Insert USB cable now! --- Wait for phone... Phone found! [ 421 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0001 BB_CPU_SN : 0B4736D1B5C2894764DA4992CEA3F6A3 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... BROM/BL stage done MT626x : Reset User Code All done! Remove USB cable All Security Settings deactivated! Code set to default : 12345 Done! Connect phone on selected interface... |
| |
| The Following User Says Thank You to Akhtar Ali Jatt For This Useful Post: |
|
09-09-2018, 08:49
| #594 (permalink) |
| No Life Poster Join Date: Jul 2009 Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718 Status: Offline Sonork: 100.1596539 QQ-2710826805 Thanks Meter: 2,247 | Nokia 206 only vibrate done with best dongle Card found: S/N : 76BE6862 , v0122 Registered to: Nadeem Waris Connect phone on selected interface... Core : v2.29 , BB5XG FlashEngine : v10.5 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : CNT : rm872__04.52.image_m2_059Q4J7 Flashing phone now... [Gen] Rules accepted for : XGOLD Generation Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... -> If Windows say "Unrecognized device" / Operation not start -> Or if Phone start charge - just reinsert battery -> If flashing freeze - reinsert cable/battery and try again --- Press phone's power button or insert usb cable! --- Connection opened successfully IF Boot Init : 0xF0 IF Resp Len : 0x0A IF xCPUID : XGOLD 213 [XMM2130 QUANTUM] IF Resp Data : 1FB300020303010100FF Sending EBL Loader ... EBL Loader Ok, 01 EBL Loader ready, AA Sending EBL ... EBL sent Ok EBL : Quantum_Bootloader_10.53_M1S1 Speed accepted, use 6.500.000 FLASHID : 89008289 FLIC conf set, RST set Boot done! Check keys... Check done. Image can be flashed Backup enabled, will read all certificates Reading CCC Reading HWC Reading NPC IMEI 1 : 355944051123560 IMEI 2 : 355944051123578 PCcode : 059Q4L5 NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : C:\InfinityBox\BEST\Backup\Cert\355944051123560_XG 213_CRT.rpl Settings : EDM [0x8] , Block Mode , Fast CRC , Verify ===Flashing [CNT]=== File : rm872__04.52.image_m2_059Q4J7 Image : package_m2_059Q4J7.image.fls Sec-pack found, sending ... Sec-pack sent Found 2 region(s) Processing Region 1/2 Erase , Start : 0x42100000 , Len : 0x01D20000 Erasing, wait ... Erase done, time : 00:04:01 Write , Start : 0x42100000 , Len : 0x01040000 Flashing , wait ... Region flash done, time : 00:00:24 Processing Region 2/2 Erase , Start : 0x43E60000 , Len : 0x000E0000 Erasing, wait ... Erase done, time : 00:00:07 No write data, skip CRC check passed , 0x5521 Flashing done! Total flash time : 00:04:33 Reboot phone now... Reading Phone Info.... Connected phone - 206 Software Info: V 03.59 24-12-12 RM-872 (c) Nokia IMEI: 355944051123560 PPM version : V 03.59 24-12-12 RM-872 (c) Nokia MH2 Product code: 059Q4L5 Wait, when phone will be ready ... Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Processing After Flash Defaults... FullFactorySet... Ok! UserDataDefaultsSet...OK! ServiceDefaultsSet... Ok! LeaveDefaultsSet... Ok! ProductTuneSet...OK! SwUpgradeSet...OK! Check and Upload User Certificates ... Total - 58 certs Certificates found, skip upload ... AfterFlash operations done ;D Done! Connect phone on selected interface... Elapsed: 00:05:27 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
| |
| The Following User Says Thank You to Nadeem Waris For This Useful Post: |
|
09-11-2018, 11:22
| #595 (permalink) |
| Freak Poster  Join Date: Apr 2010
Posts: 238
Member: 1280685 Status: Offline Thanks Meter: 59 |  Nokia 5 TA-1053 Password Reset Settings: Code: Operation : Reset Settings [ v1.04 ] 1. Power Off Phone , Remove battery , Insert back 2. Use BOOT JIG or EDL cable! 3. Insert USB cable, press "POWER_ON" button few times, if need Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 430 [MSM8937] ID_BLOCK_S : E76E67F1 ID_BLOCK_I : 0004F0E1 ID_BLOCK_L : CFCB2E100C88C6436A874058DE9D40B2 ID_BLOCK_L : 7E4225A7AD4EEAA5C79A50CB66F2032C Use BEST Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] ExtInfo : 0x00004000/00004000/00001000/00001000/00000200 Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2 Boot Ok! Format USER ... Format CACHE ... Format Ok! Remove FRP Reset Ok! When you will see ANDROID on screen make next steps : 1. Press and Hold both 'Vol_UP' and 'Power_On' keys 2. Hold them until device will reboot and show again ANDROID logo 3. Release 'Power_On' button, wait when color circle appear on screen! Done! Elapsed: 00:00:27 |
| |
