GSM-Forum - [2014-2015] Easy-JTAG. Request phones for ADDING ONLY HERE

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)

- - [2014-2015] Easy-JTAG. Request phones for ADDING ONLY HERE (https://forum.gsmhosting.com/vbb/f672/2014-2015-easy-jtag-request-phones-adding-only-here-1791052/)

try to add celkon and xolo models which are growing market in india.thanks

need support for unsupported model..micromax A111!!!!

Sir i have one Micromax A111 For dead boot repair it has Quallcomm cpu inside
here is clean photos of pcb

http://s21.postimg.org/6qp313hc7/DSCN9730.jpg
http://s21.postimg.org/4i6b60kuf/DSCN9731.jpg
http://s21.postimg.org/5061zlzt3/DSCN9732.jpg
http://s21.postimg.org/b2doq3o93/DSCN9734.jpg
Waiting for your reply!!!

can you unlock Samsung Galaxy S4 SCH-R970C ,Cricket, cdma

Hi Masters,

Please add Samsung GT-I9506 full JTAG support.
Qualcomm based phone
BR.

Plea support HTC Desire U T327E

Please HTC HD2 ,may you please add its repair

Quote:

Originally Posted by omi17 (Post 10444557)

Can you colder JTAG pins and use finder ? We can add this device if you assist!

Good Day Team Z3X EASY J-TAG can you please add LG-P970 Deadboot Repair...

add SCH-I535 dead boot repair please.

please add cherry mobile hyper

lg lu6200 and lgf160 emmc not samsung

lg f160 connect ,read write ok,but not format...,config,emmc toshiba
connect lu 6200 ok but not format,not read write

Z3X EasyJtag Software ver. 1.5.6.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 0D00401A13836xxx, ,FW Ver.: 01.50
CMD Pullup Level:1680 mV
CMD Active Level:1629 mV
eMMC Device Information
EMMC CID : 90014A48594E49582056001DA162BE7A
EMMC CSD : D04F01320F5903FFFFFFFFEF8A400060
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 11/2011 Rev.0x56
EMMC NAME: HYNIX , S/N: 1941858
EMMC ROM1 (Main User Data) Capacity: 3448 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: HYNIX _ 1941858_20140606_1506.extcsd
Done.

Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1680 mV
CMD Active Level:1639 mV
Reading 0x000000200000 bytes from 0x000000000000 ...ROM2 ( BOOT1 ROM)
Read Check Failed, Reason: CARD Data FIFO Timeout Error
Firmware file...F:\LG\eMMC_Firmware.bin
Running:SAMSUNG: MoviNAND Firmware extraction...

Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1680 mV
CMD Active Level:1639 mV
ERROR: This eMMC are not Samsung!
Done!

Good Day Team Z3X EASY J-TAG can you add LG-LS980 (LG G2 Sprint USA) please. For deadboot Repair... Thank you

Please add Samsung Korean version M200S

pls add htc desire hd2 pb81120

i8350 boot rapair needed . waiting...