st23i eroor - GSM-Forum

tartcell18 · 12-03-2014, 06:56

Checking data...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 106030E1, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : Qualcomm MSM7227A
Core ID : 106030E1
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.

Octopus box · 12-03-2014, 08:33

Hello.

To Repair the device, do the next steps:

1. Check soldering of all Jtag wires, make them as short as possible (max. 3-5 CM lenght).
2. Select repairing type ("Phone Repair (Dead Boot Repair + Security Recalculation)") in EasyRepair Mode wizard and press "Next" button.
3. Connect Jtag connector with soldered wires to Medusa Box.
4. Connect the USB cable to the phone (USB cable should be connected only to motherboard USB port, don't use any USB hubs or USB PCI cards).

Try to perform these steps a few times. Try on another PC. Try to connect fully cherge battery also.

Also, please lokk here:
http://forum.gsmhosting.com/vbb/f664...-help-1778396/,
http://forum.gsmhosting.com/vbb/f664...olved-1766013/,
http://forum.gsmhosting.com/vbb/f664...edusa-1768373/,
http://forum.gsmhosting.com/vbb/10008283-post1.html.

And look here video manual: http://forum.gsmhosting.com/vbb/9910314-post1.html

12-03-2014, 06:56	#1 (permalink)
tartcell18 No Life Poster Join Date: Jun 2011 Location: manila Posts: 1,169 Member: 1595088 Status: Offline Thanks Meter: 184	st23i eroor Checking data... Resetting target. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S64 revision C. Detected TAP ID: 106030E1, IR Length = 4. JTAG speed : 1000 KHz. VREF level : 1.80 V CPU : Qualcomm MSM7227A Core ID : 106030E1 ERROR[008]: Unknown flash device. Device No:ID = 0:00000000. ERROR[035]: Target device has been powered off during connect.

12-03-2014, 08:33	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,989 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,434	Hello. To Repair the device, do the next steps: 1. Check soldering of all Jtag wires, make them as short as possible (max. 3-5 CM lenght). 2. Select repairing type ("Phone Repair (Dead Boot Repair + Security Recalculation)") in EasyRepair Mode wizard and press "Next" button. 3. Connect Jtag connector with soldered wires to Medusa Box. 4. Connect the USB cable to the phone (USB cable should be connected only to motherboard USB port, don't use any USB hubs or USB PCI cards). Try to perform these steps a few times. Try on another PC. Try to connect fully cherge battery also. Also, please lokk here: http://forum.gsmhosting.com/vbb/f664...-help-1778396/, http://forum.gsmhosting.com/vbb/f664...olved-1766013/, http://forum.gsmhosting.com/vbb/f664...edusa-1768373/, http://forum.gsmhosting.com/vbb/10008283-post1.html. And look here video manual: http://forum.gsmhosting.com/vbb/9910314-post1.html