GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Medusa (https://forum.gsmhosting.com/vbb/f664/)
-   -   Can not open program Medusa Pro [Solved] (https://forum.gsmhosting.com/vbb/f664/can-not-open-program-medusa-pro-solved-2452243/)

matufo 08-15-2018 15:54
Can not open program Medusa Pro [Solved]
 
i was trying repair boot of g532m samsung, so cant read data of phone, i check connections and try again, then program read emmc correctly, but after a 20 second appear a message "smart card not found", then update smartcard, update program medusa to 1.6.5 and try again, when i try to open program, i can't do it, and a message appear

Smart-Card: card blacklisted
#0: 00000000

iI need to repair the phone, because I turn it off by removing frp

sorry for my english, i speak spanish

Medusa Box 08-15-2018 19:09
Hello.

Quote:
appear a message "smart card not found"
Such error (with card) may appear, if there is no enough powering on USB port, where You have connected Box or there is a problem with eMMC connection - present shorts on PCB or soldered wires are too long. Please disconnect all devices from PC, reboot PC, connect Box directly to PC motherboard USB port (don't use any USB hubs, this is important for stable connection), re-update card and try to run Software again. When Software will start, check shorts on PCB, check soldering of all wires, make each wire as short as possible (max. 3-5 CM length) and try to connect the devcie again.

matufo 08-15-2018 21:52
Quote:
Originally Posted by Medusa Box (Post 13270511)
Hello.


Such error (with card) may appear, if there is no enough powering on USB port, where You have connected Box or there is a problem with eMMC connection - present shorts on PCB or soldered wires are too long. Please disconnect all devices from PC, reboot PC, connect Box directly to PC motherboard USB port (don't use any USB hubs, this is important for stable connection), re-update card and try to run Software again. When Software will start, check shorts on PCB, check soldering of all wires, make each wire as short as possible (max. 3-5 CM length) and try to connect the devcie again.
was cable, sry and thanks for support


All times are GMT +1. The time now is 10:52.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.07572 seconds with 6 queries

SEO by vBSEO