is there an instruction for the "constructor" function in medusa? [Answered]

[gsmmixail]

Good day. Please tell me if there is an instruction for the constructor function in medusa?



I have a dump of the userdata section. the emmc needs to be replaced on the phone. Can I add the missing partitions using this function and make a dump for writing in emmc so that the phone works after installing the memory?

[andrei_d1978]

gsmmixail
And on which phone do you want to change the memory?
dump of the userdata only needed for data extraction
Depending on the model and processor, you need a dump of USER area, boot1,boot2, GP1

[gsmmixail]

j260f. boot 1 boot2 и gp1 (also have)

[andrei_d1978]

Originally Posted by gsmmixail

j260f. boot 1 boot2 и gp1 (also have)

J260f the CPU with the Exynos . You are lying, there is no GP1 there) When replacing memory on this processor, follow these rules 1. The RPMB in memory must be clean. Software on Medusa pro does not show the purity of this section, on Medusa pro II shows 2. It is usually enough to fill the native userarea dump( without bold sections) and boot1. It is especially important that boot1 is working. If in doubt after spilling native dumps, write down the factory firmware for the Samsung vendor

[gsmmixail]

Thanks for the answer. I doubt but1 works. From the firmware, I have the usual 5 files. I understand that they will not work. Tell me how can I determine that the firmware I will find is the factory one? where can i find the factory firmware?

Text trnslation:
Спасибо за ответ. Я сомневаюсь, что бут1 работает. Из прошивок у меня есть обычные на 5 файлов. Я так понимаю, что они не подойдут. Скажите как мне определить, что прошивка которую я найду заводская? где я могу найти заводскую прошивку?

[gsmmixail]

Thanks for the answer. I doubt but1 works. From the firmware, I have the usual 5 files. I understand that they will not work. Tell me how can I determine that the firmware I will find is the factory one? where can i find the factory firmware?

Text translation:
Спасибо за ответ. Я сомневаюсь, что бут1 работает. Из прошивок у меня есть обычные на 5 файлов. Я так понимаю, что они не подойдут. Скажите как мне определить, что прошивка которую я найду заводская? где я могу найти заводскую прошивку?

[andrei_d1978]

Originally Posted by gsmmixail

Thanks for the answer. I doubt but1 works. From the firmware, I have the usual 5 files. I understand that they will not work. Tell me how can I determine that the firmware I will find is the factory one? where can i find the factory firmware?

Here is an English-language forum
Firmware that sews Odin and there are factory