1st World Samsung SM-G925F Repair Done via UFS

[starkrimes]

1st World Samsung SM-G925F REPAIR DONE via UFS by the Giant Octoplus / Medusa PRO II


Phone wont accept any flash and stuck on Boot.img

LOG INFO :

Welcome to Medusa Pro Software version 2.0.9.  Started.
 Reader #0: FT SCR2000 0
 Reader #1: FT SCR2000 1
 Reader #2: FT SCR2000 2
 Reader #3: Generic Usb Smart Card Reader 0
 Reader #4: Generic Usb Smart Card Reader 1
 Reader #5: Generic Usb Smart Card Reader 3
 Loading firmware. Please wait...    Done.
 Selected UFS interface.
 

 Selected UFS BGA095 socket.
 Please use USB3.0 for better speed.
 Connected. Reading information.
 Manufacturer name: SAMSUNG
 Product name: KLUBG4G1BD-E0B1
 Serial Number: 7DF6B8E4670B0382
 OEM ID: SAMSUNG_OEM_ID
 Page size    : 4096 B
 Block size   : 4096 B
 Block count  : 7814144
 Size         : 29.81 GB (30524.00 MB)
 AttrRefClkFreeq = 1
 MaxDataInSize = 4096
 MaxDataOutSize = 4096
 Connect successful.
 ---------------------------------------------------------------
 

 Physical partition number: 0
 

 Block count  : 7810048 (0x772C00)
 Size         : 29.79 GB (30508.00 MB)
 

 Physical partition number: 1
 

 Block count  : 1024 (0x400)
 Size         : 4.00 MB
 

 Physical partition number: 2
 

 Block count  : 1024 (0x400)
 Size         : 4.00 MB
 

 ---------------------------------------------------------------Searching Android build info...
 Not found
 ---------------------------------------------------------------RPMB: Counter of the successful data write requests = 2.

LOG WRITTING PYSICAL PARTITIONS ( LUN 1 & 2 ) :

Opening F:/G925F/SAMSUNG_KLUBG4G1BD-E0B1_Phys_Part_1.bin file... Write data verification is enabled.
 Writing. Please wait... Done.
 Elapsed time 00:00:00 
 SW: 2.0.9; FW: 1.00.
 Opening F:/G925F/SAMSUNG_KLUBG4G1BD-E0B1_Phys_Part_2.bin file...
 Write data verification is enabled.
 Writing. Please wait... Done.
 Elapsed time 00:00:00 
 SW: 2.0.9; FW: 1.00.

LOG SMART REPAIR :

Repairing from file "F:/G925F/Samsung_SM-G925F_UFS_By_STARKRIMES.srf". Write data verification is enabled.
 

 Physical partition number: 0
 Writing GPT partition...    Done.
 

 Physical partition number: 0
 Writing BOTA0 partition...    Done.
 

 Physical partition number: 0
 Writing BOTA1 partition...    Done.
 

 Physical partition number: 0
 Writing EFS partition...    Done.
 

 Physical partition number: 0
 Writing PARAM partition...    Done.
 

 Physical partition number: 0
 Writing BOOT partition...    Done.
 

 Physical partition number: 0
 Writing RECOVERY partition...    Done.
 

 Physical partition number: 0
 Writing OTA partition...    Done.
 

 Physical partition number: 0
 Writing RADIO partition...    Done.
 

 Physical partition number: 0
 Writing TOMBSTONES partition...    Done.
 

 Physical partition number: 0
 Writing DNT partition...    Done.
 

 Physical partition number: 0
 Writing PERSISTENT partition...    Done.
 

 Physical partition number: 0
 Writing STEADY partition...    Done.
 

 Physical partition number: 0
 Writing PERSDATA partition...    Done.
 

 Physical partition number: 0
 Writing SBFS partition...    Done.
 

 Physical partition number: 0
 Writing HIDDEN partition...    Done.
 

 Smart Repair is successfully complete.
 SW: 2.0.9; FW: 1.00.
 Disconnected.

Download MEDUSA PRO II Software

Find out more at: https://medusabox.com/

Download Octoplus PRO JTAG Software

Find out more at: www.octoplusbox.com

[nour2014]

thanks bro for sharing with us and i have question plz ufs memories using boot configuritions like emmc or not ?

[blackchoc]

Boooom booom Boooom ..... The Medusa team should be proud of u ... Thank u for offering the experience ��