Can't init EMMC, Reason: CARD Operation Condition Timeout Error - GSM-Forum

089999945 · 06-09-2014, 07:43

i try connect s3 no product name so like this

Z3X EasyJtag Software ver. 1.5.1.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 171xxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1381 mV
CMD Active Level:1825 mV
Can't init EMMC, Reason: CARD Operation Condition Timeout Error
===================================
Done.

what problem ,pls help me all user and supporter.

e_dcel · 06-09-2014, 08:18

doudble chec wire or may be damage emmc

br

alb97 · 06-09-2014, 10:47

Quote:

Originally Posted by e_dcel

doudble chec wire or may be damage emmc

br

same problem check wires ,all ok same error n7108 and n7100 two phones ?

Asiatic Rebel · 06-18-2014, 07:44

im 20 pcs VT EMMC "CARD Operation Condition Timeout Error"

emmc dead

NoName® · 06-18-2014, 07:52

I wrote many many times ago. This kind of eMMC cards are not responding on most commands. Unable to make any operations. Only replacement.

Connection are ok if you got this error.

wissso · 07-01-2014, 17:17

mmm i have the same prob

089999945 · 07-02-2014, 03:51

Quote:

Originally Posted by NoName®

I wrote many many times ago. This kind of eMMC cards are not responding on most commands. Unable to make any operations. Only replacement.

Connection are ok if you got this error.

bro some eMMC chip first connect is ok but after use Repair 00000
it go to Can't init EMMC, Reason: CARD Operation Condition Timeout Error
y like this?

psytr0nic · 07-02-2014, 16:11

Yeah I got a similar case as this one
earlier Emmc was 00000 I repaired, and now it can't be detected !

Quote:

Originally Posted by 089999945

bro some eMMC chip first connect is ok but after use Repair 00000
it go to Can't init EMMC, Reason: CARD Operation Condition Timeout Error
y like this?

kopito · 07-30-2014, 21:49

Z3X EasyJtag Software ver. 1.5.9.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 0B00501xxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1206 mV
CMD Active Level:1577 mV
Can't init EMMC, Reason: CARD Operation Condition Timeout Error
===================================
Done.

sa5663 · 09-11-2014, 21:40

I am trying to read a SDIN5D2-2G eMMC chip using the esocket and the Z3X-Pro Easy Jtag device. The chip is recognized but when I try to read it I get the error "Read Check Failed, Reason: CARD Data FIFO Timeout Error". Can you tell me how to correct this error?

laxmi kamlesh · 09-12-2014, 07:13

Quote:

Can't init EMMC, Reason: CARD Operation Condition Timeout Error

error reason

1.wrong sold 3.3v ( vcc)

089999945 · 09-14-2014, 11:16

Quote:

Originally Posted by laxmi kamlesh

error reason

1.wrong sold 3.3v ( vcc)

not wrong solder with 3.3v

i tell Detail ready about problem

Quote:

bro some eMMC chip first connect is ok but after use Repair 00000
it go to Can't init EMMC, Reason: CARD Operation Condition Timeout Error
y like this?

laxmi kamlesh · 09-14-2014, 13:58

Quote:

Originally Posted by 089999945

not wrong solder with 3.3v

i tell Detail ready about problem

I Check This problem On 2 pice of GT-p3100 and solved via this way.

So i Post here.

.:MobileLife:. · 09-15-2014, 15:58

Quote:

Originally Posted by laxmi kamlesh

I Check This problem On 2 pice of GT-p3100 and solved via this way.

So i Post here.

Brother I have Samsung Grand G7102 dead with downgrade flashing I am trying direct emmc but getting same error.

Have any idea?

Best Regards.
Siddeque.

naslejavan · 09-16-2014, 18:31

same problem here

Z3X EasyJtag Software ver. 1.5.1.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 171xxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1381 mV
CMD Active Level:1825 mV
Can't init EMMC, Reason: CARD Operation Condition Timeout Error
===================================
Done.

06-09-2014, 07:43	#1 (permalink)
089999945 No Life Poster Join Date: Mar 2010 Location: Cambodia Posts: 4,210 Member: 1260512 Status: Offline Sonork: 100.1605447 Thanks Meter: 461	Can't init EMMC, Reason: CARD Operation Condition Timeout Error i try connect s3 no product name so like this Z3X EasyJtag Software ver. 1.5.1.0 Loading eMMC Addon Firmware... IO: 1850 mV Box S/N: 171xxxxxxxxxxx, ,FW Ver.: 01.50 CMD Pullup Level:1381 mV CMD Active Level:1825 mV Can't init EMMC, Reason: CARD Operation Condition Timeout Error =================================== Done. what problem ,pls help me all user and supporter.

06-09-2014, 08:18	#2 (permalink)
e_dcel Junior Member Join Date: Jun 2014 Posts: 13 Member: 2197560 Status: Offline Thanks Meter: 1	doudble chec wire or may be damage emmc br

06-18-2014, 07:44	#4 (permalink)
Asiatic Rebel Freak Poster Join Date: May 2012 Location: Turkey Age: 36 Posts: 136 Member: 1754273 Status: Offline Thanks Meter: 32	im 20 pcs VT EMMC "CARD Operation Condition Timeout Error" emmc dead

06-18-2014, 07:52	#5 (permalink)
NoName® Product Supporter Join Date: Mar 2005 Location: China Posts: 3,338 Member: 129885 Status: Offline Sonork: 100:1603514 Thanks Meter: 6,202	I wrote many many times ago. This kind of eMMC cards are not responding on most commands. Unable to make any operations. Only replacement. Connection are ok if you got this error.

07-01-2014, 17:17	#6 (permalink)
wissso Junior Member Join Date: Sep 2009 Location: lebanon Posts: 24 Member: 1116838 Status: Offline Sonork: 1122 Thanks Meter: 10	mmm i have the same prob

07-30-2014, 21:49	#9 (permalink)
kopito No Life Poster Join Date: May 2010 Location: Argentina Posts: 501 Member: 1314806 Status: Offline Sonork: 100.1000 Thanks Meter: 80	Z3X EasyJtag Software ver. 1.5.9.0 Loading eMMC Addon Firmware... IO: 1850 mV Box S/N: 0B00501xxxxx, ,FW Ver.: 01.50 CMD Pullup Level:1206 mV CMD Active Level:1577 mV Can't init EMMC, Reason: CARD Operation Condition Timeout Error =================================== Done.

09-11-2014, 21:40	#10 (permalink)
sa5663 Junior Member Join Date: May 2013 Posts: 4 Member: 1937595 Status: Offline Thanks Meter: 1	I am trying to read a SDIN5D2-2G eMMC chip using the esocket and the Z3X-Pro Easy Jtag device. The chip is recognized but when I try to read it I get the error "Read Check Failed, Reason: CARD Data FIFO Timeout Error". Can you tell me how to correct this error?

09-16-2014, 18:31	#15 (permalink)
naslejavan No Life Poster Join Date: Jul 2008 Posts: 525 Member: 815509 Status: Offline Sonork: jaghori Thanks Meter: 48	same problem here Z3X EasyJtag Software ver. 1.5.1.0 Loading eMMC Addon Firmware... IO: 1850 mV Box S/N: 171xxxxxxxxxxx, ,FW Ver.: 01.50 CMD Pullup Level:1381 mV CMD Active Level:1825 mV Can't init EMMC, Reason: CARD Operation Condition Timeout Error =================================== Done.