GPGDragon Ver 3.37C **** Boom **** 14-12-2013 - GSM-Forum

Gsm.Universal · 12-14-2013, 09:40

GPGDragon Ver 3.37C **** Boom ****

Adjust Coolsand/RDA [Read Flash ]
Adjust Coolsaand/RDA CPU_ID 880A7000 CPU
Add Coolsand/RDA [ Format (beta) ]
Adjust SPD 6820/8810 Bin Flash File VMG Block Write
MTK 6582 Add Read Info/Read Flash/Format/IMEI Repair
Fix some bugs

Br
Gsm.Universal

more update on the way About MTK ANDRIOD And Many More click here
Mediafire Download
4Shared Download

Note:- Please only Use Thanks Buttn. not thanks post here

fazal khan1 · 12-14-2013, 09:59

plz add full sport mtk 6589 reed write .. mtk 6260 imei and mor

GPGDragon Help · 12-14-2013, 10:01

Quote:

Originally Posted by fazal khan1

plz add full sport mtk 6589 reed write .. mtk 6260 imei and mor

MTK 6260 IS SUPPORT
MTK 6589= MTK 6583
LIKE MTK 6515=MTK 6575
LIKE MTK 6513=MTK 6573

It was Support aleady!!!!!!!!!!

sneha · 12-14-2013, 10:05

after formate what about NV file ??? and what about no service problem ???

Gsm.Universal · 12-14-2013, 10:12

Quote:

Originally Posted by sneha

after formate what about NV file ??? and what about no service problem ???

use og flash file then no need nv file for no signal , no service

faizal313 · 12-14-2013, 10:14

Good to see u working hard for us..plz add adb backup we need it badly

Nothing is impossible for u GPG team....waiting for it in nxt update

GPGDragon Help · 12-14-2013, 10:14

Quote:

Originally Posted by sneha

after formate what about NV file ??? and what about no service problem ???

in this dragon update has say<add coolsand/rda format[beta]>

so do the format before please readback the flash file

if you mobile after format no IMEI you can write IMEI
if you mobile after format not service pleae write the backup or get the working file

sneha · 12-14-2013, 10:31

Quote:

Originally Posted by GPGDragon Help

in this dragon update has say<add coolsand/rda format[beta]>

so do the format before please readback the flash file

if you mobile after format no IMEI you can write IMEI
if you mobile after format not service pleae write the backup or get the working file

its stuck at formating and i unable to stop proces also

where wrong dont know guide me

GPGDragon Help · 12-14-2013, 10:33

Please made bigs pics,I can not see the logo

krishnadas.g · 12-14-2013, 10:39

is support spd 6530,31 imei writing?

sneha · 12-14-2013, 10:41

Quote:

Originally Posted by GPGDragon Help

Please made bigs pics,I can not see the logo

see here

formating stuck on near 85% and after few minuts wait i try to stop process but it not stop also

but its good set not dead and i done this set with another tool .

Tanha0321 · 12-14-2013, 10:45

3.37B SATUP ORROR
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:7,
Signal Pin:1, 3, 4, 5,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:4 D-:3
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM24
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
Error CODE:00--> CMD_EERPR --> TIMEOUT
3.36C

Code:

>>> Getting Mobile Connection Info...
    VCC Pin: 
    GND Pin:7,  
    Signal Pin:1, 3, 4, 5,  
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
    USB Pin Out: D+:4  D-:3 
    HardWare:VID:17_82 PID:4D_00  
    This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM24 
>>> Connecting Mobile...
    Mobile Connection Success...
    Mobile Firmware Version:SPRD3 
>>> Downloading First Boot...
>>> Mobile Info
    Project ID :Spreadtrum Boot Block version 1.1 
>>> Downloading Second Boot...
     Baud Rate is Switched To:921600 
    Flash ID:0000ECBC 
    Flash Size:20000000->512M 
    Flash Name:NAND_SamSungK9K4G16Q0M 
    CPU Name:6820/8810 
>>> -Analyzing Flash File...
    Detecting Flash File Format  : Factory Flash...
    Flash Size:0X116BE1CE->278M 
>>> Decompressing file...
    NV_ADD      :0x00039688  SIZE: 0x0000D1B0
    SPL_ADD     :0x00046838  SIZE: 0x00004200
    UBOOT_ADD   :0x0004AA38  SIZE: 0x00060FF8
    VMG_ADD     :0x000ABA30  SIZE: 0x0003D000
    MODEM_ADD   :0x000E8A30  SIZE: 0x003C1E10
    DSP_ADD     :0x004AA840  SIZE: 0x001E0000
    BOOT_IMG_ADD:0x0068A840  SIZE: 0x00693000
    REC_IMG_ADD :0x00D1D840  SIZE: 0x006B5000
    SYSTEM_ADD  :0x013D2840  SIZE: 0x0F4B1BC0
    USER_ADD    :0x10884400  SIZE: 0x00E12280
    BOOTLOGO_ADD:0x11696680  SIZE: 0x00013034
    Waiting For Your Confirmation...
>>> Writing Flash File...
    Write_SPL...
    Write_UBOOT...
    Write_VMG...
    Write_MODEM...
    Write_DSP...
    Write_BOOT_IMG...
    Write_REC_IMG...
    Write_SYSTEM...
>>> Return DATA Error!!!

THIS ERROR PLZ HELP ME

GPGDragon Help · 12-14-2013, 10:48

Quote:

Originally Posted by sneha

see here

formating stuck on near 85% and after few minuts wait i try to stop process but it not stop also

but its good set not dead and i done this set with another tool .

thanks,I think this is Bugs in the 880A7002 CPU
We are has test 8808**** 8809**** 8806****...and others done
will try go get one 880A CPU and test~!!!!

