Need Moto XT1068 dump [Answered]
 

Hi medusa team,
I need MOTO xt1068 full dump or srf file...
Already one srf file in support...
The file desdboot is ok power on mobile fastboot mode,
But can't flash and not bootloader unlock...
Pls give full dump....

Hello.

This is because You have no written original CID backup from your phone. If You have no original CID backup, it will be not possible to write firmware or unlock boot loader after boot repairing. Also, full flash will not help You to solve this problem.

found CID backup in medusapro >>backup folder...
how to write cid file..............

Post here full Software log with all of performed operations with the devcie from the beginning, we will check.

connect info:


Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : motorola
Model : xt1068 8gb
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/MOTOROLA_XT1068_8GB_(TEST)_THANKS_TO_MR_CBCELULAR. srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : 12 MHz

Connecting...
Device : Sandisk eMMC SDW16G
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID : 45010053445731364701343A603FD1CB
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SDW16G
Product revision : 0.1
Product serial number : (hex) 343A603F
Manufacturing date : 13/2014
---------------------------------------------------------------
CSD Info

CSD : D00F00320F5903FFFFFFFFEF8A40401F
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7249920 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/SDW16G_22_12_2017_12_34_24.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.0; FW: 1.22.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 019DD7DF) 12.93 GB
Backuping Gpt partition...
Opening C:/Program Files/Medusa Pro Software/Backups/SDW16G_Gpt_0x0_0x100_22_12_2017_12_34_24.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.5.0; FW: 1.22.
Backuping Cid partition...
Opening C:/Program Files/Medusa Pro Software/Backups/SDW16G_Cid_0x29112_0x100_22_12_2017_12_34_24.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.5.0; FW: 1.22.

This is the log after performing "Smart Repair" procedure. Post here Software log with device connection info before Smart Repair and log with "Smart Repair" operation.

CID write successfully......
found CID address(start and length) in smart repair and partition manager....
MOTO XT1068 CID address:
start : 5222400
length : 20000


write CID :
1. click main tab in medusa pro software
2. select custom
3. write start and length address
4. then click write option
5. select correct backup CID file in backup folder
6.write successfull..

Switched to user area.
Opening C:/Program Files/Medusa Pro Software/Backups/SDW16G_Cid_0x29112_0x100_12_12_2017_10_58_52.bin file...
Write data verification is disabled.
Writing. Please wait... Done.
SW: 1.5.0; FW: 1.22.
Disconnected.


dead boot after mobile in fastboot mode..
and select barcode option
imei not showing....
after write cid imei showing in fastboot mode select barcode....
thanks for remaind medusa pro product supporter.....
your are remaining CID write....thanks

now will i try to flashing or bootloader unlock....
thanks.....

Motorola XT1068 (Moto G 2nd 3G DS Titan) at USB [FASTBOOT] {Get Unlock Data}
3A85890436117169#00000000000000
00000000585431303638000000#FB60
69B2AA455C6A2FD82814E55C30C5F6E
B7B3B#C3DCF5080F000000000000000
0000000
OKAY

Motorola XT1068 (Moto G 2nd 3G DS Titan) at USB [FASTBOOT] {OEM Unlock}
!!! Have 30sec to confirm Unlock, If Device Asked
Unlock code = 6OJ2JUPBEE56OTFUJ6T4
fastboot oem lock currently disabled!
FAIL

bootloader unlock disabled pls help