Easy-JTAG. Request the most wanted phones, which you want see in list of supported - Page 34 - GSM-Forum

SMD Expert · 10-06-2015, 02:36

Lumia 625 rm-941 boot repair and emmc support .....

spd3 · 10-06-2015, 04:13

g510 y300 emmx repair ???

ricardinhook · 10-13-2015, 20:51

waiting in vain

sm-g531f

thanks in advance

alrsbs · 10-14-2015, 18:00

plz add sony lt28 dll boot file

Muhammadsaqib11 · 10-16-2015, 15:51

please add this model.
SU630 already supported.
add this toooo hot.

srinibas · 11-26-2015, 06:58

Have HTC Desire U T327W with Qualcomm HS-USB QDloader 9008

Br - srinibas

Dante01 · 12-09-2015, 10:01

hi,
can anybody help me where are the JTAG points?

Leshiy0707 · 12-17-2015, 10:44

Htc T528d dead boot
isq 213-761-922

gabiz_ro · 12-18-2015, 21:21

Code:

Z3X EasyJtag Software ver. 2.0.6.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: XXXXXXXXXXXXXXXX, ,FW Ver.: 01.52
CMD Pullup Level:1794 mV
CMD Active Level:1887 mV
eMMC Device Information
EMMC CID : 15010038574D42335201881BEC94A118

EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 10/2014  Rev.0x1
EMMC NAME: <b>8WMB3R</b> , S/N: 2283531412
EMMC NAME (HEX): 38574D42335200 
EMMC ROM1 (Main User Data)   Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
  Extended CSD rev 1.7 (MMC Unknown)

Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01

Backup saved: 8WMB3R_2283531412_20151105_2205.extcsd
=============================================

  Extended CSD rev 1.7 (MMC 5.0)

=============================================


Card Supported Command sets [S_CMD_SET: 0x01]

HPI Features [HPI_FEATURE: 0x01]: 
implementation based on CMD13

Background operations support [BKOPS_SUPPORT: 0x01]

Max Packet Read Cmd [MAX_PACKED_READS: 0x3f]

Max Packet Write Cmd [MAX_PACKED_WRITES: 0x3f]

Data TAG support [DATA_TAG_SUPPORT: 0x01]

Data TAG Unit Size [TAG_UNIT_SIZE: 0x04]

Tag Resources Size [TAG_RES_SIZE: 0x00]

Context Management Capabilities [CONTEXT_CAPABILITIES: 0x05]

Large Unit Size [LARGE_UNIT_SIZE_M1: 0x07]

Extended partition attribute support [EXT_SUPPORT: 0x03]

Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x0a]

Power off notification [POWER_OFF_LONG_TIME: 0x3c]

Cache Size [CACHE_SIZE] is 65536 KiB

Background operations status [BKOPS_STATUS: 0x00]

1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x1e]

Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00]

Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00]

Power class for 200MHz at 3.6V [PWR_CL_200_360: 0x00]

Power class for 200MHz, at 1.95V [PWR_CL_200_195: 0x00]

Minimum Performance for 8bit at 52MHz in DDR mode:

 [MIN_PERF_DDR_W_8_52: 0x00]

 [MIN_PERF_DDR_R_8_52: 0x00]

TRIM Multiplier [TRIM_MULT: 0x02]

Secure Feature support [SEC_FEATURE_SUPPORT: 0x55]

Boot Information [BOOT_INFO: 0x07]

 Device supports alternative boot method

 Device supports dual data rate during boot

 Device supports high speed timing during boot

Boot partition size [BOOT_SIZE_MULTI: 0x20]

Access size [ACC_SIZE: 0x06]

High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01]

High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01]

Reliable write sector count [REL_WR_SEC_C: 0x01]

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x10]

Sleep current (VCC) [S_C_VCC: 0x07]

Sleep current (VCCQ) [S_C_VCCQ: 0x07]

Sleep/awake timeout [S_A_TIMEOUT: 0x11]

Sector Count [SEC_COUNT: 0x00e90000]

Minimum Write Performance for 8bit:

 [MIN_PERF_W_8_52: 0x00]

 [MIN_PERF_R_8_52: 0x00]

 [MIN_PERF_W_8_26_4_52: 0x00]

 [MIN_PERF_R_8_26_4_52: 0x00]

Minimum Write Performance for 4bit:

 [MIN_PERF_W_4_26: 0x00]

 [MIN_PERF_R_4_26: 0x00]

Power classes registers:

 [PWR_CL_26_360: 0x00]

 [PWR_CL_52_360: 0x00]

 [PWR_CL_26_195: 0x00]

 [PWR_CL_52_195: 0x00]

Partition switching timing [PARTITION_SWITCH_TIME: 0x01]

Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x05]

I/O Driver Strength [DRIVER_STRENGTH: 0x1f]

Card Type [CARD_TYPE: 0x57]

CSD structure version [CSD_STRUCTURE: 0x02]

Command set [CMD_SET: 0x00]

Command set revision [CMD_SET_REV: 0x00]

Power class [POWER_CLASS: 0x00]

High-speed interface timing [HS_TIMING: 0x00]

Erased memory content [ERASED_MEM_CONT: 0x00]

Boot configuration bytes [PARTITION_CONFIG: 0x38]

 No access to boot partition

Boot config protection [BOOT_CONFIG_PROT: 0x00]

Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x00]

High-density erase group definition [ERASE_GROUP_DEF: 0x00]

Boot write protection status registers [BOOT_WP_STATUS]: 0x00

Boot Area Write protection [BOOT_WP]: 0x00

Power ReadOnly locking: possible

Permanent ReadOnly locking: possible

Read Only lock status: not locked

User area write protection register [USER_WP]: 0x00

FW configuration [FW_CONFIG]: 0x00

RPMB Size [RPMB_SIZE_MULT]: 0x04

Write reliability setting register [WR_REL_SET]: 0x1f

Write reliability parameter register [WR_REL_PARAM]: 0x04

Enable background operations handshake [BKOPS_EN]: 0x00

H/W reset function [RST_N_FUNCTION]: 0x01

HPI management [HPI_MGMT]: 0x00

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

 Device support partitioning feature

 Device can have enhanced tech.

Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x000136

Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

General Purpose Partition Size
 [GP_SIZE_MULT_4]: 0x000000

 [GP_SIZE_MULT_3]: 0x000000

 [GP_SIZE_MULT_2]: 0x000000

 [GP_SIZE_MULT_1]: 0x000000

Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000

Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000

Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00

Periodic Wake-up [PERIODIC_WAKEUP]: 0x00

Program CID/CSD in DDR mode support [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x01

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[127]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[126]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[125]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[124]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[123]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[122]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[121]]: 0x21

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[120]]: 0x19

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[119]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[118]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[117]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[116]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[115]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[114]]: 0x01

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[113]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[112]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[111]]: 0x20

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[110]]: 0x0c

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[109]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[108]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[107]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[106]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[105]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[104]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[103]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[102]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[101]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[100]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[99]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[98]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[97]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[96]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[95]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[94]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[93]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[92]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[91]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[90]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[89]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[88]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[87]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[86]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[85]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[84]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[83]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[82]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[81]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[80]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[79]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[78]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[77]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[76]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[75]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[74]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[73]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[72]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[71]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[70]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[69]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[68]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[67]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[66]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[65]]: 0x00

Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[64]]: 0x0f

Native sector size [NATIVE_SECTOR_SIZE]: 0x00

Sector size emulation [USE_NATIVE_SECTOR]: 0x00

Sector size [DATA_SECTOR_SIZE]: 0x00

1st initialization after disabling sector size emulation [INI_TIMEOUT_EMU]: 0x00

Class 6 commands control [CLASS_6_CTRL]: 0x00

Number of addressed group to be released[DYNCAP_NEEDED]: 0x00

Exception events control [EXCEPTION_EVENTS_CTRL]: 0x0000

Exception events status[EXCEPTION_EVENTS_STATUS]: 0x0000

Extended Partitions Attribute [EXT_PARTITIONS_ATTRIBUTE]: 0x0000

Context configuration [CONTEXT_CONF[51]]: 0x00

Context configuration [CONTEXT_CONF[50]]: 0x00

Context configuration [CONTEXT_CONF[49]]: 0x00

Context configuration [CONTEXT_CONF[48]]: 0x00

Context configuration [CONTEXT_CONF[47]]: 0x00

Context configuration [CONTEXT_CONF[46]]: 0x00

Context configuration [CONTEXT_CONF[45]]: 0x00

Context configuration [CONTEXT_CONF[44]]: 0x00

Context configuration [CONTEXT_CONF[43]]: 0x00

Context configuration [CONTEXT_CONF[42]]: 0x00

Context configuration [CONTEXT_CONF[41]]: 0x00

Context configuration [CONTEXT_CONF[40]]: 0x00

Context configuration [CONTEXT_CONF[39]]: 0x00

Context configuration [CONTEXT_CONF[38]]: 0x00

Context configuration [CONTEXT_CONF[37]]: 0x00

Packed command status [PACKED_COMMAND_STATUS]: 0x00

Packed command failure index [PACKED_FAILURE_INDEX]: 0x00

Power Off Notification [POWER_OFF_NOTIFICATION]: 0x00

Control to turn the Cache ON/OFF [CACHE_CTRL]: 0x00

Searching for partition tables...
Detected GPT over MBR...
Medium UUID: AE420040-13DD-41F2-AE7F-0DC35854C8D7
Warning: Entries Count = 128
MMCBLK0P0 (DPP) Range:	[0X200000,0X9FFE00] ,Len: 800000
MMCBLK0P1 (MODEM_FSG) Range:	[0XA00000,0XB7FE00] ,Len: 180000
MMCBLK0P2 (MODEM_FS1) Range:	[0XC00000,0XD7FE00] ,Len: 180000
MMCBLK0P3 (MODEM_FS2) Range:	[0XE00000,0XF7FE00] ,Len: 180000
MMCBLK0P4 (MODEM_FSC) Range:	[0X1000000,0X1003E00] ,Len: 4000
MMCBLK0P5 (DDR) Range:	[0X1200000,0X1203E00] ,Len: 4000
MMCBLK0P6 (SSD) Range:	[0X1400000,0X1403E00] ,Len: 4000
MMCBLK0P7 (UEFI_BS_NV) Range:	[0X1600000,0X163FE00] ,Len: 40000
MMCBLK0P8 (UEFI_RT_NV) Range:	[0X1800000,0X183FE00] ,Len: 40000
MMCBLK0P9 (SBL1) Range:	[0X1A00000,0X1A7FE00] ,Len: 80000
MMCBLK0P10 (DBI) Range:	[0X1C00000,0X1C07E00] ,Len: 8000
MMCBLK0P11 (UEFI) Range:	[0X1E00000,0X1FFFE00] ,Len: 200000
MMCBLK0P12 (RPM) Range:	[0X2000000,0X207CE00] ,Len: 7D000
MMCBLK0P13 (TZ) Range:	[0X2200000,0X227CE00] ,Len: 7D000
MMCBLK0P14 (WINSECAPP) Range:	[0X2400000,0X247FE00] ,Len: 80000
MMCBLK0P15 (TZAPPS) Range:	[0X2600000,0X35FFE00] ,Len: 1000000
MMCBLK0P16 (BACKUP_SBL1) Range:	[0X3600000,0X367FE00] ,Len: 80000
MMCBLK0P17 (BACKUP_DBI) Range:	[0X3800000,0X3807E00] ,Len: 8000
MMCBLK0P18 (BACKUP_UEFI) Range:	[0X3A00000,0X3BFFE00] ,Len: 200000
MMCBLK0P19 (BACKUP_RPM) Range:	[0X3C00000,0X3C7CE00] ,Len: 7D000
MMCBLK0P20 (BACKUP_TZ) Range:	[0X3E00000,0X3E7CE00] ,Len: 7D000
MMCBLK0P21 (BACKUP_WINSECAPP) Range:	[0X4000000,0X407FE00] ,Len: 80000
MMCBLK0P22 (BACKUP_TZAPPS) Range:	[0X4200000,0X51FFE00] ,Len: 1000000
MMCBLK0P23 (PLAT) Range:	[0X5200000,0X59FFE00] ,Len: 800000
MMCBLK0P24 (EFIESP) Range:	[0X5A00000,0X79FFE00] ,Len: 2000000
MMCBLK0P25 (MAINOS) Range:	[0X8000000,0X9ADC7E00] ,Len: 92DC8000
MMCBLK0P26 (DATA) Range:	[0X9B000000,0X1D1FFBC00] ,Len: 136FFBE00
Done...Presets has been updated...

Done.

Z3X EasyJtag Software ver. 2.0.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1794 mV
CMD Active Level:1887 mV
Output file :H:\GSM\Z3X\Downloads\EMMC_ROM2_00000000_00400000.bin
Reading 0x000000400000 bytes from 0x000000000000 ...ROM2 ( BOOT1 ROM) 
Done. Read Speed: 642 kB/s

Z3X EasyJtag Software ver. 2.0.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1794 mV
CMD Active Level:1887 mV
Output file :H:\GSM\Z3X\Downloads\EMMC_ROM3_00000000_00400000.bin
Reading 0x000000400000 bytes from 0x000000000000 ...ROM3 ( BOOT2 ROM) 
Done. Read Speed: 667 kB/s


Z3X EasyJtag Software ver. 2.0.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1794 mV
CMD Active Level:1887 mV
Output file :H:\GSM\Z3X\Lumia 630\EMMC_ROM1_00000000_200000000.bin
Reading 0x000200000000 bytes from 0x000000000000 ...ROM1 ( USER ROM) 
Read Length has been corrected to 0x0001D2000000 bytes...

EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
Are empty, only 00 00

What to read?

genhack23 · 12-20-2015, 17:54

Quote:

Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)

gabiz_ro see the Boot part of log..

gabiz_ro · 12-20-2015, 21:36

Phone was in QHSUSB
Windows phone recovery tool try to recover but after first step nothing happens.
I used other files and manually upload them with thor2 (part of windows phone recovery software) phone was recovered.