| The Following User Says Thank You to @ndoy For This Useful Post: |
|
09-11-2018, 15:30
| #596 (permalink) |
| No Life Poster Join Date: Nov 2016 Location: ISI
Posts: 5,792
Member: 2644066 Status: Offline Thanks Meter: 1,773 | Nokia 216 reset password done by best Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 11 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : 1ADBB077E8C0F8C0887D00252C59766B BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : SUEZ.12.00.11.p1 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Suez.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_AUTH : Passed! DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW [0] : FLASH_DIE : 00EF 0060 0018 0000 [0] : FLASH_LEN : 0x01000000 FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000 Executing FFS FORMAT now... FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Elapsed: 00:00:32 |
| |
| The Following User Says Thank You to A.G.Shahid For This Useful Post: |
|
09-11-2018, 17:35
| #597 (permalink) |
| No Life Poster  Join Date: Apr 2014 Location: B A N G L A D E S H
Posts: 1,341
Member: 2171294 Status: Offline Sonork: 100.1659207(No More Use) Thanks Meter: 706  |  Nokia 6(TA-1000) FRP/Security Repair & Firmware Read Done Info: Code: Operation : Identify [ v1.04 ] 1. Power Off Phone , Remove battery , Insert back 2. Use BOOT JIG or EDL cable! 3. Insert USB cable, press "POWER_ON" button few times, if need Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 430 [MSM8937] ID_BLOCK_S : 65EFAFE9 ID_BLOCK_I : 0004F0E1 ID_BLOCK_L : C7C336180480BE4B629F3850A68558BA ID_BLOCK_L : F1C3A4282CC16B2A401BD34AE7759CAB Use BEST Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x00004000/00004000/00001000/00001000/00000200 Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HCG8a4 Boot Ok! Brand : Nokia ProdName : TA-1000_00WW ProdModel : TA-1000 Device : D1C Dev Build : TA-1000_00WW-user 7.1.1 NMF26F 00CN_3_17B release-keys Dev CPU : MSM8937 Dev SKU : 600WW SKU Vendor: NOKIA SKU Locale: Worldwide SKU Carier: FIH Generic FXCN_SW : D1C-317B-0-00WW-A0 USERData : BINARY ( ENCRYPTED ) FRP State : ON ( ACTIVE ) Done! Elapsed: 00:00:11 Reconnect Power/Cable! Read Firmware: Code: Operation : Read Flash [ v1.04 ] 1. Power Off Phone , Remove battery , Insert back 2. Use BOOT JIG or EDL cable! 3. Insert USB cable, press "POWER_ON" button few times, if need Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 430 [MSM8937] ID_BLOCK_S : 65EFAFE9 ID_BLOCK_I : 0004F0E1 ID_BLOCK_L : C7C336180480BE4B629F3850A68558BA ID_BLOCK_L : F1C3A4282CC16B2A401BD34AE7759CAB Use BEST Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x00004000/00004000/00001000/00001000/00000200 Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HCG8a4 Boot Ok! Brand : Nokia ProdName : TA-1000_00WW ProdModel : TA-1000 Device : D1C Dev Build : TA-1000_00WW-user 7.1.1 NMF26F 00CN_3_17B release-keys Dev CPU : MSM8937 Dev SKU : 600WW SKU Vendor: NOKIA SKU Locale: Worldwide SKU Carier: FIH Generic Intenal SW version : SLOT A : D1C-317B-0-00WW-A0 DevInfo : Nokia__TA-1000_00WW__D1C__600WW_D1C-317B-0-00WW-A0 Reading Flash Content ... [Read Ok] : gpt_main0.bin [Read Ok] : NON-HLOS.bin [Read Ok] : sbl1.mbn [Read Ok] : sbl1.mbn [Read Ok] : rpm.mbn [Read Ok] : tz.mbn [Read Ok] : devcfg.mbn [Read Ok] : adspso.bin [Read Ok] : sec.dat [Read Ok] : splash.img [Read Ok] : emmc_appsboot.mbn [Read Ok] : emmc_appsboot.mbn [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : def_npreset.mbn [Read Ok] : hwconf.cfg [Read Ok] : sysinfo.cfg [Read Ok] : splashm.img [Read Ok] : hidden.img [Read Ok] : cda.img [Read Ok] : persist.img [Read Ok] : misc.img [Read Ok] : mdtp.img [Read Ok] : cmnlib.mbn [Read Ok] : cmnlib64.mbn [Read Ok] : keymaster.mbn [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [Read Ok] : gpt_backup0.bin Android Info saved! Read finished! Configuration : Nokia MSM8937 / eMMC Firmware Size : 4301 MiB Done! Elapsed: 00:09:03 Reconnect Power/Cable! Backup Security: Code: Operation : Backup Security [ v1.04 ] 1. Power Off Phone , Remove battery , Insert back 2. Use BOOT JIG or EDL cable! 3. Insert USB cable, press "POWER_ON" button few times, if need Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 430 [MSM8937] ID_BLOCK_S : 65EFAFE9 ID_BLOCK_I : 0004F0E1 ID_BLOCK_L : C7C336180480BE4B629F3850A68558BA ID_BLOCK_L : F1C3A4282CC16B2A401BD34AE7759CAB Use BEST Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x00004000/00004000/00001000/00001000/00000200 Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HCG8a4 Boot Ok! Security backup saved to : 0004F0E1_65EFAFE9_CLSEC.simg Done! Elapsed: 00:00:25 Reconnect Power/Cable! FRP Reset: Code: Operation : Reset Settings [ v1.04 ] 1. Power Off Phone , Remove battery , Insert back 2. Use BOOT JIG or EDL cable! 