GT-I8190 not fully supported [ Solved ] - GSM-Forum

pitka · 12-26-2012, 10:29

Hi Oz,

unfortunatelly ORT (v1.87) cant fully recognize my I8190, see log :

Samsung GT-I8190
U8500 1.8V
Scan CPU failed(-100)
Samsung GT-I8190
U8500 1.8V
arm.tap,pos:0,IRLength:4,DeviceID:0x62286041
Scan CPU failed(-107)
Samsung GT-I8190
U8500 1.8V
arm.tap,pos:0,IRLength:4,DeviceID:0x62286041
Scan CPU failed(-107)

TCK:12MHz
Model:AutoModel
arm.tap,pos:0,IRLength:4,DeviceID:0x62286041.
Scan CPU failed(-107)

Please could you look and let me know ?

**Electroboys** · 12-26-2012, 10:51

TCK works with 4MHZ in Universal Programmer !

Best Regards
Oz.

pitka · 12-26-2012, 13:06

Even 4Mhz still isnt fully detected. I already tried all FRQ, see log :

Vref:1.828V
TCK:04MHz
Model:AutoModel
arm.tap,pos:0,IRLength:4,DeviceID:0x62286041.
Scan CPU failed(-107)

pitka · 12-26-2012, 13:14

And just for reference,see log with oldest 1.76 version :

Vref:1.834V
TCK:04MHz
Model:AutoModel
TAP0,IRLength:6,DeviceID:0x62286041
Unknown CPUID=0x62286041

sahbettin · 12-27-2012, 01:52

jtag connection, check thoroughly, and I mean try the latest version

pitka · 01-02-2013, 22:01

See for working dumps :

UploadMB.com

Enjooooy

pitka · 01-05-2013, 19:38

I found root cause why some HW revisions are supported and some of not :

Working unit has these chips :
******* SDIN7DU2-8G flash
Samsung K4P8G304EB-AGC1 Multichip Memory - Mobile DDR2 SDRAM Memory
AB8505-DB1 H53 990jY VQ MYS 6K 239 - cpu

Non working (not supported yet) has :
******* SDIN7DU2-8G flash
Samsung K4P6G304EB-AGC1 Multichip Memory - Mobile DDR2 SDRAM Memory
AB85051CB1 H53 3A037VQ FRA 3A 226 - cpu

So difference is : RAM and CPU revision.

Tricom · 01-07-2013, 19:24

Yes probably hardware differrnces..
I have succesfully read I8190 with ort my hardware worked.fine

Br

**Electroboys** · 01-15-2013, 08:00

Hi ,

There is some phone states that phone does not stay up during repair process
and it causes some fail issues but it is fixed permanently in latest version
with the help of USB Support of these type of processors !

Recommended Procedure :

Connect JTAG Pinouts
Connect USB Cable to phone
Install USB Drivers "\drivers\STERICSSON_U8500"
Click Repair

Download Latest ORT Plus Version : here

Samsung GT-I8190 DLL : here

Screenshot :

PS : if you are working with Universal Programmer TAB with the "ST Ericsson U8500 CPU Phone" you can download manual here

Latest GT-I8190 DLL , ORT Plus Software and ST Ericsson U8500 Manuals are uploaded to support page already !

Best Regards
ORT Team

pitka · 01-15-2013, 20:43

Hi Oz,

big thanks for great job.

I can confirm that issue is fixed :

Vref:2.230V
TCK:05MHz
Model:U8500_eMMC
arm.tap,pos:0,IRLength:4,DeviceID:0x62286041.
FlashID:0x454D303845010053,SubFlashID:0x27F37F3647 906014
BlockSize:512
PageSize:512
Density:8192MB
Actual Density:0x1D2000000
FlashName:SEM08G

babbu · 03-03-2013, 11:57

[QUOTE=pitka;9108000]Hi Oz,

HI
had u repaired us hndset with ort? i need some help regarding this. http://forum.gsmhosting.com/vbb/f665...7/#post9238432 pls tell me iff u have more info.
B.R.
BABBU

haslyn · 09-29-2014, 06:38

hi ort team help me pls i8190 dead boot

Device is connected
ORT JTAG Firmware 1.04
U8500 USB is not ready.
U8500 USB is ready!
Vref:1.920V
TCK:05MHz
Model:U8500_eMMC
arm.tap,pos:0,IRLength:4,DeviceID:0x62286041.

jatchaminda · 09-30-2014, 13:57

Quote:

Originally Posted by haslyn

hi ort team help me pls i8190 dead boot

Device is connected
ORT JTAG Firmware 1.04
U8500 USB is not ready.
U8500 USB is ready!
Vref:1.920V
TCK:05MHz
Model:U8500_eMMC
arm.tap,pos:0,IRLength:4,DeviceID:0x62286041.

check jtag connection twice maybe eMMc damaged what is the mobile history ?

