Help me "error" read dragon 6820
 

>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:7,
Signal Pin:1, 3, 4, 5,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:4 D-:3
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM41
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:115200
Flash ID:000098BC
Flash Size:20000000->512M
Flash Name:NAND_TOSHIBATYBC0A111236KC10
CPU Name:6820/8810
>>> Reading Flash...
Error:Receive Data 0x7E Error...
Error:Receive Data 0x7E Error...

see:

http://forum.gsmhosting.com/vbb/9582500-post3.html



Diosa

Thanks brow

but my device is MTK

vladicell

i have same problem with SPD 6820
>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:20,
Signal Pin:21, 22, 23, 24,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:22 D-:23
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM16
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:1843200
Flash ID:0000ADBC
Flash Size:20000000->512M
Flash Name:NAND_HYNIXH8BCS0UN0MCR
CPU Name:6820/8810
>>> Reading Flash...
Error:Receive Data 0x7E Error...
Error:Receive Data 0x7E Error...

LG X350 MTK 6236 error in "format"
 

Detecting COM PortCOM48
Mobile Connection Success...
CPU_ID:MT6236
Hardware Version:8A03
Software Version:8A00
Initialization RAM Error,FUNC boot_init_1
>>> Return DATA Error!!!