easy jtag not detecting any phone - GSM-Forum

BIGUNLOCKSERVER · 08-13-2013, 08:44

easy jtag not detecting any phone, cable done as show in software.
please help me to solve out, or any pic of cable modifecation.

thanks

**blang** · 08-13-2013, 13:07

Quote:

Originally Posted by BIGUNLOCKSERVER

easy jtag not detecting any phone, cable done as show in software.
please help me to solve out, or any pic of cable modifecation.

thanks

if you have gpg box, check this http://forum.gsmhosting.com/vbb/f672...odify-1691534/

BIGUNLOCKSERVER · 08-14-2013, 05:49

I GOT THIS BOX FROM RESELLER,PLEASE TELL ME WHAT NEED TO CHANGE IN THIS

BIGUNLOCKSERVER · 08-15-2013, 04:32

my new box is damage or need any changes in pinouts, please provide me picture of box and cable pinouts, coz pinout shows in software not working in my box.
br

NoName® · 08-15-2013, 08:24

Hi , if you shure that box are faultly , you need request replacement from your seller.

BIGUNLOCKSERVER · 08-15-2013, 12:28

i solder wires like shows in this pic, is this ok pinouts or not ?

BIGUNLOCKSERVER · 08-16-2013, 08:51

no reply from team,

br

cemalefendi · 08-16-2013, 23:50

you can see box pinout in program. why wait team?

BIGUNLOCKSERVER · 08-17-2013, 09:39

Quote:

Originally Posted by cemale*****

you can see box pinout in program. why wait team?

i know that,and i do as show in program. but not works. so i want to be sure that my box is damage or not.

cemalefendi · 08-17-2013, 10:20

if you have another jtag please try with . if working . dont desolder please put again easy jtag. because same pinout. you can understand . sorry my bad english

BIGUNLOCKSERVER · 08-18-2013, 07:25

easy jtag and riff pinouts are same ???
i have ort riff and easy jtag also,all pinouts are same ?

**blang** · 08-18-2013, 10:44

Quote:

Originally Posted by BIGUNLOCKSERVER

easy jtag and riff pinouts are same ???
i have ort riff and easy jtag also,all pinouts are same ?

yes. pinouts same. just try connect phone supported by both devices.

this is fast way for check or hardware of box ok.

BIGUNLOCKSERVER · 08-30-2013, 12:16

ok thanks all my friends, my problam is solved. the cable was damage. box working fine.

BIGUNLOCKSERVER · 08-30-2013, 12:20

Code:

EasyJtag Suite ver.: 1.0.62.2 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
Successefuly connected to box on COM3
Box S/N: xxxxxxxxxxxxxxxxx, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : xxxxxxxxxx
Z3X Card Version : xx
Z3X Card Activation [JTAG] : 1 
Resources ver. : MainRC ver.OCD040Z001 (C)2012 z3x-team.com
Loading repair file: 'E:\SETUP\Z3X\EASY JTAG\s5830\repair\Samsung GT-S5830_v1.00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-S5830, Ver.: 1.00
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.62.2 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-S5830 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: xxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T 
CPU IDCODE : 0x303C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x3
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.62.2 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-S5830 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: xxxxxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T 
CPU IDCODE : 0x303C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x3
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.62.2 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-S5830 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N:xxxxxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.62.2 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-S5830 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: xxxxxxxxxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T 
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
NAND Write OK! Elapsed time: 15.109375s (104.836 KiB/s)
NAND Writing QCSBL...
NAND Write OK! Elapsed time: 5.015625s (105.271 KiB/s)
NAND Writing OEMSBL1...
NAND Write OK! Elapsed time: 7.453125s (106.264 KiB/s)
NAND Writing APPSBL...
NAND Write OK! Elapsed time: 19.921875s (106.014 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 10.125000s (104.296 KiB/s)
All Done.
Start Z3X Jtag Pin Finder...
Successefuly connected to box on COM3
Waiting for box reset...
Box S/N: xxxxxxxxxxxxxxxxxxxx 
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 9 / TMS: Pin 7 / TDI: Pin 5 / TDO: Pin 13
CPU IDCODE : 0x303C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x3
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 3
Box S/N: 05050C1F2A20426B, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.

samsung s5830 dead boot repair done

BIGUNLOCKSERVER · 08-30-2013, 14:00

Code:

EasyJtag Suite ver.: 1.0.62.2 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
Successefuly connected to box on COM3
Box S/N: xxxxxxxxxxxxxx, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : xxxxxxxxxxx
Z3X Card Version : xxx
Z3X Card Activation [JTAG] : 1 
Resources ver. : MainRC ver.OCD040Z001 (C)2012 z3x-team.com
Loading repair file: 'E:\SETUP\Z3X\EASY JTAG\I9000\REPAIR\Samsung-GT-i9000.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9000, Ver.: 1.00
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.62.2 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-I9000 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: xxxxxxxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: S5PC110 
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing BOOT...
NAND Write OK! Elapsed time: 1.328125s (198.776 KiB/s)
NAND Writing PIT...
NAND Write OK! Elapsed time: 0.765625s (344.816 KiB/s)
NAND Writing SBL1...
NAND Write OK! Elapsed time: 9.140625s (144.410 KiB/s)
NAND Writing SBL2...
NAND Write OK! Elapsed time: 9.375000s (140.800 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 0.906250s (1165.241 KiB/s)
All Done.

08-13-2013, 08:44	#1 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	easy jtag not detecting any phone easy jtag not detecting any phone, cable done as show in software. please help me to solve out, or any pic of cable modifecation. thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-14-2013, 05:49	#3 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	I GOT THIS BOX FROM RESELLER,PLEASE TELL ME WHAT NEED TO CHANGE IN THIS

08-15-2013, 04:32	#4 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	my new box is damage or need any changes in pinouts, please provide me picture of box and cable pinouts, coz pinout shows in software not working in my box. br

08-15-2013, 08:24	#5 (permalink)
NoName® Product Supporter Join Date: Mar 2005 Location: China Posts: 3,320 Member: 129885 Status: Offline Sonork: 100:1603514 Thanks Meter: 6,173	Hi , if you shure that box are faultly , you need request replacement from your seller.

08-15-2013, 12:28	#6 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	i solder wires like shows in this pic, is this ok pinouts or not ?

08-16-2013, 08:51	#7 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	no reply from team, br

08-16-2013, 23:50	#8 (permalink)
cemalefendi No Life Poster Join Date: Nov 2006 Location: turkey Posts: 772 Member: 384775 Status: Offline Sonork: 100.1605469 Thanks Meter: 158	you can see box pinout in program. why wait team?

08-17-2013, 10:20	#10 (permalink)
cemalefendi No Life Poster Join Date: Nov 2006 Location: turkey Posts: 772 Member: 384775 Status: Offline Sonork: 100.1605469 Thanks Meter: 158	if you have another jtag please try with . if working . dont desolder please put again easy jtag. because same pinout. you can understand . sorry my bad english

08-18-2013, 07:25	#11 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	easy jtag and riff pinouts are same ??? i have ort riff and easy jtag also,all pinouts are same ?

08-30-2013, 12:16	#13 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	ok thanks all my friends, my problam is solved. the cable was damage. box working fine.