GPGDragon Help · 12-14-2013, 10:50

Quote:

Originally Posted by Tanha0321

3.37B SATUP ORROR
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:7,
Signal Pin:1, 3, 4, 5,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:4 D-:3
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM24
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
Error CODE:00--> CMD_EERPR --> TIMEOUT
3.36C

Code:

>>> Getting Mobile Connection Info...
    VCC Pin: 
    GND Pin:7,  
    Signal Pin:1, 3, 4, 5,  
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
    USB Pin Out: D+:4  D-:3 
    HardWare:VID:17_82 PID:4D_00  
    This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM24 
>>> Connecting Mobile...
    Mobile Connection Success...
    Mobile Firmware Version:SPRD3 
>>> Downloading First Boot...
>>> Mobile Info
    Project ID :Spreadtrum Boot Block version 1.1 
>>> Downloading Second Boot...
     Baud Rate is Switched To:921600 
    Flash ID:0000ECBC 
    Flash Size:20000000->512M 
    Flash Name:NAND_SamSungK9K4G16Q0M 
    CPU Name:6820/8810 
>>> -Analyzing Flash File...
    Detecting Flash File Format  : Factory Flash...
    Flash Size:0X116BE1CE->278M 
>>> Decompressing file...
    NV_ADD      :0x00039688  SIZE: 0x0000D1B0
    SPL_ADD     :0x00046838  SIZE: 0x00004200
    UBOOT_ADD   :0x0004AA38  SIZE: 0x00060FF8
    VMG_ADD     :0x000ABA30  SIZE: 0x0003D000
    MODEM_ADD   :0x000E8A30  SIZE: 0x003C1E10
    DSP_ADD     :0x004AA840  SIZE: 0x001E0000
    BOOT_IMG_ADD:0x0068A840  SIZE: 0x00693000
    REC_IMG_ADD :0x00D1D840  SIZE: 0x006B5000
    SYSTEM_ADD  :0x013D2840  SIZE: 0x0F4B1BC0
    USER_ADD    :0x10884400  SIZE: 0x00E12280
    BOOTLOGO_ADD:0x11696680  SIZE: 0x00013034
    Waiting For Your Confirmation...
>>> Writing Flash File...
    Write_SPL...
    Write_UBOOT...
    Write_VMG...
    Write_MODEM...
    Write_DSP...
    Write_BOOT_IMG...
    Write_REC_IMG...
    Write_SYSTEM...
>>> Return DATA Error!!!

THIS ERROR PLZ HELP ME

this I has solve one phone before

first,I click start ,after boot done,I untick all (NV\SPL\UBOOT\VMG\MODEM....)
and just tick the erase all
after click ok
now phone flash is empty

then I click start again

and tick the tick all(NV ALSO\UBOOT\VMG)
untick the erase flash
click ok
Mobile flash done,no any error come

then Mobile alive

Gsm.Universal · 12-14-2013, 11:02

Quote:

Originally Posted by krishnadas.g

is support spd 6530,31 imei writing?

already supported

look here

http://forum.gsmhosting.com/vbb/f646...-done-1731095/

12-14-2013, 09:40	#1 (permalink)
Gsm.Universal No Life Poster Join Date: Feb 2011 Location: Pakistan & UAE (Dubai) Age: 34 Posts: 3,011 Member: 1526738 Status: Offline Sonork: 100.1607644 Thanks Meter: 6,688	GPGDragon Ver 3.37C Boom 14-12-2013 GPGDragon Ver 3.37C ** Boom Adjust Coolsand/RDA [Read Flash ] Adjust Coolsaand/RDA CPU_ID 880A7000 CPU Add Coolsand/RDA [ Format (beta) ] Adjust SPD 6820/8810 Bin Flash File VMG Block Write MTK 6582 Add Read Info/Read Flash/Format/IMEI Repair Fix some bugs Br Gsm.Universal more update on the way About MTK ANDRIOD And Many More click here Mediafire Download 4Shared Download** Note:- Please only Use Thanks Buttn. not thanks post here Last edited by Gsm.Universal; 12-14-2013 at 10:05. Reason: add link

12-14-2013, 09:59	#2 (permalink)
fazal khan1 Freak Poster Join Date: Nov 2013 Posts: 157 Member: 2074204 Status: Offline Sonork: 100.1612437 Thanks Meter: 66	plz add full sport mtk 6589 reed write .. mtk 6260 imei and mor

12-14-2013, 10:05	#4 (permalink)
sneha No Life Poster Join Date: Aug 2006 Location: BHARAT Posts: 3,076 Member: 327043 Status: Offline Sonork: 100.1587811 Thanks Meter: 1,514	after formate what about NV file ??? and what about no service problem ???

12-14-2013, 10:14	#6 (permalink)
faizal313 Freak Poster Join Date: Apr 2009 Location: "CELL SOLUTION"...udupi Age: 38 Posts: 429 Member: 1019517 Status: Offline Sonork: 100.1614559 Thanks Meter: 102	Good to see u working hard for us..plz add adb backup we need it badly Nothing is impossible for u GPG team....waiting for it in nxt update

12-14-2013, 10:33	#9 (permalink)
GPGDragon Help No Life Poster Join Date: Oct 2010 Location: china Age: 35 Posts: 2,954 Member: 1428349 Status: Offline Sonork: 100.1597111 Thanks Meter: 13,139	Please made bigs pics,I can not see the logo

12-14-2013, 10:39	#10 (permalink)
krishnadas.g Freak Poster Join Date: Aug 2008 Location: india,kerala Posts: 193 Member: 836786 Status: Offline Sonork: 1,009 horrold Thanks Meter: 48	is support spd 6530,31 imei writing?