prakashmborana · 08-22-2015, 16:19

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I8190 V1.0.4836.65460]

Connecting to the dead body...OK
Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz

Detected dead body ID: 0xFFFFFFFE

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I8190 V1.0.4836.65460]

Connecting to the dead body...OK
WARNING: Connection via USB failed with Code: 0xC000FF01
Detected dead body ID: 0xFFFFFFFE - WRONG!!!
ERROR: Current ID does not belong to the Samsung I8190 family.

any solotion spr pls help me
kgnmobile service center yahoo id [email protected]

prakashmborana · 08-22-2015, 16:24

EasyJtag Suite ver.: 2.0.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 06014013C4A2D612 ,FW Ver.: 01.52
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
Using EasyRepair Mode...
Checking repair data...
Timeout Error while reading approx : 0x00000008 bytes over DCC
ERROR: No loader answer
DCC Loader init Failed!
BUG: emmc unknown controller initialization failure
EasyJtag Suite ver.: 2.0.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
Done with error(s)...

12-26-2012, 10:29	#1 (permalink)
pitka Junior Member Join Date: Jun 2009 Posts: 34 Member: 1057960 Status: Offline Thanks Meter: 6	GT-I8190 not fully supported [ Solved ] Hi Oz, unfortunatelly ORT (v1.87) cant fully recognize my I8190, see log : Samsung GT-I8190 U8500 1.8V Scan CPU failed(-100) Samsung GT-I8190 U8500 1.8V arm.tap,pos:0,IRLength:4,DeviceID:0x62286041 Scan CPU failed(-107) Samsung GT-I8190 U8500 1.8V arm.tap,pos:0,IRLength:4,DeviceID:0x62286041 Scan CPU failed(-107) TCK:12MHz Model:AutoModel arm.tap,pos:0,IRLength:4,DeviceID:0x62286041. Scan CPU failed(-107) Please could you look and let me know ?

01-15-2013, 08:00	#9 (permalink)
Electroboys Product Manager Join Date: Oct 2001 Location: GSMFABRICA Age: 43 Posts: 2,711 Member: 6594 Status: Offline Sonork: 100.27285 Thanks Meter: 22,500	Hi , There is some phone states that phone does not stay up during repair process and it causes some fail issues but it is fixed permanently in latest version with the help of USB Support of these type of processors ! Recommended Procedure : Connect JTAG Pinouts Connect USB Cable to phone Install USB Drivers "\drivers\STERICSSON_U8500" Click Repair Download Latest ORT Plus Version : here Samsung GT-I8190 DLL : here Screenshot : PS : if you are working with Universal Programmer TAB with the "ST Ericsson U8500 CPU Phone" you can download manual here Latest GT-I8190 DLL , ORT Plus Software and ST Ericsson U8500 Manuals are uploaded to support page already ! Best Regards ORT Team

08-22-2015, 16:19	#14 (permalink)
prakashmborana Freak Poster Join Date: Oct 2007 Location: GOA Posts: 413 Member: 600436 Status: Offline Thanks Meter: 219	i8190 dead boot repaire error how to solve Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung I8190 V1.0.4836.65460] Connecting to the dead body...OK Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz Detected dead body ID: 0xFFFFFFFE Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung I8190 V1.0.4836.65460] Connecting to the dead body...OK WARNING: Connection via USB failed with Code: 0xC000FF01 Detected dead body ID: 0xFFFFFFFE - WRONG!!! ERROR: Current ID does not belong to the Samsung I8190 family. any solotion spr pls help me kgnmobile service center yahoo id [email protected]

08-22-2015, 16:24	#15 (permalink)
prakashmborana Freak Poster Join Date: Oct 2007 Location: GOA Posts: 413 Member: 600436 Status: Offline Thanks Meter: 219	samsung i8190 daed boot repaire error how to solve EasyJtag Suite ver.: 2.0.0.0 / wxWidgets 3.1.0-W-U started. Operating system ver.: Windows XP (build 2600, Service Pack 3). For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. \| EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL Check security...OK Initialising: SAMSUNG GT-I8190 Config ver.:1.01 I/O Level set to : 2600 mV Box S/N: 06014013C4A2D612 ,FW Ver.: 01.52 Connecting to Target... U8500 USB BOOTROM : device 04CC:8500 opened success: set configuration #1 success: claim_interface #0 Sending XLOADER... success: bulk read 4 bytes Done. JTAG device: U8500 CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4 CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9 JTAG device: U8500 CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6 CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC Halting CPU... Initialize hardware... Starting target communication... Detecting emmc memory parameters of bank (0) ... Using EasyRepair Mode... Checking repair data... Timeout Error while reading approx : 0x00000008 bytes over DCC ERROR: No loader answer DCC Loader init Failed! BUG: emmc unknown controller initialization failure EasyJtag Suite ver.: 2.0.0.0 / wxWidgets 3.1.0-W-U started. Operating system ver.: Windows XP (build 2600, Service Pack 3). For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. \| EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL Check security...OK Initialising: SAMSUNG GT-I8190 Config ver.:1.01 Connecting to Target... U8500 USB BOOTROM : device 04CC:8500 opened success: set configuration #1 success: claim_interface #0 Sending XLOADER... success: bulk read 4 bytes Done. U8500 USB BOOTROM : device 04CC:8500 opened success: set configuration #1 success: claim_interface #0 Sending XLOADER... success: bulk read 4 bytes Done. Done with error(s)...

