GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > GSMServer Products > Medusa

Reply
 
LinkBack Thread Tools Display Modes
Old 04-13-2021, 14:27   #1 (permalink)
Freak Poster
 
Join Date: Dec 2008
Location: GSM DÜNYASI TEAM.
Posts: 240
Member: 923948
Status: Offline
Sonork: 100.1655611
Thanks Meter: 35
Sony G3221 FTF file write error [Answered]


RPMB: Counter of the successful data write requests = 0.
Please select file.
Selected ftf file: C:/Users/mesut/Desktop/Sony XA1 Ultra_G3221/FTF/G3221_48.1.A.2.109_1308-0674_Customized-TR/G3221_48.1.A.2.109_1308-0674_R1B.ftf.
File parsing finished.
Writing MBR... Done
Writing primary GPT... Done
Writing secondary GPT... Done
Write data verification is enabled.
Writing. Please wait...
Backuping TA partition... Opening C:/Program Files/Medusa Pro Software/Backups/RX14MB_TA_0x28400_0x1000_13_04_2021_14_27_03.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 2.00.
Done.
Writing partition fotakernel...
ERROR[012]: Write error.
At sector 0
Disconnected.
  Reply With Quote
Old 04-14-2021, 09:28   #2 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 9,358
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks Meter: 3,395
Hello.

Please post here full Software log with performed operation, we will check it.
  Reply With Quote
The Following 2 Users Say Thank You to Medusa Box For This Useful Post:
Old 04-14-2021, 10:39   #3 (permalink)
Freak Poster
 
Join Date: Dec 2008
Location: GSM DÜNYASI TEAM.
Posts: 240
Member: 923948
Status: Offline
Sonork: 100.1655611
Thanks Meter: 35
Quote:
Originally Posted by Medusa Box View Post
Hello.

Please post here full Software log with performed operation, we will check it.
Welcome to Medusa Pro Software version 2.2.0.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Loading firmware. Please wait... Done.
Selected eMMC interface.
Socket detected!

Selected BGA 221 socket.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting to server. Please wait...
Connection to server successful
Full speed mode!

Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_35_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Done.
SW: 2.2.0; FW: 2.00.
Disconnected.

Selected BGA 221 socket.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Full speed mode!

Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_36_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.

Writing eMMC firmware from file: C:/Users/mesut/Desktop/G3221/G3221 samsung emmc backup/RX14MB_VNC0_00000000000000000000000000000000_8_0_R 1_14_08_19.bin...Done.
Finalizing...Done.
Write CID succesfully completed.
Disconnected.
EMMC writing firmware Done.
SW: 2.2.0; FW: 2.00.

Selected BGA 221 socket.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Full speed mode!

Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_36_32.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Flash geometry successfully changed.
Boot1, Boot2 size changed to 4 MB.
RPMB size changed to 4 MB.
Disconnected.

Selected BGA 221 socket.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Full speed mode!

Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_36_55.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Boot config succesfully changed!
Disconnected.

Selected BGA 221 socket.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Full speed mode!

Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_37_09.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Selected ftf file: C:/Users/mesut/Desktop/G3221/Sony XA1 Ultra_G3221/FTF/G3221_48.1.A.2.109_1308-0674_Customized-TR/G3221_48.1.A.2.109_1308-0674_R1B.ftf.
File parsing finished.
Writing MBR... Done
Writing primary GPT... Done
Writing secondary GPT... Done
Write data verification is enabled.
Writing. Please wait...
Backuping TA partition... Opening C:/Program Files/Medusa Pro Software/Backups/RX14MB_TA_0x28400_0x1000_14_04_2021_12_38_20.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 2.00.
Done.
Writing partition fotakernel...
ERROR[012]: Write error.
At sector 0
  Reply With Quote
Old 04-15-2021, 10:17   #4 (permalink)
Product Supporter
 
Medusa Box's Avatar
 
Join Date: Mar 2011
Location: Octopus-team
Posts: 9,358
Member: 1538383
Status: Offline
Sonork: 100.1587278
Thanks Meter: 3,395
Hello.

Thanks for the report, we will try to fix that issue on future updates.
  Reply With Quote
The Following 2 Users Say Thank You to Medusa Box For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 15:28.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.22927 seconds with 8 queries

SEO by vBSEO