need kmdv6001dm-b620 firmware

[billymore]

please i need kmdv6001dm-b620 firmware

[andrei_d1978]

Originally Posted by billymore

please i need kmdv6001dm-b620 firmware

What's wrong with the support?

[sadewophone]

SW: 2.2.0; FW: 2.00.
RPMB: Counter of the successful data write requests = 41.
Downloaded file C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/KMDV6001DM-B620_VCT0__BY_SADEWO_PCB.BIN.
Disconnected.

Selected PIN - CONNECTOR.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)

Connecting...
Device : Samsung eMMC DV6DMB
Page size : 512 B
Block size : 512 B
Block count : 244277248
Size : 116.48 GB (119276.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100445636444D4202D3E7C485C50D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : DV6DMB
Product revision : 0.2
Product serial number : (hex) D3E7C485
Manufacturing date : 12/2018
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 8Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x02) 00000010
Boot bus width : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 40706048 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/DV6DMB_11_03_2021_14_24_01.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Counter of the successful data write requests = 41.

Writing eMMC firmware from file: C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/KMDV6001DM-B620_VCT0__BY_SADEWO_PCB.BIN...Done.
Finalizing...Done.
Write CID succesfully completed.
Disconnected.
EMMC writing firmware Done.
SW: 2.2.0; FW: 2.00.

Selected PIN - CONNECTOR.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)

Connecting...
Device : Samsung eMMC DV6DMB
Page size : 512 B
Block size : 512 B
Block count : 244277248
Size : 116.48 GB (119276.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100445636444D420219006A103605
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : DV6DMB
Product revision : 0.2
Product serial number : (hex) 19006A10
Manufacturing date : 03/2019
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 40706048 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/DV6DMB_11_03_2021_14_24_33.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.

[adnanrawalpindi]

KMDC6001DM
needed Frimware

[adnanrawalpindi]

KMDC6001DM
needed Frimware SM-A127F

[Medusa Box]

Hello.

Unfortunately, currently we don't have this firmware.

[adnanrawalpindi]

I have a phone but its KG/RMM lock can i make this emmc FW for using or no can't make