Dead after rpmb clean - GSM-Forum

Ashim Ashram · 10-10-2021, 06:17

Hello members i need your help. I have cleaned rpmb successfully for 3 phones ie 2 pieces of a107f , and 1 piece of a127f yesterday. But the phone has failed to come back to life. the following are the steps i took.

1. I first made a backup of 2gb rom1, 4mb rom 2 and 4mb rom 3 and an extcsd from the emmc tool

2. I opened the classic suite and cleaned the rpmb.

3. I repaired extcsd with the backup i made earlier in step 1.

4. I opened emmc tool and wrote back the dump starting from rom2, rom3 then rom1.

TURNED ON THE PHONE BUT WAS STILL DEAD.

5. I then wrote pit, BL

TURNED ON THE PHONE BUT WAS STILL DEAD.

6. I then wrote the full flash file.

TURNED ON THE PHONE BUT WAS STILL DEAD.

AM STUCK, PLEASE HELP, WHAT AM I MISSING

Ashim Ashram · 10-13-2021, 04:25

Layder, your help will be appreciated. Am stuck people, 3 days but i havent received any support from this support forum. Other members answered but mine ignored. I have bought easy jtag plus for specifically kg lock. If there is mistake am doing in my posting, its better to point it out than ignoring my posts.

beto yriizz · 11-16-2021, 17:20

flash scatter firmware

alamgarh · 01-19-2022, 20:58

Quote:

Originally Posted by beto yriizz

flash scatter firmware

Wrong answer..

There is no scatter for A127F..

It's exynos cpu not MTK

simpleprince49 · 06-14-2022, 18:52

check boot configuration maybe its booting in wrong rom..also check cmd clk resistor carefully maybe get damage while doing isp

10-10-2021, 06:17	#1 (permalink)
Ashim Ashram Freak Poster Join Date: Dec 2017 Location: Uganda Posts: 105 Member: 2793734 Status: Offline Thanks Meter: 22	Dead after rpmb clean Hello members i need your help. I have cleaned rpmb successfully for 3 phones ie 2 pieces of a107f , and 1 piece of a127f yesterday. But the phone has failed to come back to life. the following are the steps i took. 1. I first made a backup of 2gb rom1, 4mb rom 2 and 4mb rom 3 and an extcsd from the emmc tool 2. I opened the classic suite and cleaned the rpmb. 3. I repaired extcsd with the backup i made earlier in step 1. 4. I opened emmc tool and wrote back the dump starting from rom2, rom3 then rom1. TURNED ON THE PHONE BUT WAS STILL DEAD. 5. I then wrote pit, BL TURNED ON THE PHONE BUT WAS STILL DEAD. 6. I then wrote the full flash file. TURNED ON THE PHONE BUT WAS STILL DEAD. AM STUCK, PLEASE HELP, WHAT AM I MISSING

10-13-2021, 04:25	#2 (permalink)
Ashim Ashram Freak Poster Join Date: Dec 2017 Location: Uganda Posts: 105 Member: 2793734 Status: Offline Thanks Meter: 22	Layder, your help will be appreciated. Am stuck people, 3 days but i havent received any support from this support forum. Other members answered but mine ignored. I have bought easy jtag plus for specifically kg lock. If there is mistake am doing in my posting, its better to point it out than ignoring my posts.

11-16-2021, 17:20	#3 (permalink)
beto yriizz Junior Member Join Date: Dec 2019 Location: maputo Posts: 24 Member: 2941618 Status: Offline Thanks Meter: 4	flash scatter firmware

06-14-2022, 18:52	#5 (permalink)
simpleprince49 No Life Poster Join Date: Feb 2009 Location: inside apples a15 Posts: 886 Member: 975554 Status: Offline Sonork: KG state:prenormal Thanks Meter: 253	check boot configuration maybe its booting in wrong rom..also check cmd clk resistor carefully maybe get damage while doing isp