nokia 216 rm-1187 flashing problem - GSM-Forum

zeerik · 02-13-2021, 14:01

hi
set was hang on logo try to flash but flashing stop and set is now blinking every time project it error

2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 44 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 13A02EC4339ABF25A7270C97756C27C0
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent corrupted or damaged!
Connect phone on selected interface...

Boot Error
Flashing failed!
Connect phone on selected interface...

dmind956 · 02-13-2021, 14:13

hardware bro

not solved in flashing

shahzad.bhutta · 04-12-2022, 14:01

this is hardware problem

YellowBoss · 04-19-2022, 21:50

Quite often hang on logo means flash chip hardware fault.

02-13-2021, 14:01	#1 (permalink)
zeerik No Life Poster Join Date: May 2006 Location: Sambrial (Sialkot) Posts: 2,696 Member: 282066 Status: Offline Sonork: 100.1590696 Thanks Meter: 569	nokia 216 rm-1187 flashing problem hi set was hang on logo try to flash but flashing stop and set is now blinking every time project it error 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 44 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : 13A02EC4339ABF25A7270C97756C27C0 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent corrupted or damaged! Connect phone on selected interface... Boot Error Flashing failed! Connect phone on selected interface...

02-13-2021, 14:13	#2 (permalink)
dmind956 Freak Poster Join Date: May 2016 Location: india Posts: 132 Member: 2567334 Status: Offline Thanks Meter: 29	hardware bro not solved in flashing

04-12-2022, 14:01	#3 (permalink)
shahzad.bhutta Junior Member Join Date: Dec 2016 Location: Pakistan Posts: 13 Member: 2657080 Status: Offline Thanks Meter: 1	this is hardware problem

04-19-2022, 21:50	#4 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,472 Member: 1043909 Status: Offline Thanks Meter: 60,926	Quite often hang on logo means flash chip hardware fault.