Easy JTAG 3.7.0.21-23 Release. Many Emmc firmware added.

[Medusin]

kmdv6001dm-b620 please support

[aslam hossain]

Easy JTAG 3.7.0.21-23 This Version Error Problem
Oppo Cph2095 Password Remove Problem

Check ISP connect.
Calibrate ISP.
VCC: 3302mV
VCCQ2: 1898mV

Chip Info:
Manufacturer: SAMSUNG
ProductName: KM8V8001JM-B813
SerialNumber: 49d59714230b
OemID: SAMSUNG_OEM_ID
Firmware Version: 1.9.0.0
UFS Version: 2.1

Maximum Number of LUs: 8
Number of LUs found: 6
LUN 0:
Block size: 0x1000
Size: 0x1D27000000 / 116,624,000,000B / 116GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 3:
Block size: 0x1000
Size: 0x2000000 / 0,032,000,000B / 32MB
LUN 4:
Block size: 0x1000
Size: 0x84800000 / 2,072,000,000B / 2GB
LUN 5:
Block size: 0x1000
Size: 0x1C000000 / 0,448,000,000B / 448MB
Number of W-LUs found: 1
W-LUN 0xC4 (RPMB):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0x1DCC800000 / 119,200,000,000B / 119GB

RPMB:
Counter: 1829

Health:
Device life time method A: 0x01 (0%-10% device life time used)
Device life time method B: 0x01 (0%-10% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)

Can't stop LU, Code: -406, Reason: UAP SCSI: Command sense: UNIT_ATTENTION
Done.

[aslam hossain]

EasyJtag Release v3.7.0.23.Bug on setup cant load soft.
Use this Tool Z3X EasyJtag EmmcManager-1.20
Work Good ✅✅
OPPO F17 (CPH2095) Password Remove Done ✅
Download Link...
https://drive.google.com/.../1rw3pyR...3c43ac.../view
PASS : 12345678

Wait for the next update EasyJtag Bug Fix.

[lpservice]

EasyJtag EmmcManager-v1.21. Where this link new version?

[sohail memon]

rpbm clean possible with isp pinout????

[aslam hossain]

Originally Posted by lpservice

EasyJtag EmmcManager-v1.21. Where this link new version?

Easy JTAG 3.7.0.21-23
https://www.androidfilehost.com/?fid...24697586342045

[rico_deep]

Originally Posted by lpservice

EasyJtag EmmcManager-v1.21. Where this link new version?

it's private version, so wait for public version

[hosster5]

Does anyone have the KLUDG4U1EA-B0C1 firmware.

[kompe]

rpbm clean possible with isp pinout????

[vamsi.738]

KLUDG4U1EA-B0C1

firmware update showing done,but not cleaned RPMB

[layder]

Originally Posted by vamsi.738

KLUDG4U1EA-B0C1

firmware update showing done,but not cleaned RPMB

for UFS chip ffu firmware update will be not clean data at chip and RPMB (W-LUN)

[vamsi.738]

Originally Posted by layder

for UFS chip ffu firmware update will be not clean data at chip and RPMB (W-LUN)

what is the possible way for changing ufs memory

[alamgir80]

Originally Posted by aslam hossain

Easy JTAG 3.7.0.21-23
https://www.androidfilehost.com/?fid...24697586342045

your link not 1.21 version
its EMMC File Manager v 1.20 at 19/03/2021

[Ashim Ashram]

Any one please help. ihave just bought the box but easy jtag box classic suite not detecting emmc but emmc opens in emmc tool


Found 1 serial devices
COM111 USB\VID_1781&PID_AAAC&REV_0100&MI_00 MediaTek USB VCOM (Android) (COM111)
Selected pinout: GEN2 High Speed Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.7.0.24
Loading eMMC GEN2 Firmware... IO: 2800 mV
Initial pull results:
clock: 167mV pin unconnected
command: 167mV pin unconnected
data0: 168mV pin unconnected
data1: 166mV pin unconnected
data2: 169mV pin unconnected
data3: 167mV pin unconnected
data4: 168mV pin unconnected
data5: 169mV pin unconnected
data6: 168mV pin unconnected
data7: 170mV pin unconnected
Box S/N: 3D358578033FFFDB, ,FW Ver.: 02.53
Box IO Level:2800 mV
CLK Rate:42000 kHz
Bus Width:8bit,SDR
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.

[M.S.khan]

@Mr Blang



Please update this FFU 100% tested
link