Quote:
|
Quote:
|
Pleas help my medusa after update 2.0..6 usb connect via edl mode not working i am conect devices 9008 edl mode and i am mak conenect but box still conect nothing conect i am downgrad but nothing working |
Welcome to Medusa Pro Software version 2.0.3. Started. Reader #0: Alcor Micro USB Smart Card Reader 0 Reader #1: FT SCR2000 0 Reader #2: FT SCR2000 1 Reader #3: FT SCR2000 2 Reader #4: FT SCR2000 3 SRF "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/ZTE_N9560_EMMC.srf" has been installed successfully. SRF "E:/firmwareFolder/ZTE_N9560_USB.srf" has been installed successfully. Model Settings: Interface : USB Brand : ZTE Model : N9560 SRF : E:/firmwareFolder/ZTE_N9560_USB.srf Core : Qualcomm MSM8940 Loader : QLoader_v4_ZTE Connecting... Cancelled. Model Settings: Interface : USB Brand : ZTE Model : N9560 SRF : E:/firmwareFolder/ZTE_N9560_USB.srf Core : Qualcomm MSM8940 Loader : QLoader_v4_ZTE Connecting... Cancelled. |
i need srf fill for ASUS A002A V570KL WIFI AND NETWORK NOT WORKING Model Settings: Interface : USB Core : Auto Detect UFS Loader : Connecting... Finished calculating Searching loader... Loader found: Core : Qualcomm MSM8996 Loader : QLoader_MSM8996_UFS_V14_Asus Sending loader...OK. Loader successfully initialized. INFO: Device Total Logical Blocks: 0x1c91000 INFO: Device Block Size in Bytes: 0x1000 INFO: Device Total Physical Partitions: 0x0 INFO: Device Manufacturer ID: 0x1ce INFO: Device Serial Number: 0x4d53554e INFO: {"storage_info": {"total_blocks":29954048, "block_size":4096, "page_size":4096, "num_physical":6, "manufacturer_id":462, "serial_num":1297306958, "fw_version":"700","mem_type":"UFS","prod_name":"K LUDG8J1CB-B0B1"}} UFS fInitialized: 0x1 UFS Current LUN Number: = 0xd0 UFS Total Active LU: 0x6 UFS wManufacturerID: 0x1ce UFS Boot Partition Enabled: 0x1 UFS Raw Device Capacity: = 0xee60000 UFS Min Block Size: 0x8 UFS Erase Block Size: 0x2000 UFS Allocation Unit Size: 0x1 UFS RPMB ReadWrite Size: = 0x20 UFS Number of Allocation Uint for This LU: 0x0 UFS Logical Block Size: 0x0 UFS Provisioning Type: 0x0 UFS LU Write Protect: 0x0 UFS Boot LUN ID: = 0x0 UFS Memory Type: 0x0 UFS LU Total Blocks: 0x0 UFS Supported Memory Types: 0x800f UFS dEnhanced1MaxNAllocU: 0x7730 UFS wEnhanced1CapAdjFac: 0x200 UFS dEnhanced2MaxNAllocU: = 0x0 UFS wEnhanced2CapAdjFac: 0x200 UFS dEnhanced3MaxNAllocU: 0x0 UFS wEnhanced3CapAdjFac: 0x200 UFS dEnhanced4MaxNAllocU: 0x0 UFS wEnhanced4CapAdjFac: 0x0 UFS LUN Enable Bitmask: 0x3f UFS Logical Block Count: 0x0 UFS bConfigDescrLock: 0x0 UFS iManufacturerName String Index: 0x0 UFS iProductName String Index: 0x1 UFS iSerialNumber String Index: 0x2 UFS iOemID String Index: 0x3 UFS Inquiry Command Output: SAMSUNG KLUDG8J1CB-B0B1 0700 ACK Device : SAMSUNG KLUDG8J1CB-B0B1 0700 Core : Auto Detect UFS Page size : 4096 B Block size : 4096 B Block count : 31242240 Size : 119.18 GB (122040.00 MB) Connect successful. --------------------------------------------------------------- SW: 2.0.6; FW: 1.24. Physical partition number: 0 Block count : 29954048 (0x1C91000) Size : 114.27 GB (117008.00 MB) P00: GPT (00000000, 00000006) 24 KB P01: ssd (00000006, 00000002) 8 KB P02: persist (00000008, 00002000) 32 MB P03: misc (00002008, 00000100) 1024 KB P04: keystore (00002108, 00000080) 512 KB P05: devcfg (00002188, 00000020) 128 KB P06: devcfgbak (000021A8, 00000020) 128 KB P07: frp (000021C8, 00000080) 512 KB P08: metadata (00002248, 00002000) 32 MB P09: abootu (00004248, 00000001) 4 KB P10: priv (00004249, 00000080) 512 KB P11: asdf (000042C9, 00002000) 32 MB P12: cache (000062C9, 00080000) 2048 MB P13: quality (000862C9, 00001000) 16 MB P14: userdata (000872C9, 01C09D16) 112.2 GB Physical partition number: 1 Block count : 1024 (0x400) Size : 4.00 MB P00: GPT (00000000, 00000006) 24 KB P01: xbl (00000006, 000003D9) 3940 KB Physical partition number: 2 Block count : 1024 (0x400) Size : 4.00 MB P00: GPT (00000000, 00000006) 24 KB P01: xblbak (00000006, 000003D9) 3940 KB Physical partition number: 3 Block count : 32768 (0x8000) Size : 128.00 MB P00: GPT (00000000, 00000006) 24 KB P01: reserve (00000006, 00000008) 32 KB P02: cdt (0000000E, 00000001) 4 KB P03: ddr (0000000F, 00007FD0) 127.8 MB Physical partition number: 4 Block count : 1245184 (0x130000) Size : 4.75 GB (4864.00 MB) P00: GPT (00000000, 00000006) 24 KB P01: