mitsubishi m 320 (mt 560) - GSM-Forum

cossimon · 02-02-2004, 17:26

I can't connect with this mobile. I don't know what is goin on. I'm trying to read all the flash with F_download8m, and I can't connect to the phone. I tried to connect with ipltrium but it did'nt work either. I'm using this interface: truim datacable based on max232 with external supply which scheme is on this site: www.megasoft.org.ua/trium-datacable.
The pinouts :
from left to right, keybord up
1,2,3 short(together)
5 TX
6 RX
8 goes via 38kohm to GND
12,13,14,15 GND(together)
I don't know where the problem is.
Can anyone help me? Thx in advance.

DOUHAL · 02-02-2004, 17:38

big thinks for you COSSIMON

cossimon · 02-02-2004, 18:00

the datacable is ok of course, I've also tried to connect using flash mode and I gave 7th pin- 2k- to the gnd and the flashing didn't work.

george gsm · 06-08-2004, 21:05

hi cosimon,
i will check this software
try to use a resistor 33k+ 10k potentiometer. rotate and find optimal value.
regards,
geo.

02-02-2004, 17:26	#1 (permalink)
cossimon Junior Member Join Date: Jan 2004 Location: Europe Age: 43 Posts: 3 Member: 50992 Status: Offline Thanks Meter: 0	mitsubishi m 320 (mt 560) I can't connect with this mobile. I don't know what is goin on. I'm trying to read all the flash with F_download8m, and I can't connect to the phone. I tried to connect with ipltrium but it did'nt work either. I'm using this interface: truim datacable based on max232 with external supply which scheme is on this site: www.megasoft.org.ua/trium-datacable. The pinouts : from left to right, keybord up 1,2,3 short(together) 5 TX 6 RX 8 goes via 38kohm to GND 12,13,14,15 GND(together) I don't know where the problem is. Can anyone help me? Thx in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mitsubishi M320/MT 560 Unlock	PedroApollo	Mitsubishi	0	08-13-2004 16:25
Mitsubishi MT-560 Display	Kengsm	Wanted Products	0	08-29-2003 05:39
MT 560 unlock !?	Batgoy	Mitsubishi	4	07-24-2003 15:50
Buy Solution for Mt 560	gilsie	Wanted Products	1	06-24-2003 17:27
MT-560 Pinout	DaysGSM	Mitsubishi	0	01-22-2003 16:15

02-02-2004, 17:38	#2 (permalink)
DOUHAL No Life Poster Join Date: Nov 2003 Location: near you ... Posts: 2,947 Member: 43036 Status: Offline Sonork: 100.62160 Thanks Meter: 2,386	big thinks for you COSSIMON

02-02-2004, 18:00	#3 (permalink)
cossimon Junior Member Join Date: Jan 2004 Location: Europe Age: 43 Posts: 3 Member: 50992 Status: Offline Thanks Meter: 0	the datacable is ok of course, I've also tried to connect using flash mode and I gave 7th pin- 2k- to the gnd and the flashing didn't work.

06-08-2004, 21:05	#4 (permalink)
george gsm No Life Poster Join Date: Jul 2002 Location: Bucharest-Romania Age: 51 Posts: 1,160 Member: 14200 Status: Offline Sonork: Sonork id Thanks Meter: 117	hi cosimon, i will check this software try to use a resistor 33k+ 10k potentiometer. rotate and find optimal value. regards, geo.