3. Insert USB cable, press "POWER_ON" button few times, if need Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 430 [MSM8937] ID_BLOCK_S : 65EFAFE9 ID_BLOCK_I : 0004F0E1 ID_BLOCK_L : C7C336180480BE4B629F3850A68558BA ID_BLOCK_L : F1C3A4282CC16B2A401BD34AE7759CAB Use BEST Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x00004000/00004000/00001000/00001000/00000200 Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HCG8a4 Boot Ok! Format USER ... Format CACHE ... Format Ok! Remove FRP Reset Ok! When you will see ANDROID on screen make next steps : 1. Press and Hold both 'Vol_UP' and 'Power_On' keys 2. Hold them until device will reboot and show again ANDROID logo 3. Release 'Power_On' button, wait when color circle appear on screen! Done! Elapsed: 00:00:21 Reconnect Power/Cable! PHP Code:  |
| |
| The Following 2 Users Say Thank You to tapas770 For This Useful Post: |
|
09-12-2018, 07:14
| #598 (permalink) |
| No Life Poster Join Date: Jul 2009 Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718 Status: Offline Sonork: 100.1596539 QQ-2710826805 Thanks Meter: 2,247 | NOkia 222 reset code done Connect phone on selected interface... Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 658 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : 6459EE824A0D53BB4F9602FF94152FBF BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... BROM/BL stage done MT626x : Reset User Code All done! Remove USB cable All Security Settings deactivated! Code set to default : 12345 Done! Connect phone on selected interface... |
| |
| The Following User Says Thank You to Nadeem Waris For This Useful Post: |
|
09-12-2018, 11:42
| #599 (permalink) |
| No Life Poster  Join Date: Feb 2005 Location: GSM WORLD
Posts: 2,079
Member: 118520 Status: Offline Thanks Meter: 3,551 | NOKIA-1 FRT TA-1066 AND:8.1.0 MT6735/MT6737M BRUSH FRP Done SUCCESSFULLY BRUSH FRP(NOKIA-1 FRT TA-1066 AND:8.1.0 MT6735/MT6737M)USB THANKS INFINITY-BOX TEAM |
| |
| The Following 2 Users Say Thank You to gracy_elec For This Useful Post: |
|
09-12-2018, 12:19
| #600 (permalink) |
| No Life Poster Join Date: Jul 2009 Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718 Status: Offline Sonork: 100.1596539 QQ-2710826805 Thanks Meter: 2,247 | Nokia 130 Contact Service Remove DOne Core : v2.29 , MTKx FlashEngine : v14.0 Verify files ... MAUI : RM-1035_ROM_eMP_11.00.11 VIVA : RM-1035_VIVA_eMP_11.00.11 LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002 CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002 JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002 - > MODE : FullFlash Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 658 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : 9D9E7D053D4408CDDBA2101D25500B4B BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : CRYSTAL.14.00.11.p1 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Crystal.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_AUTH : Passed! DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV [0] : FLASH_DIE : 00EF 0040 0016 0000 [0] : FLASH_LEN : 0x00400000 FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 SecureDecrypt : RM-1035_ROM_eMP_11.00.11 SecureDecrypt : RM-1035_VIVA_eMP_11.00.11 SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002 SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002 SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002 OVRLP : 000069B900000001 PHPID : CRYSTAL.14.00.11.p1 OVRLP : 00004DF900000001 DA : FORMAT_BIN Processing Flash Pre-format FILES : 5 SAFE_BLOCK : 04 FORMAT_BIN : Ok WRITE_STYLE : DEF : 0x01 (SEQ) Write : RM-1035_ROM_eMP_11.00.11 Write : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002 Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002 Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002 Write : RM-1035_VIVA_eMP_11.00.11 CODE_DNLOAD : Ok [VERIFY] DONE : RM-1035_ROM_eMP_11.00.11 [VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_VIVA_eMP_11.00.11 CODE_VERIFY : Ok Executing FFS FORMAT now... FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Rebooting phone now Flashing done! Total flash time : 00:01:02 Reboot phone Ok Connect phone on selected interface... |
| |
| The Following User Says Thank You to Nadeem Waris For This Useful Post: |
|
| Bookmarks |
| |
|
|
Linear Mode