That log is after phone was recovered,in working condition.
I have full dump,I'll send it with photos of EMMC pinout to support team,

the desaster · 12-20-2015, 22:08

add samsung galaxy s4 l720T sprint

sultan_ · 12-22-2015, 10:09

I need help to repair dead boot of LG G2 LS980

wasangaama · 02-19-2016, 06:12

Please Add
LG D325- L70 Via USB (Dump file in support aria but no writing Option in software)
and
LG su640 via usb

wasangaama · 02-19-2016, 07:03

MTK China Phones repair after wrong Preloader write.

10-13-2015, 20:51	#498 (permalink)
ricardinhook Junior Member Join Date: Jan 2015 Posts: 1 Member: 2332351 Status: Offline Thanks Meter: 0	waiting to be released waiting in vain sm-g531f thanks in advance

10-14-2015, 18:00	#499 (permalink)
alrsbs No Life Poster Join Date: Oct 2011 Location: srilanka Age: 32 Posts: 553 Member: 1674096 Status: Offline Thanks Meter: 49	plz add sony lt28 dll boot file plz add sony lt28 dll boot file

10-16-2015, 15:51	#500 (permalink)
Muhammadsaqib11 No Life Poster Join Date: Jun 2011 Location: pakistan Posts: 2,281 Member: 1602407 Status: Offline Sonork: 100.1648061 Thanks Meter: 360	LG-SU640 please add Boot repair please add this model. SU630 already supported. add this toooo hot.

10-06-2015, 02:36	#496 (permalink)
SMD Expert Freak Poster Join Date: Jun 2013 Location: Bombay. Age: 33 Posts: 252 Member: 1960501 Status: Offline Sonork: 100.1638964 Thanks Meter: 23	Lumia 625 rm-941 boot repair and emmc support .....

10-06-2015, 04:13	#497 (permalink)
spd3 No Life Poster Join Date: Dec 2013 Location: ecuador Posts: 808 Member: 2078045 Status: Offline Thanks Meter: 151	g510 y300 emmx repair ???

11-26-2015, 06:58	#501 (permalink)
srinibas No Life Poster Join Date: Apr 2007 Location: M W Balasore,Odisha,INDIA Age: 52 Posts: 12,752 Member: 492222 Status: Offline Sonork: 100.1594126 Thanks Meter: 10,377	Have HTC Desire U T327W with Qualcomm HS-USB QDloader 9008 Br - srinibas

12-09-2015, 10:01	#502 (permalink)
Dante01 Insane Poster Join Date: Sep 2005 Location: Hungary, Budapest Age: 45 Posts: 63 Member: 183034 Status: Offline Thanks Meter: 12	hi, can anybody help me where are the JTAG points?

12-17-2015, 10:44	#503 (permalink)
Leshiy0707 Junior Member Join Date: Mar 2012 Posts: 37 Member: 1737002 Status: Offline Sonork: 1612611 Thanks Meter: 2	Htc T528d dead boot isq 213-761-922

12-20-2015, 21:36	#506 (permalink)
gabiz_ro No Life Poster Join Date: May 2003 Location: Romania Age: 48 Posts: 515 Member: 29006 Status: Offline Thanks Meter: 28	Phone was in QHSUSB Windows phone recovery tool try to recover but after first step nothing happens. I used other files and manually upload them with thor2 (part of windows phone recovery software) phone was recovered. That log is after phone was recovered,in working condition. I have full dump,I'll send it with photos of EMMC pinout to support team,

12-20-2015, 22:08	#507 (permalink)
the desaster Freak Poster Join Date: Sep 2009 Location: france Posts: 106 Member: 1125925 Status: Offline Thanks Meter: 8	add samsung galaxy s4 l720T sprint

12-22-2015, 10:09	#508 (permalink)
sultan_ No Life Poster Join Date: May 2008 Posts: 2,434 Member: 770299 Status: Offline Sonork: 100.1603105 Thanks Meter: 1,029	I need help to repair dead boot of LG G2 LS980

02-19-2016, 06:12	#509 (permalink)
wasangaama Registered User Join Date: Dec 2009 Location: HABARADUWA - Sri Lanka Age: 39 Posts: 333 Member: 1179630 Status: Offline Sonork: 100.1644820 Thanks Meter: 80	Please Add LG D325- L70 Via USB (Dump file in support aria but no writing Option in software) and LG su640 via usb

02-19-2016, 07:03	#510 (permalink)
wasangaama Registered User Join Date: Dec 2009 Location: HABARADUWA - Sri Lanka Age: 39 Posts: 333 Member: 1179630 Status: Offline Sonork: 100.1644820 Thanks Meter: 80	MTK China Phones repair after wrong Preloader write.