i need E70 file
 

Picture is Same Same Nokia N70 (2sim)
Phone was on only have sms problem
i Reset with Dragon now Phone is Dead
here is logs


Chip=SpreadTrum
Action=ReadInfo
FlashType=NOR
boot=6600L/WT6226/6610/6620
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM47
Baudrate=921600

CPU_Type=SC6600L7A
CPU_ID=66007019
NOR_ID=0001227E223D2200
NOR_Size=64MB
NOR_Name=NOR_S29WS512P
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast...

+++++++++++++++++++End at: 10/24/2012 5:05:57 AM+++++++++++++++++++

-------------------Created: 10/24/2012 5:06:01 AM-------------------

Chip=SpreadTrum
Action=Format
FlashType=NOR
boot=6600L/WT6226/6610/6620
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM47
Baudrate=921600

CPU_Type=SC6600L7A
CPU_ID=66007019
NOR_ID=0001227E223D2200
NOR_Size=64MB
NOR_Name=NOR_S29WS512P
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast...
RXD=4 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600701900006A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7A Flash: NOR_S29WS512P
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
Failed to auto format.

+++++++++++++++++++End at: 10/24/2012 5:07:34 AM+++++++++++++++++++

-------------------Created: 10/24/2012 5:07:42 AM-------------------

Chip=SpreadTrum
Action=Reset
FlashType=NOR
boot=6600L/WT6226/6610/6620
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM47
Baudrate=921600

CPU_Type=SC6600L7A
CPU_ID=66007019
NOR_ID=0001227E223D2200
NOR_Size=64MB
NOR_Name=NOR_S29WS512P
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast...
RXD=4 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600701900006A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7A Flash: NOR_S29WS512P
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing File System...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.:cool:

here is Volcano link
http://forum.gsmhosting.com/vbb/f728...64-mb-1561138/