12-26-2012, 10:51	#2 (permalink)
Electroboys Product Manager Join Date: Oct 2001 Location: GSMFABRICA Age: 43 Posts: 2,711 Member: 6594 Status: Offline Sonork: 100.27285 Thanks Meter: 22,500	TCK works with 4MHZ in Universal Programmer ! Best Regards Oz.

12-26-2012, 13:06	#3 (permalink)
pitka Junior Member Join Date: Jun 2009 Posts: 34 Member: 1057960 Status: Offline Thanks Meter: 6	Even 4Mhz still isnt fully detected. I already tried all FRQ, see log : Vref:1.828V TCK:04MHz Model:AutoModel arm.tap,pos:0,IRLength:4,DeviceID:0x62286041. Scan CPU failed(-107)

12-26-2012, 13:14	#4 (permalink)
pitka Junior Member Join Date: Jun 2009 Posts: 34 Member: 1057960 Status: Offline Thanks Meter: 6	And just for reference,see log with oldest 1.76 version : Vref:1.834V TCK:04MHz Model:AutoModel TAP0,IRLength:6,DeviceID:0x62286041 Unknown CPUID=0x62286041

12-27-2012, 01:52	#5 (permalink)
sahbettin Freak Poster Join Date: Dec 2005 Posts: 433 Member: 215288 Status: Offline Thanks Meter: 65	jtag connection, check thoroughly, and I mean try the latest version

01-02-2013, 22:01	#6 (permalink)
pitka Junior Member Join Date: Jun 2009 Posts: 34 Member: 1057960 Status: Offline Thanks Meter: 6	See for working dumps : UploadMB.com Enjooooy

01-05-2013, 19:38	#7 (permalink)
pitka Junior Member Join Date: Jun 2009 Posts: 34 Member: 1057960 Status: Offline Thanks Meter: 6	I found root cause why some HW revisions are supported and some of not : Working unit has these chips : ***** SDIN7DU2-8G flash Samsung K4P8G304EB-AGC1 Multichip Memory - Mobile DDR2 SDRAM Memory AB8505-DB1 H53 990jY VQ MYS 6K 239 - cpu Non working (not supported yet) has : ***** SDIN7DU2-8G flash Samsung K4P6G304EB-AGC1 Multichip Memory - Mobile DDR2 SDRAM Memory AB85051CB1 H53 3A037VQ FRA 3A 226 - cpu So difference is : RAM and CPU revision.

01-07-2013, 19:24	#8 (permalink)
Tricom Freak Poster Join Date: May 2009 Posts: 388 Member: 1037562 Status: Offline Sonork: 100. Thanks Meter: 53	Yes probably hardware differrnces.. I have succesfully read I8190 with ort my hardware worked.fine Br

01-15-2013, 20:43	#10 (permalink)
pitka Junior Member Join Date: Jun 2009 Posts: 34 Member: 1057960 Status: Offline Thanks Meter: 6	Hi Oz, big thanks for great job. I can confirm that issue is fixed : Vref:2.230V TCK:05MHz Model:U8500_eMMC arm.tap,pos:0,IRLength:4,DeviceID:0x62286041. FlashID:0x454D303845010053,SubFlashID:0x27F37F3647 906014 BlockSize:512 PageSize:512 Density:8192MB Actual Density:0x1D2000000 FlashName:SEM08G

03-03-2013, 11:57	#11 (permalink)
babbu No Life Poster Join Date: Jan 2004 Posts: 872 Member: 50037 Status: Offline Sonork: 1580523 Thanks Meter: 193	[QUOTE=pitka;9108000]Hi Oz, HI had u repaired us hndset with ort? i need some help regarding this. http://forum.gsmhosting.com/vbb/f665...7/#post9238432 pls tell me iff u have more info. B.R. BABBU

09-29-2014, 06:38	#12 (permalink)
haslyn No Life Poster Join Date: Jul 2007 Location: pilipinas got talent... Posts: 958 Member: 550117 Status: Offline Thanks Meter: 265	hi ort team help me pls i8190 dead boot Device is connected ORT JTAG Firmware 1.04 U8500 USB is not ready. U8500 USB is ready! Vref:1.920V TCK:05MHz Model:U8500_eMMC arm.tap,pos:0,IRLength:4,DeviceID:0x62286041.