rpm (00000006, 00000080) 512 KB P02: rpmbak (00000086, 00000080) 512 KB P03: tz (00000106, 00000200) 2048 KB P04: tzbak (00000306, 00000200) 2048 KB P05: hyp (00000506, 00000080) 512 KB P06: hypbak (00000586, 00000080) 512 KB P07: sec (00000606, 00000004) 16 KB P08: pmic (0000060A, 00000080) 512 KB P09: pmicbak (0000068A, 00000080) 512 KB P10: modem (0000070A, 00005F00) 95 MB P11: dsp (0000660A, 00001000) 16 MB P12: dip (0000760A, 00000100) 1024 KB P13: mdtp (0000770A, 00002000) 32 MB P14: aboot (0000970A, 00000380) 3584 KB P15: abootbak (00009A8A, 00000380) 3584 KB P16: devinfo (00009E0A, 00000100) 1024 KB P17: bluetooth (00009F0A, 00000100) 1024 KB P18: keymaster (0000A00A, 00000080) 512 KB P19: keymasterbak (0000A08A, 00000080) 512 KB P20: cmnlib (0000A10A, 00000040) 256 KB P21: cmnlibbak (0000A14A, 00000040) 256 KB P22: cmnlib64 (0000A18A, 00000040) 256 KB P23: cmnlib64bak (0000A1CA, 00000040) 256 KB P24: apdp (0000A20A, 00000040) 256 KB P25: msadp (0000A24A, 00000040) 256 KB P26: dpo (0000A28A, 00000001) 4 KB P27: fsg (0000A28B, 00000300) 3072 KB P28: splash (0000A58B, 00000500) 5 MB P29: sti (0000AA8B, 00000200) 2048 KB P30: boot (0000AC8B, 00002000) 32 MB P31: system (0000CC8B, 00120000) 4.5 GB P32: recovery (0012CC8B, 00003354) 51.33 MB Backuping fsg partition... Opening C:/Windows.old/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG KLUDG8J1CB-B0B1 0700 _fsg_0xa28b_0x300_04_03_2020_04_44_12.bin file... Reading. Please wait... Done. Elapsed time 00:00:00 SW: 2.0.6; FW: 1.24. Physical partition number: 5 Block count : 8192 (0x2000) Size : 32.00 MB P00: GPT (00000000, 00000006) 24 KB P01: modemst1 (00000006, 00000300) 3072 KB P02: modemst2 (00000306, 00000300) 3072 KB P03: fsc (00000606, 000019D9) 25.85 MB Backuping modemst1 partition... Opening C:/Windows.old/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG KLUDG8J1CB-B0B1 0700 _modemst1_0x6_0x300_04_03_2020_04_44_13.bin file... Reading. Please wait... Done. Elapsed time 00:00:00 SW: 2.0.6; FW: 1.24. Backuping modemst2 partition... Opening C:/Windows.old/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG KLUDG8J1CB-B0B1 0700 _modemst2_0x306_0x300_04_03_2020_04_44_13.bin file... Reading. Please wait... Done. Elapsed time 00:00:00 SW: 2.0.6; FW: 1.24. Save to C:/Users/LifeSecrat/Desktop/SAMSUNG KLUDG8J1CB-B0B1 0700 _04_03_2020__04_44_23 T.mpt file... Reading partition GPT... Done. Reading partition ssd... Done. Reading partition persist... Done. Reading partition misc... Done. Reading partition keystore... Done. Reading partition devcfg... Done. Reading partition devcfgbak... Done. Reading partition frp... Done. Reading partition metadata... Done. Reading partition abootu... Done. Reading partition priv... Done. Reading partition asdf... Done. Reading partition cache... Done. Reading partition quality... Done. Reading partition GPT... Done. Reading partition xbl... Done. Reading partition GPT... Done. Reading partition xblbak... Done. Reading partition GPT... Done. Reading partition reserve... Done. Reading partition cdt... Done. Reading partition ddr... Done. Reading partition GPT... Done. Reading partition rpm... Done. Reading partition rpmbak... Done. Reading partition tz... Done. Reading partition tzbak... Done. Reading partition hyp... Done. Reading partition hypbak... Done. Reading partition sec... Done. Reading partition pmic... Done. Reading partition pmicbak... Done. Reading partition modem... Done. Reading partition dsp... Done. Reading partition dip... Done. Reading partition mdtp... Done. Reading partition aboot... Done. Reading partition abootbak... Done. Reading partition devinfo... Done. Reading partition bluetooth... Done. Reading partition keymaster... Done. Reading partition keymasterbak... Done. Reading partition cmnlib... Done. Reading partition cmnlibbak... Done. Reading partition cmnlib64... Done. Reading partition cmnlib64bak... Done. Reading partition apdp... Done. Reading partition msadp... Done. Reading partition dpo... Done. Reading partition fsg... Done. Reading partition splash... Done. Reading partition sti... Done. Reading partition boot... Done. Reading partition system... Done. Reading partition recovery... ERROR[011]: Read error. At sector 1237131 Disconnected. |
All times are GMT +1. The time now is 19:52. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -