spd smart phone problem
 

First press bootkey of phone and then insert usb cable phone to computer in off condition.






Regards
amn32

put the phone in bootmode ... Drivers must be detected as SCIUSB2Serial
install proper drivers

But your Screenshot shows . the phone detectd DAIG Mode

yes i agree to you it seems this box cannot recognize spreadrum easily unlike other boxes i have a lot of spreadrum cpus encounter i return to the customer because of connection problem

Nothing is wrong with program .
1- Download Drivers frome here Download Spd android drivers lucky rar
2- Install all drivers
3-remove battery from phone .
4-insert battery to phone
5-now insert simple usb( Data ) cable in phone
6- Press boot key of phone ,which can be ,voldown, volup,camera button or home button of phone
7-insert other end of cable in computer
8- computer will ask for spd drivers or will install auto.
9-After finish drivers again remove cable from computer and go to start button ,press bootkey insert again cable to computer .
10- Avator will pick your phone very easily .
Note - if usb jack of phone is damaged , there is stain or cable is not good ,you can not detect your phone .

Try and post result.






Wbr
..:\\lucky//:..