Dead after rpmb clean
 

:confused::confused::confused:
Hello members i need your help. I have cleaned rpmb successfully for 3 phones ie 2 pieces of a107f , and 1 piece of a127f yesterday. But the phone has failed to come back to life. the following are the steps i took.

1. I first made a backup of 2gb rom1, 4mb rom 2 and 4mb rom 3 and an extcsd from the emmc tool

2. I opened the classic suite and cleaned the rpmb.

3. I repaired extcsd with the backup i made earlier in step 1.

4. I opened emmc tool and wrote back the dump starting from rom2, rom3 then rom1.

TURNED ON THE PHONE BUT WAS STILL DEAD.

5. I then wrote pit, BL

TURNED ON THE PHONE BUT WAS STILL DEAD.

6. I then wrote the full flash file.

TURNED ON THE PHONE BUT WAS STILL DEAD.


AM STUCK, PLEASE HELP, WHAT AM I MISSING

Layder, your help will be appreciated. Am stuck people, 3 days but i havent received any support from this support forum. Other members answered but mine ignored. I have bought easy jtag plus for specifically kg lock. If there is mistake am doing in my posting, its better to point it out than ignoring my posts.

flash scatter firmware

Wrong answer..

There is no scatter for A127F..

It's exynos cpu not MTK

check boot configuration maybe its booting in wrong rom..also check cmd clk resistor carefully maybe get damage while doing isp