Lenovo tab A3300HV repair question [Answered] - GSM-Forum

aria-org · 05-08-2017, 16:43

lenovo tab a3300hv flash after dead ,before flashing bliking phone

all time flashing done no any error but same dead

so i mean its emmc folt and try to change a another pcb old emmc

now what to do

lenovo emmc info here

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto

Connecting...
Device : Hynix eMMC H8G2d
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info

CID : 90014A4838473264040503A254C3A15F
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G2d
Product revision : 0.5
Product serial number : (hex) 3A254C3
Manufacturing date : 10/2014
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G2d_08_05_2017_16_21_56.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.6; FW: 1.16.

another old emmc info here

Model Settings: Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A4834473164040501A199146119
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex) 1A19914
Manufacturing date : 06/2014
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G1d_08_05_2017_21_42_37.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.6; FW: 1.16.
P00: EXT2FS (00160A00, 000BC000)
P01: EXT2FS (0021CA00, 00296000)
P02: EXT2FS (00004800, 00005000)
P03: EXT2FS (00009800, 00005000)
P04: EXT2FS (0001BA00, 00145000)

now what to do help me team

Medusa Box · 05-09-2017, 07:43

Hello.

As You can see from your Software log, capacity (size) of original eMMC of your device is 8 (7.28) GB, but on new - only 4 (3728.00) GB:

Quote:

lenovo emmc info here

Quote:

Hynix eMMC H8G2d
...

Size : 7.28 GB

Quote:

another old emmc info here

Quote:

Hynix eMMC H4G1d
...

Size : 3728.00 MB

This can be not enough to write full firmware and to repair your device. It is better to use eMMC with the same (or bigger) size. But You can try with this (4 GB) eMMC also.

To do "Factory repair", perform the following steps:

1. Connect the device.
2. Go to «Factory Repair» tab in Medusa Pro Software.
3. Press «Repair devices based on MediaTek CPU's using scatter» button.
4. Select proper scatter and necessary files.
5. Press «Write partitions» button.

Please look video manual on how to use scatter here: http://forum.gsmhosting.com/vbb/f664...l#post12093451.

mastershex · 05-09-2017, 10:59

Quote:

Originally Posted by Medusa Box

Hello.

As You can see from your Software log, capacity (size) of original eMMC of your device is 8 (7.28) GB, but on new - only 4 (3728.00) GB:

This can be not enough to write full firmware and to repair your device. It is better to use eMMC with the same (or bigger) size. But You can try with this (4 GB) eMMC also.

To do "Factory repair", perform the following steps:

1. Connect the device.
2. Go to «Factory Repair» tab in Medusa Pro Software.
3. Press «Repair devices based on MediaTek CPU's using scatter» button.
4. Select proper scatter and necessary files.
5. Press «Write partitions» button.

Please look video manual on how to use scatter here: http://forum.gsmhosting.com/vbb/f664...l#post12093451.

so how can we resize the userdata partition on new emmc from 8 gig to 16gig ?????? just write userdata config ????

Medusa Box · 05-09-2017, 12:25

This depends on used eMMC and device. In this case no need to make resize, Software will do all necessary operations in the process of Factory Repair.

aria-org · 05-10-2017, 06:34

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto

Connecting...
Device : Samsung eMMC N5XZMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 1501004E35585A4D42019781CC1431F9
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : N5XZMB
Product revision : 0.1
Product serial number : (hex) 9781CC14
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes

Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/N5XZMB_09_05_2017_18_21_37.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.6; FW: 1.16.
P00: EXT2FS (00183A00, 000BC000)
P01: EXT2FS (0023FA00, 00296000)
P02: EXT2FS (00004800, 00005000)
P03: EXT2FS (00009800, 00005000)
P04: EXT2FS (0001BA00, 00168000)

---------------------------------------------------------------
Selected scatter file: G:/CHAINA TAB ALL/china tab/A3300HV_A442_01_19_140827_ROW/A3300HV_A442_01_19_140827_ROW/target_bin/MT6582_Android_scatter.txt.
Scatter file type 2.
Opened input file: G:/CHAINA TAB ALL/china tab/A3300HV_A442_01_19_140827_ROW/A3300HV_A442_01_19_140827_ROW/target_bin/preloader_huaqin82_tb_b2d_kk.bin

Found 6 eMMC supported CID:

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : K8U00M
eMMC CID : 1501004B385530304D

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : K7U00M
eMMC CID : 1501004B375530304D

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : K7XVMB
eMMC CID : 1501004B3758564D42

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : K8XVMB
eMMC CID : 1501004B3858564D42

eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H8G2d
eMMC CID : 90014A483847326404

eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : HAG4d
eMMC CID : 90014A484147346404

---------------------------------------------------------------
Selected scatter file: G:/CHAINA TAB ALL/china tab/A3300HV_A442_01_19_140827_ROW/A3300HV_A442_01_19_140827_ROW/target_bin/MT6582_Android_scatter.txt.
Scatter file type 2.
Opened input file: G:/CHAINA TAB ALL/china tab/A3300HV_A442_01_19_140827_ROW/A3300HV_A442_01_19_140827_ROW/target_bin/preloader_huaqin82_tb_b2d_kk.bin

Found 6 eMMC supported CID:

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : K8U00M
eMMC CID : 1501004B385530304D

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : K7U00M
eMMC CID : 1501004B375530304D

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : K7XVMB
eMMC CID : 1501004B3758564D42

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : K8XVMB
eMMC CID : 1501004B3858564D42

eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H8G2d
eMMC CID : 90014A483847326404

eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : HAG4d
eMMC CID : 90014A484147346404

Writing. Please wait...
Writing partition PRELOADER... Write data verification is enabled.
Write data verification is enabled.
Done.
Writing partition MBR... Write data verification is disabled.
Done.
Writing partition EBR1... Write data verification is disabled.
Done.
Writing partition UBOOT... Write data verification is disabled.
Done.
Writing partition BOOTIMG... Write data verification is disabled.
Done.
Writing partition RECOVERY... Write data verification is disabled.
Done.
Writing partition SEC_RO... Write data verification is disabled.
Done.
Writing partition LOGO... Write data verification is disabled.
Done.
Writing partition ANDROID... Done.
Writing partition CACHE... Done.
Writing partition USRDATA... Done.
Writing checksums...Done.
Writing finished.
SW: 1.3.6; FW: 1.16.
Disconnected.

another emmc write flash done and good soldering but set not power

where my fult

Medusa Box · 05-10-2017, 06:48

What device appear in PC Device Manager when You connect the Tab to PC after repairing?

aria-org · 05-10-2017, 08:35

dont connect with emmc ,without emmc connect ok

Medusa Box · 05-10-2017, 08:59

Try to use Samsung eMMC with 8 GB or higher capacity.

**aZimBahar** · 12-22-2017, 09:30

Can anyone share eMMC Pinouts

05-08-2017, 16:43	#1 (permalink)
aria-org Insane Poster Join Date: Jan 2017 Location: bangladesh dhaka Age: 34 Posts: 93 Member: 2668532 Status: Offline Thanks Meter: 28	Lenovo tab A3300HV repair question [Answered] lenovo tab a3300hv flash after dead ,before flashing bliking phone all time flashing done no any error but same dead so i mean its emmc folt and try to change a another pcb old emmc now what to do lenovo emmc info here Model Settings: Interface : eMMC Voltage : 1.8V Bus Mode : 1 Bus speed : Auto Connecting... Device : Hynix eMMC H8G2d Page size : 512 B Block size : 512 B Block count : 15269888 Size : 7.28 GB --------------------------------------------------------------- CID Info CID : 90014A4838473264040503A254C3A15F Manufacturer ID : 0X90 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X4A Product name : H8G2d Product revision : 0.5 Product serial number : (hex) 3A254C3 Manufacturing date : 10/2014 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFFFFFFFEF8A4040D3 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.6 (for MMC v4.5, v4.51) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : 01001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : Boot acknowledge sent during boot operation Bit Boot bus conditions : 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 3817472 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G2d_08_05_2017_16_21_56.bin. Connect successful. --------------------------------------------------------------- SW: 1.3.6; FW: 1.16. another old emmc info here Model Settings: Interface : eMMC Voltage : 1.8V Bus Mode : 1 Bus speed : Auto Connecting... Device : Hynix eMMC H4G1d Page size : 512 B Block size : 512 B Block count : 7634944 Size : 3728.00 MB --------------------------------------------------------------- CID Info CID : 90014A4834473164040501A199146119 Manufacturer ID : 0X90 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X4A Product name : H4G1d Product revision : 0.5 Product serial number : (hex) 1A19914 Manufacturing date : 06/2014 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFFFFFFFEF8A4040D3 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.6 (for MMC v4.5, v4.51) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : 01001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : Boot acknowledge sent during boot operation Bit Boot bus conditions : 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 1908736 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G1d_08_05_2017_21_42_37.bin. Connect successful. --------------------------------------------------------------- SW: 1.3.6; FW: 1.16. P00: EXT2FS (00160A00, 000BC000) P01: EXT2FS (0021CA00, 00296000) P02: EXT2FS (00004800, 00005000) P03: EXT2FS (00009800, 00005000) P04: EXT2FS (0001BA00, 00145000) now what to do help me team Last edited by Octopus box; 12-22-2017 at 10:52.

05-09-2017, 12:25	#4 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	This depends on used eMMC and device. In this case no need to make resize, Software will do all necessary operations in the process of Factory Repair.

05-10-2017, 06:34	#5 (permalink)
aria-org Insane Poster Join Date: Jan 2017 Location: bangladesh dhaka Age: 34 Posts: 93 Member: 2668532 Status: Offline Thanks Meter: 28	Model Settings: Interface : eMMC Voltage : 1.8V Bus Mode : 1 Bus speed : Auto Connecting... Device : Samsung eMMC N5XZMB Page size : 512 B Block size : 512 B Block count : 7634944 Size : 3728.00 MB --------------------------------------------------------------- CID Info CID : 1501004E35585A4D42019781CC1431F9 Manufacturer ID : 0X15 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : N5XZMB Product revision : 0.1 Product serial number : (hex) 9781CC14 Manufacturing date : 03/2014 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFF6DBFFEF8E40400D CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.7 (for MMC v5.0, v5.01) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 512 Kbytes Partition config : 01001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : Boot acknowledge sent during boot operation Bit Boot bus conditions : 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 1269760 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/N5XZMB_09_05_2017_18_21_37.bin. Connect successful. --------------------------------------------------------------- SW: 1.3.6; FW: 1.16. P00: EXT2FS (00183A00, 000BC000) P01: EXT2FS (0023FA00, 00296000) P02: EXT2FS (00004800, 00005000) P03: EXT2FS (00009800, 00005000) P04: EXT2FS (0001BA00, 00168000) --------------------------------------------------------------- Selected scatter file: G:/CHAINA TAB ALL/china tab/A3300HV_A442_01_19_140827_ROW/A3300HV_A442_01_19_140827_ROW/target_bin/MT6582_Android_scatter.txt. Scatter file type 2. Opened input file: G:/CHAINA TAB ALL/china tab/A3300HV_A442_01_19_140827_ROW/A3300HV_A442_01_19_140827_ROW/target_bin/preloader_huaqin82_tb_b2d_kk.bin Found 6 eMMC supported CID: eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : K8U00M eMMC CID : 1501004B385530304D eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : K7U00M eMMC CID : 1501004B375530304D eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : K7XVMB eMMC CID : 1501004B3758564D42 eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : K8XVMB eMMC CID : 1501004B3858564D42 eMMC Vendor ID : 90 (Hynix eMMC) eMMC Model ID : 4A01 eMMC Name : H8G2d eMMC CID : 90014A483847326404 eMMC Vendor ID : 90 (Hynix eMMC) eMMC Model ID : 4A01 eMMC Name : HAG4d eMMC CID : 90014A484147346404 --------------------------------------------------------------- Selected scatter file: G:/CHAINA TAB ALL/china tab/A3300HV_A442_01_19_140827_ROW/A3300HV_A442_01_19_140827_ROW/target_bin/MT6582_Android_scatter.txt. Scatter file type 2. Opened input file: G:/CHAINA TAB ALL/china tab/A3300HV_A442_01_19_140827_ROW/A3300HV_A442_01_19_140827_ROW/target_bin/preloader_huaqin82_tb_b2d_kk.bin Found 6 eMMC supported CID: eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : K8U00M eMMC CID : 1501004B385530304D eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : K7U00M eMMC CID : 1501004B375530304D eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : K7XVMB eMMC CID : 1501004B3758564D42 eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : K8XVMB eMMC CID : 1501004B3858564D42 eMMC Vendor ID : 90 (Hynix eMMC) eMMC Model ID : 4A01 eMMC Name : H8G2d eMMC CID : 90014A483847326404 eMMC Vendor ID : 90 (Hynix eMMC) eMMC Model ID : 4A01 eMMC Name : HAG4d eMMC CID : 90014A484147346404 Writing. Please wait... Writing partition PRELOADER... Write data verification is enabled. Write data verification is enabled. Done. Writing partition MBR... Write data verification is disabled. Done. Writing partition EBR1... Write data verification is disabled. Done. Writing partition UBOOT... Write data verification is disabled. Done. Writing partition BOOTIMG... Write data verification is disabled. Done. Writing partition RECOVERY... Write data verification is disabled. Done. Writing partition SEC_RO... Write data verification is disabled. Done. Writing partition LOGO... Write data verification is disabled. Done. Writing partition ANDROID... Done. Writing partition CACHE... Done. Writing partition USRDATA... Done. Writing checksums...Done. Writing finished. SW: 1.3.6; FW: 1.16. Disconnected. another emmc write flash done and good soldering but set not power where my fult

05-10-2017, 06:48	#6 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	What device appear in PC Device Manager when You connect the Tab to PC after repairing?

05-10-2017, 08:35	#7 (permalink)
aria-org Insane Poster Join Date: Jan 2017 Location: bangladesh dhaka Age: 34 Posts: 93 Member: 2668532 Status: Offline Thanks Meter: 28	dont connect with emmc ,without emmc connect ok

05-10-2017, 08:59	#8 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Try to use Samsung eMMC with 8 GB or higher capacity.

12-22-2017, 09:30	#9 (permalink)
aZimBahar Product Manager Join Date: Dec 2009 Location: CEO.of.ROMDevelopers Age: 32 Posts: 16,053 Member: 1174508 Status: Offline Sonork: 100.1593820 Thanks Meter: 11,979	Can anyone share eMMC Pinouts